Audibax Seattle 500 SUB User manual

Seattle 500 SUB
Please read the manual before using the product
USER´S
MANUAL
3
Seattle 500 SUB
Specifications
Model No.
Seattle 500 SUB
Type
Compact line array
Frequency Response (-6dB)
45 Hz - 20 kHz
Max. SPL (1m, free space)
121 dB
Power Output (RMS)
300W + 100W + 100W
Transducer MF
4" steel frame woofer, 1" voice coil
Transducer HF
Pizeo. Tweeter
Transducer LF
15" subwoofer, 2.5" VC
Amplifier
2.1 Class-D Amplifier
Protection
Short circuit overheating, over-current
Function
MP3 player / BT 5.0 / ECHO
Indicators
Power, signal, limit
Audio Input / Output Left / Right Combo XLR/Jack input, 1 * Balanced RCA input, 2 *
XLR output, 2 * Speakon output
SUB Cabinet
15 mm MDF/ regular painting / Metal grille
Satellite
PP cabient / Metal grille
Power Input / Output
AC input
Power Supply
115/230V 60/50Hz

Seattle 500 SUB USER´S
MANUAL
1 2
Please read and keep all safety and use instructions. Important Safety Instructions
Refer to the user manual for more information about your Seattle 500 SUB
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the manufactu-
rer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produces heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding-type plug
has two blades and a third grounding prong. The wider blade or third prong is
provided for your safety. If the provided plug does not fit in your outlet, consult an
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles, and the point where it exits from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified personnel. Servicing is required when the apparatus
has been damaged in any way such as power-supply cord or plug is damaged,
liquid has been spilled or objects have falleninto the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNINGS/CAUTIONS:
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.
This symbol on the product means there is uninsulated, dangerous voltage
within the product enclosure that may present a risk of electrical shock.
This symbol on the product means there are important operating and
maintenance instructions in this guide.
Contains small parts which may be a choking hazard. Not suitable for
children under age 3.
This product contains magnetic material. Consult your physician on whether
this might affect your implantable medical device.
1. LCD Display: Mode, fast forward, reverse, single cycle, pause/play
*BT pair connecting: select BLUE in MODE on 2 speakers;
2. USB: Insert the USB into the card slot to play the stored music.
3. SD: Put it in the SD card slot and play the stored music.
4. Jack Input: Balanced L/R 6.3mm Jack input for getting signals from mixers or preamplifiers.
5. MIC Volume Control: Adjust the volume of microphone.
6. MIX Out: Balanced XLR connectors connected in parallel to the inputs to connect another
device (e.g. another active speaker system)
7. Speaker Out: Balanced RCA connectors connected in parallel to the inputs to connect
speaker.
8. Indicator Light / Phase Switch: Limit / Power indicator light, allows user to reverse phase
180°.
9. Sub Volume Control: Adjust the volume of subwoofer.
10. FREQ Volume Control: Adjust the volume of FREQ.
11. Master Volume Control: Adjust the master volume.
12. MP3/BT Volume Control: Adjust the volume of MP3/BT.
13. XLR Input: Balanced L/R XLR input for getting signals from mixers or preamplifiers.
14. ECHO Volume Control: Adjust the volume of ECHO.
15. MIC XLR Input: Balanced MIC1/MIC2 XLR input for getting signals from mixers or
preamplifiers.
16. Power Supply Voltage Switch: Select between 115V or 230V AC mains power.
17. Power Switch: Turns unit on or off.
18. AC Input: 115V-60Hz / 230V-50Hz power input.
System Setup
Connections and Controls