Atlona AT-DIS7-PROHD User manual

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515
User Manual
AtlonA
7” PRO HD Monitor with HDMI,
VGA and Component Inputs
(up to 1080p or 1920x1200)
AT-DIS7-PROHD

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 2
TABLE OF CONTENTS
1. Introduction .................................................. 3
2. Appplications .................................................. 3
3. Package Contents .................................................. 3
4. Features .................................................. 4
5. Specication .................................................. 4
6. Operation Controls and Functions .................................................. 5
6.1. Front Panel .................................................. 5
6.2. Rear Panel .................................................. 5
7. Connection and Installation .................................................. 6
8. Atlona Product Registration .................................................. 6
9. Safety Information .................................................. 7
10. Warranty .................................................. 8

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 3
INTRODUCTION
PACKAGE CONTENTS:
APPLICATIONS
The Atlona AT-DIS7-PROHD is a 7” testing monitor designed for those looking to test cabling and the
installation of different components. This monitor is useful where displays are in a remote location or
not yet present. This portable display will recognize any HDMI, DVI, VGA or Component Video source
at resolutions up to 1080p or 1920x1200 (including a huge variety of other HDTV and Computer Reso-
lutions), and allow integrators and installers to observe both audio and video signals in real time. The
AT-DIS7-PROHD can be used to test 3D sources, even though it is not a 3D monitor; however when
3D signal will be sent to it, the monitor will display that it is receiving 3D content.
The AT-DIS7-PROHD is featured with tripod inputs on top and bottom of the unit and also the ability to
be rack-mounted (size 4U). The Rack Ears could be purchased separately.
Note: User can purchase an optional battery which can last approximately 5 hours, model # AT-BAT-DIS7PRO
• Residential or Commercial Installation. The AT-DIS7-PROHD is a very handy (must have) tool which
helps to make sure that all cables, extenders, switchers, AV receivers are passing proper signal before
the installation is nished. Most installations are done far before the displays arrive; Therefore DIS7-
PROHD is a perfect tool to make sure everything works. The DIS7-PROHD is recommended to be used
with AT-HD800 (HDMI Signal Generator) and it will allow installer to test every resolution, HDCP, EDID
and even 3D.
• Cable, Source Manufactures. Manufactures could be using DIS7-PROHD in their QC department to
make sure certain frequencies and resolutions are working.
• Monitoring. The AT-DIS7-PROHD is a perfect addition to any rack unit, allows user monitor all signals
which are going out and troubleshoot without walking around the building to look at the display which
could be 100’s of ft away. User can purchase a set of rack mounting ears: AT-RK-DIS7PRO. Total size
would be 4U
• Broadcast. The AT-DIS7-PROHD is a perfect tool for any camera man or video operator who wants to
quickly see what is being recorded or view some footage. The DIS7-PROHD has a tripod connection
on top and bottom.
• Atlona 7” PRO HD Monitor with HDMI, VGA and Component Inputs
• 5V/2.6A DC power adaptor (optional battery can be purchased Model: AT-BAT-DIS7PRO)
• VGA to Component Video Cable
• Manual

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 4
FEATURES:
SPECIFICATIONS:
• 7” PRO HDMI, DVI, VGA and Component Testing Display
• Supports Resolutions from 640x480 to 1920x1200 and 480p to 1080p
• HDMI 1.3c input which is fully compatible with DVI and able to accept all VESA DVI Resolutions
• HD15 input for testing VGA signals and component signals (VGA to Component Adapter is included)
• Professional Quality Display, offers great brightness and contracts
• Capable of 3D testing, when 3D content is being sent, the monitor will display a message “3D Content
is being Received”
• Supports Deep Color 24, 30 and 36 bit
• Built-in Speakers
• Manual panel button control
Screen size 7” diagonal
Max Input Resolution 1080p or 1920x1200
TDMS 6.75 Gbps
Inputs HDMI (DVI Compatible) and HD15 (VGA or Component Compatible)
Resolutions support 480i/p, 576i/p, 720p 50/60, 1080i 50/60, 1080p 50/60, VGA~WUXGA -
640x480 ~1920x1200 (includes all VESA Resolutions)
Refresh Rate 50/60 Hz
Deep Color Support 8, 10 and 12bit - per color (x3)
Embedded Speakers 2W
Tripod input holes 2 x 1/4”
Power Requirements 5V/1.9A (User can purchase an optional battery)
Dimensions (WxHxD) 7.7 x 7.1 x 1
Weight (unit only) 2.5LB
Power Supply 5V/2.6A DC (Universal)
Power Consumption 9.6W
Operating Temperature 0°C ~ 40°C / 32°F~104°F
Storage Temperature -20°C ~60°C / -4°F~140°F
Relative Humidity 20~90% RH (non-condensing)

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 5
OPERATION CONTROLS AND FUNCTIONS
6.1. Front Panel
1. Output Speakers: These are the two built-in speakers for sound.
2. DOWN: Press this button to lower the audio output volume.
3. UP: Press this button to raise the audio output volume.
4. INPUT: Press this button to select input signal from HDMI/DVI to VGA/Component
5. POWER & LED: Press this button to turns the DIS7-PROHD ON or OFF
6.2. Rear Panel
1. DC 5V: This input is for 5V power supply. If optional battery is used, the power supply is not required.
2. HDMI/DVI IN: This input is for user to connect a source device such as DVD, Cable Box, Generator or any
other. This input can be used for either HDMI or DVI sources
3. Tripod hole: The Tripod thread is ¼” designed for users to attach the DIS7-PROHD to a tripod.
4. VGA/COMPONENT INPUT: This input is for user to connect a source device such as DVD, Cable Box,
Computer, Generator or any other. This input can be used for either VGA to Component Video Sources; the
VGA to Component cable is included.

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 6
CONNECTION AND INSTALLATION
ATLONA PRODUCT REGISTRATION
Thank you for purchasing this Atlona product — we hope you’ll enjoy it.
We also hope that you’ll take a few moments to register your new purchase. Registration creates an ownership
record if your product is lost or stolen and helps ensure you’ll receive notication of performance issues and rmware
updates.
At Atlona, we respect and protect your privacy and assure you that your registration information is completely
secure. Of course, Atlona product registration is totally voluntary and failure to register will not diminish your limited war-
ranty rights.
To register go to www.atlona.com/registration
PC
Blu-Ray
DVD
or
or or
Notebook

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 7
SAFETY INFORMATION
Safeguards
To reduce the risk of electric shock, do not
expose this product to rain or moisture.
If the wall plug does not t into your local
power socket, hire an electrician to replace
your obsolete socket.
Do not modify the wall plug.
Doing so will void the warranty and safety
features.
This equipment should be installed near
the socket outlet and the device should
be easily accessible in case it requires
disconnection.
Precautions
FCC Regulations state that any
unauthorized changes or modications to
this equipment not expressly approved by
the manufacturer could void the
user’s authority to operate this
equipment.
Operate this product using only the
included external power supply. Use of
other power supplies could impair
performance, damage the product or cause
res.
In the event of an electrostatic discharge,
this device may automatically turn off. If this
occurs, unplug the device, and plug it back
in.
Protect and route power cords so they will
not be stepped on or pinched by anything
placed on or against them. Be especially
careful of plug-ins, or cord exit points from
this product.
Avoid excessive humidity, sudden
temperature changes or temperature
extremes.
Keep this product away from wet locations
such as bathtubs, sinks, laundries, wet
basements and swimming pools.
Use only accessories recommended by
ATLONA to avoid re, shock or other
hazards.
Unplug the product before cleaning. Use
a damp cloth for cleaning. Do not use
cleaning uid or aerosols, which could
enter the unit and cause damage, re or
electrical shock. Some substances may
also mar the nish of the product.
Never open or remove unit panels or make
any adjustments not described in this
manual. Attempting to do so could expose
you to dangerous electrical shock or other
hazards. It may also cause damage to your
AT-DIS7-PROHD. Opening the product will
void the warranty.
Do not attempt to service the unit. Instead
disconnect it and contact your Authorized
ATLONA reseller or contact ATLONA
directly.

www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 8
1. LIMITED WARRANTY
Atlona Technologies warrants that (a) its products (the “Product”) will perform substantially in accordance with the ac-
companying written materials for a period of 3 YEARS from the date of receipt and (b) that the Product will be free from
defects in materials and workmanship under normal use and service for a period of 3 years. In the event applicable law
imposes any implied warranties, the implied warranty period is limited to 3 years from the date of receipt. Some jurisdic-
tions do not allow such limitations on duration of an implied warranty, so the above limitation may not apply to Customer.
2. CUSTOMER REMEDIES
Atlona Technologies and its suppliers’ entire liability and Customer’s exclusive remedy shall be, at Atlona Technologies’
option, either return of the price paid for the Product, or repair or replacement of the Product that does not meet this
Limited Warranty and which is returned to Atlona Technologies with a copy of Customer’s receipt. This Limited Warranty
is void if failure of the Product has resulted from accident, abuse, or misapplication. Any replacement Product will be war-
ranted for the remainder of the original warranty period or 3 year, whichever is longer.
3. NO OTHER WARRANTIES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATLONA TECHNOLOGIES AND ITS SUPPLIERS
DISCLAIM ALL OTHER WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IM-
PLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO
THE PRODUCT AND ANY RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMER SPE-
CIFIC LEGAL RIGHTS. CUSTOMER MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.
4. NO LIABILITY FOR DAMAGES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL ATLONA TECHNOLOGIES OR
ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, IN-
CIDENTAL, CONSEQUENTIAL, OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING
OUT OF THE USE OF OR INABILITY TO USE THIS PRODUCT, EVEN IF ATLONA TECHNOLOGIES HAS BEEN AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY CASE, ATLONA TECHNOLOGIES’ AND ITS SUPPLIERS’
ENTIRE LIABILITY UNDER ANY PROVISION OF THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTU-
ALLY PAID BY YOU FOR THE PRODUCT. BECAUSE SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.