Audio Visual Furniture LE4001 User manual

VF
I
Assembly Instructions
LE4001 Lectern
Thank you for purchasing AVFI’s LE4001 Lectern.
Confirm all hardware is included before you begin assembly.
Read these instructions start to finish before beginning installation.
Note: If you cannot understand these instructions or are concerned about safety of the installation contact a qualified
contractor or contact AVFI at 1-877-834-3876
Supplied Parts
CAM connector
(12)
Wood Dowel
(8)
1
www.video-furn.com 288 Don Hillock Drive |Aurora |Ontario|L4G 0G9 | 1.877.834.3876
Metal Dowel
(6) Philips Screwdriver (+) 4mm (5/32”) Hex key
Column
Top
Bottom
Supplied Hardware: Tools required
Inserting fasteners:
1
Expanding
Dowel
(6)
Push in
Push in.
Do not turn till
next step
Use screwdriver
On Metal dowels

VF
I
Assembly Instructions
LE4001 Lectern
www.video-furn.com 288 Don Hillock Drive |Aurora |Ontario|L4G 0G9 | 1.877.834.3876
Attach Column to Bottom. Using Hex Key tighten CAM Connectors.
2
3Attach Top to Column. Using Hex Key tighten CAM Connectors. Dowels expand.
2
Assembly is complete, enjoy your lectern.