ATTO Technology ATTO ExpressPCI FC 3300 Manual

Fibre Channel
155 CrossPoint Parkway • Amherst, NY 14068 • 716.691.1999
attotech.com
The ATTO ExpressPCI FC 3300 host adapter
provides support for 2-Gigabit/sec.
Fibre Channel and features automatic
speed negotiation capability. This allows for
complete compatibility with existing 1-Gigabit/
sec. Fibre Channel Storage Area Networks
(SANs), while allowing seamless upgrades
to higher speed 2-Gigabit/sec. SANs.
The ExpressPCI FC 3300 PCI offers a unique
combination of hardware and software
features that allows users to measure
storage performance and easily configure
storage.
In addition to our ExpressPCI FC family of
products, ATTO recently released a new
line of Fibre Channel adapter products,
Celerity FC. Designed to provide reliable
connectivity, intelligence and scalability,
Celerity FC storage adapters meet tomorrow’s
connectivity needs today. With several
2-Gb and 4-Gb product options, Celerity FC
takes storage connectivity to the
next level.
2.125-Gigabit Fibre Channel Host Adapter
With a Fixed Short-wave Optical LC Connector
ATTO ExpressPCI FC 3300
• 2.125-Gigabit Fibre Channel
host adapter
• 400 MB/sec. throughput in
full-duplex mode
• Fixed Short-wave optical LC connector
• Support for SNIA HBA API
• 64-bit/66 MHz PCI-X interface
• Optimized Fibre Channel and
SCSI-3 algorithms
• Advanced data interleave architecture
• Full multiple block buffering
TECHNICAL
HIGHLIGHTS

Fibre Channel
Hardware Specifications
Fibre Channel Interface:
• 2.125-Gigabit data-transfer rates
• 400 MB/sec. throughput in full-duplex mode
• Auto-negotiation between
2-Gigabit and 1-Gigabit speeds
• Short-Wave Optical LC connector
• Supports all Fibre Channel topologies
• Point-to-Point
• Arbitrated Loop
• Direct Fabric/Switch Attach
• Strict adherence to ANSI FC-AL-2, FC-PLDA
FC-Tape, and FC-FLA specifications
• Supports Class 2, Class 3 and Intermix
transfers
• Flash ROM for easy field upgrades
Advanced FC Features:
• Support for SNIA HBA API
• LUN Masking
• Supports Target and Initiator Modes
Advanced SCSI-FCP Support:
• Large command FIFO
• Asynchronous I/O support
• ASPI and SCSI Manager 4.3 compatible
• SCSI-3 tagged command queuing
• Bootable from attached disks
• Support for multiple block sizes
Accelerated PCI Bus Management:
• PCI bus master rate of 528 MB/sec.
• PCI 2.2 compliant
• 64-bit/66 MHz PCI-X (backward compatible
with 32-bit and 33 MHz PCI)
Software Specifications
Driver Support:
•Windows® 2000
• Windows XP
• Windows Server 2003
• Solaris (x86 and SPARC)
• Mac® OS X
• Mac OS 9
Advanced Data Streaming (ADS™):
• Improved PCI system bandwidth use
• Optimized FC and SCSI-3 algorithms
• Tagged command queuing
• RISC processor for high performance
RAID kits available
ATTO ExpressPCI FC 3300
Environmental & Physical
Characteristics
Dimensions:
• Full Form Factor: 4.200” x 6.521”
Operating Environment:
• Temperature: 0-50º C
• Humidity: 10-90% non-condensing
• Airflow: 100 LFM (min.)
Power:
• 1 Amp @ 5 Volts
PCI Signal Compatibility:
• 3.3 Volts/5 Volts universal
Configuration:
•Easy to install connection plate with LED
to monitor on-line and fault status
©2004 ATTO Technology, Inc. Specifications subject to change without notice. Rev 09/05
LED indicates
online status
LED indicates
fault
conditions Optical LC
connector
Fibre Channel Host Adapter
Selection Chart
*Microsoft, Windows, and the Windows logo are trademarks,
or registered trademarks of the Microsoft Corporation in the
United States and/or other countries
*