AUDAC R2 User manual
R2
User Manual
www.audac.eu
Index
Introduction 5
Environment 7
Safety requirements 9
Caution servicing9
Chapter 1: Pin connections and connectors 11
Attention 11
Chapter 2: Overview front and rear panel 13
Front description 13
Rear description 14
Audio in- and outputs 14
Priority, S/PDIF & Fiber link inputs 14
Peripheral interfaces 15
Control ports 15
Chapter 3: Wire up the system 15
Chapter 4: R2 Quick start guide 16
Connecting the R2 16
Configuring the R2 17
Chapter 5: User interface & configuration 19
Open the user interface 19
Login screen 19
Main screen 20
Zone settings 21
Sound settings 22
Test signals 23
Zone linking 24
Input selection 25
Configuration settings screen 26
Digital input selection 26
Timer settings 27
Time settings 28
Network settings 29
Paging settings 29
Priority settings 30
System configuration 31
R2 Address settings 32
Fiber settings 33
Amplifier bridging 34
Password settings 34
Factory settings 35
Lite User Interface 36
Login screen 36
Main screen 36
iPhone + iPad 37
Chapter 6: Peripheral interfaces 38
Wall mounted control panels 39
DW3018/4018 Basic wall panel 39
DW5065 All-in-one wall panel 40
Connection possibilities 41
Chapter 7: Paging 43
Chapter 8: Cascading the R2 46
Principle 48
Fiber audio flow 48
Setting up the project 50
Connection possibilities 39
Chapter 9: Additional information 53
IP Basics 53
Updating the R2 54
Technical specifications 55
Personal notes 56
5
Introduction
Multi-Zone Audio Matrix System
5
Environment
9
Safety requirements
CAUTION - SERVICING
NOTE
599599599
Chapter 1
Pin connections and connectors
Cinch (RCA):
Tip Sleeve
White Red
RJ45 (RS485, Digital Audio, +24V DC):
Pin 1
Pin 2
Pin 3
Pin 4 5
Pin 5 5
Pin 6
Pin 7
Pin 8
ATTENTION
RS232 (serial connection interface):
Connection
PIN 2
PIN 3
PIN 5
Settings9
RS232 / RS485 / TCP/IP
5
Chapter 2
Overview front & rear panel
R2
9
Front
Audio in- and outputs
Priority, S/PDIF & Fiber
Rear
5
Peripheral interfaces
5
5
5
Control ports
Chapter 3
Wire up the system
5
55
5
55
5
Chapter 4
R2 Quick start guide
This chapter guides you through the setup process of a basic project with one R2 audio matrix
and 8 standard DW3018/4018 wall panels.
Overview of the R2 setup
Connecting the R2
1) Connecting audio sources
2) Connecting amplifiers and/or speakers
3) Connecting wall panels
5
4) Connecting a computer
99
Prog.
Vol
+
-
+
-
Prog.
Vol
+
-
+
-
Prog.
Vol
+
-
+
-
Prog.
Vol
+
-
+
-
Prog.
Vol
+
-
+
-
Prog.
Vol
+
-
+
-
Prog.
Vol
+
-
+
-
Prog.
Vol
+
-
+
-
Configuring the R2
1) Changing the IP address
99
2) Changing the password
3) Configuring wall panels and sources
55
Ready
9
Chapter 5
User interface & configuration
99
555555
Open the user interface
Start your default web browser and enter in the address bar the IP address of the embedded web server of the
R2. (The factory default IP address is http://192.168.0.191).
If multiple R2’s are cascased with each other through the fiber interconnection interface, first a selection screen
will be displayed whereby the R2 should be selected which you want to control.
Login screen
administratoruser
administrator
user
NOTE
Main screen
Volume control
Assign zone names
Connection status
Input channel selection
Configuration menu
Main screen
Other manuals for R2
2
Table of contents
Other AUDAC Stereo System manuals
