Aube Technologies TH401 User manual

Owner’s Guide
Guide du propriétaire
Guía del usuario
TH401
Non-programmable Thermostat
Thermostat non programmable
Termostato no programable 400-401-000-B
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 1 Thursday, July 9, 2009 2:24 PM

Need Help?
We are here to help. Call 1-800-831-2823.
Besoin d’aide?
Nous sommes là. Composez le 1 800 831-2823.
¿Asistencia?
Estamos aquí para ayudarlo. Llame al 1 800 831-2823.
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 2 Thursday, July 9, 2009 2:24 PM

Owner’s Guide
ENGLISH
About your new thermostat ........................................................................................... 1
Temperature display and setting ................................................................................... 2
Removing the faceplate................................................................................................. 3
Wiring ............................................................................................................................ 4
Installing the faceplate................................................................................................... 5
Setup procedure............................................................................................................ 6
Setup menu ................................................................................................................... 7
In case of difficulty......................................................................................................... 8
Specifications ................................................................................................................ 9
Warranty ...................................................................................................................... 10
Customer assistance....................................................................................................11
Table of contents
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 0 Thursday, July 9, 2009 2:24 PM

Owner’s Guide
1
ENGLISH
This thermostat can be used to control an electric heating system such as a
baseboard heater, a radiant floor, a radiant ceiling, a convector or a fan-forced
heater.
The thermostat CANNOT be used with:
• a resistive load under 0.83 A
• a resistive load over 10.4 A
• a system driven by a contactor or a relay (inductive load)
• a central heating system
SUPPLIED PARTS
• One (1) thermostat
• Two (2) 6-32 mounting screws
• Two (2) solderless connectors
About your new thermostat
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 1 Thursday, July 9, 2009 2:24 PM

RTH401
ENGLISH
2
The thermostat normally displays the actual (ambient) temperature.
• To view the setpoint temperature, briefly press the Up or Down button. The setpoint will
be displayed for 5 seconds and the screen illuminated for 12 seconds.
• To change the setpoint temperature, press the Up or Down button until the desired
value is displayed.
Temperature display and setting
Temperature display
Heating intensity indicator.
(No image appears when
heating is off.)
Up button
Down button
Appears when the setpoint is displayed
Appears when the thermostat
is configured for 5-minute
cycles. The thermostat must be
set to this configuration if it is
controlling a fan-forced heater.
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 2 Thursday, July 9, 2009 2:24 PM

Owner’s Guide
3
ENGLISH
TURN OFF POWER OF THE HEATING SYSTEM AT THE MAIN POWER
PANEL TO AVOID ELECTRIC SHOCK.
Loosen the screw holding the faceplate to
the base. The screw cannot be completely
removed and remains captive on the base.
Remove the faceplate from the base by
pulling the bottom half.
Removing the faceplate
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 3 Thursday, July 9, 2009 2:24 PM

RTH401
ENGLISH
4
Connect any one of
thermostat wires to the
heater (load) wire and the
other one to the power
supply wire using solderless
connectors for copper wires.
(The thermostat wires are
non-polarized; either wire
can be connected to the load
or to the power supply.)
NOTE: All cables and connections must conform to the local electrical code.
Special CO/ALR solderless connectors must be used when connecting with
aluminium conductors.
Wiring
2-wire installation 4-wire installation
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 4 Thursday, July 9, 2009 2:24 PM

Owner’s Guide
5
ENGLISH
Install the base onto an electrical
box.
Reinstall the faceplate on the base
and secure it in place with the
screw.
NOTE: Keep the air vents of ther-
mostat clean and unobstructed at
all times.
Installing the faceplate
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 5 Thursday, July 9, 2009 2:24 PM

RTH401
ENGLISH
6
The setup menu is shown on the following page.
nPress the Up and Down buttons simultaneously for three seconds to enter
the setup menu.
oPress the Up or Down button to change the option.
pPress the Up and Down buttons simultaneously for one second to advance
to the next parameter.
qWhen the last parameter is displayed, press the Up and Down buttons for
three seconds to save any changes and exit the menu.
NOTE:
If you do not press any button for one minute, the thermostat will automati-
cally save any changes you have made and will then
return to its normal display .
Setup procedure
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 6 Thursday, July 9, 2009 2:24 PM

Owner’s Guide
7
ENGLISH
Setup menu
Parameter Options Display and
default setting
Temperature display format •°C
•°F
Heating cycle • Std (conventional heating): 15 seconds
• Fan (fan-forced heating): 5 minutes
Minimum setpoint 5°C - 20°C (41°F - 68°F)
Maximum setpoint 15°C - 30°C (59°F - 86°F)
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 7 Thursday, July 9, 2009 2:24 PM

RTH401
ENGLISH
8
In case of difficulty
PROBLEM SOLUTIONS
Thermostat is hot. This is normal.
Displayed tempera-
ture is wrong.
Remediate if any the following conditions exists:
• The thermostat is exposed to air draft.
• The sticker on the thermostat’s screen has not been removed.
• The thermostat is located near or above a heat source such as
a light dimmer.
Display disappears
and reappears after
a few minutes.
The thermal protection device on the heater has temporarily
opened. This can happen if the heater is obstructed by furniture or
curtain and has overheated, or if the heater’s thermal protection
device is too sensitive.
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 8 Thursday, July 9, 2009 2:24 PM

Owner’s Guide
9
ENGLISH
- Supply: 120/240 VAC, 50/60 Hz
- Minimum load: 0.83 A (resistive only)
200 W @ 240 VAC
100 W @ 120 VAC
- Maximum load: 10.4 A (resistive only)
2500 W @ 240 VAC
1250 W @ 120 VAC
- Display range: 0°C to 50°C (32°F to 122°F)
- Setpoint range: 5°C to 30°C (40°F to 85°F)
- Storage: -20°C to 50°C (-4°F to 120°F)
- Heating cycle length: 15 seconds / 5 minutes (user-selectable)
- Permanent memory: You do not need to adjust the temperature following a power outage.
Specifications
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 9 Thursday, July 9, 2009 2:24 PM

RTH401
ENGLISH
10
Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal
use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the war-
ranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's
option).
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or
(ii) contact Honeywell. Honeywell will make the determination whether the product should be returned, or whether a
replacement product can be sent to you.
This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that
the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.
Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL
SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSE-
QUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY,
EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some provinces, states or regions do not allow
the exclusion or limitation of incidental or consequential damages, so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION
OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE, IS HEREBY LIMITED TO THE THREE-YEAR DURATION OF THIS WARRANTY. Some provinces,
states or regions do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to
you.
This warranty gives you specific legal rights, and you may have other rights which vary from one province, state or region to
another.
Warranty
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 10 Thursday, July 9, 2009 2:24 PM

Owner’s Guide
11
ENGLISH
If you have any questions about the product installation or operation, contact us at:
705 Montrichard
Saint-Jean-sur-Richelieu, Quebec
J2X 5K8
Canada
Tel.: [phone]
Fax: [phone]
Email: [e-mail]
For more information on our products, go to
www.aubetech.com
Customer assistance
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 11 Thursday, July 9, 2009 2:24 PM

Guide du propriétaire
FRANÇAIS
À propos du thermostat ................................................................................................. 1
Affichage et réglage de la température ......................................................................... 2
Enlever la façade........................................................................................................... 3
Branchement ................................................................................................................. 4
Installer la façade .......................................................................................................... 5
Procédé de configuration .............................................................................................. 6
Menu de configuration................................................................................................... 7
En cas de difficulté ........................................................................................................ 8
Fiche technique ............................................................................................................. 9
Garantie....................................................................................................................... 10
Service à la clientèle ....................................................................................................11
Table des matières
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 0 Thursday, July 9, 2009 2:24 PM

Guide du propriétaire
1
FRANÇAIS
Ce thermostat a été conçu pour commander un appareil de chauffage électrique
tel qu’une plinthe chauffante, un plancher chauffant, un plafond radiant, un
convecteur ou un ventiloconvecteur.
Ce thermostat NE PEUT être utilisé avec :
• une charge résistive inférieure à 0,83 A
• une charge résistive supérieure à 10,4 A
• un appareil muni d’un contacteur ou d’un relais (charge inductive)
• un système de chauffage central
PIÈCES FOURNIES
• Un (1) thermostat
• Deux (2) vis de montage 6-32
• Deux (2) connecteurs sans soudure
À propos du thermostat
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 1 Thursday, July 9, 2009 2:24 PM

RTH401
2
FRANÇAIS
Le thermostat affiche normalement la température mesurée (ambiante).
• Pour afficher la température de consigne, appuyer brièvement sur le bouton Haut ou Bas. La
température de consigne sera affichée pendant 5 secondes et l’écran sera rétroéclairé pendant 12
secondes.
• Pour modifier la température, appuyer sur le bouton Haut ou Bas jusqu’à ce que la valeur désirée
soit affichée.
Affichage et réglage de la température
Affichage de la température
Indicateur de l’intensité du
chauffage (l’absence de
l’image indique l’arrêt du
chauffage.)
Bouton Haut
Bouton Bas
Apparaît lorsque la consigne est affichée
Apparaît lorsque le thermostat
est configuré pour des cycles de
5 minutes. S’assurer d’utiliser
cette configuration si vous avez
un ventiloconvecteur.
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 2 Thursday, July 9, 2009 2:24 PM

Guide du propriétaire
3
FRANÇAIS
COUPER L’ALIMENTATION DU SYSTÈME DE CHAUFFAGE AFIN D’ÉVITER
TOUT RISQUE DE CHOC ÉLECTRIQUE.
Desserrer la vis qui retient la façade du
thermostat à la base. La vis ne peut être
complètement enlevée et reste captive sur
la base. Séparer la façade de la base en
tirant sur la partie inférieure du thermostat.
Enlever la façade
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 3 Thursday, July 9, 2009 2:24 PM

RTH401
4
FRANÇAIS
Relier n’importe quel fil du
thermostat au fil de l’appareil
de chauffage (charge) et
l’autre fil au fil de
l’alimentation en utilisant des
connecteurs sans soudure
pour fils de cuivre. (Les fils
du thermostat ne sont pas
polarisés; le sens du
branchement n’a donc
aucune importance.)
NOTA : Tous les câbles et les raccordements doivent être conformes au code
d’électricité local. Pour le raccordement à des fils en aluminium, employer des
connecteurs identifiés CO/ALR.
Branchement
Installation à 2 fils Installation à 4 fils
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 4 Thursday, July 9, 2009 2:24 PM

Guide du propriétaire
5
FRANÇAIS
Installer la base sur une boîte
électrique.
Remettre la façade du thermostat
sur la base et resserrer la vis.
NOTA : Garder les ouvertures
d’aération du thermostat propres et
dégagées en tout temps.
Installer la façade
400-401-000-B (TH401) 5 x 3.5 EFS.book Page 5 Thursday, July 9, 2009 2:24 PM