AUDIOLINE SENSOR 500 User manual

When you first connect your Sensor 500 and are using Telecom Call Minder
service you will need to program the PLAY button.
•Press
•Press and hold down until the display shows text, then release
•Dial 083210.
•Press
•Dial your call minder PIN number. (Please note that this number will
show on the display each time the key is pressed.)
•Press #
•Press
•Dial “1”
•Press to store
•Press to finish.
SENSOR 500 INITIAL SETUP
On pages 5 & 6 of this manual, references to the display showing:”--------”
should read: display showing “INSERT 10/0”
If you are a Centrex user, the phone needs to be programmed to insert “10”
If you are not using Centrex, the phone must be set to insert “0”
•Press and hold until diplay shows: “INSERT 10/0”.
•Press to select.
•Press to select “0” or “10” (current selection will flash).
•For Centrex “10” must be flashing.
•For Non-Centrex “0” must be flashing.
•Press to set.