Audiopipe 1600W User manual

We recommend to have the installation done by an Authorized Audiopipe Dealer.
We recommend the fuse to be installed no more than 12 inches from the battery. The
ground wire should be connected directly with the chassis of your vehicle which should
be metal to metal ground point connection. The amplifier must be mounted securely at a
solid, dry and low vibration surface in the trunk or passenger area. Fix the amplifier in an
open air area to insure proper heat dissipation. Fix the amplifier in a place where can
access easily to set the input controllers. Install all amplifier cables as far as possible from
car electrical cables such as the car ignition cable.
Congratulations!
Thank you for purchasing this Audiopipe amplifier for your car audio system. Now you
own an amplifier of uncompromising design and engineering incorporating the latest
advanced circuit technology. You will discover soon that our amplifiers display optimum
sound with high quality and provide reliable performance.
Audiopipe amplifiers are adopted by advanced craftsmanship which use the highest
quality components and strict quality control system. In order to provide you the best
performance. We recommend you to contact an authorized Audiopipe Dealer to do the
installation.
Please read this manual thoroughly to ensure that you can get the maximum benefit
from this new amplifier. When you install it properly, this unit will provide you years of
trouble-free performance.
Congratulations on your purchase of the Audiopipe Power Amplifier. We are committed
to high-quality music reproduction, and we are confident that you will be pleased with your
purchase. These products provide optimum performance, which we are sure you will enjoy
for years to come.
For maximum performance Audiopipe recommends having your amplifier installed by an
authorized Audiopipe dealer.
- 1 -
English

- 2 -
English
APSM-55100
1. SUB Output
2. Front Right Speaker Output
3. Rear Right Speaker Output
6. Power +12VDC
7. Remote Lead Input
8. Ground
4. Front Left Speaker Output
5. Rear Left Speaker Output
1
1
678
3 5
2 4
1. Rear HPF Control
2. Front HPF Control
3. Rear Filter Select Switch
4. Front Filter Select Switch
5. SUB GAIN Control
6. Front GAIN Control
7. Front Right RCA Input Jack
8. Front Left RCA Input Jack
9. Rear Right RCA Input Jack
10. Rear Left RCA Input Jack
11. SUB Input
12. Rear GAIN Control
13. SUBSONIC
14. Low Pass Filter Control
15. Remote Lead Input
16. Power/Protection Indicator LED
2 4 6 7 9 11 12
1 3 5 8 10 11
14 15 16
13
FRONT

- 3 -
English

- 4 -
English
5-Channel Operation

•
•
•
•
Problem
Solution
Run indicator doesn’t light up.
Check all fuses on the amplifier.
Check main fuse near battery.
Check plus and minus battery cables..
Check remote voltage.
•
•
•
•
Problem
Solution
Run indicator is on but not sound.
Check volume control on the radio.
Check GAIN regulator on the amplifier.
Check RCA cables and connections.
Check speaker cables and connections.
•
•
•
•
Problem
Solution
Bass response is low.
Check volume control on the radio.
Check GAIN regulator on the amplifier.
Check RCA cables and connections.
Check speaker cables and connections.
•
Problem
Solution
The amplifier switches on and off.
Check chassis ground connection with amplifier cable and check battery terminal
connections and check remote turn-on voltage.
For additional questions please contact your authorized Audiopipe dealer.
- 5 -
English

Audiopipe warrants this amplifier for one year from date of purchase against all manufacturing
defects only.
Warranty does not include physical damage or electrical abuse from being over-driven
or short circuit from speaker failure.
Amplifier must be installed by an authorized Audiopipe dealer or there is no warranty.
Amplifier must be returned to Audiopipe freight pre-paid, Audiopipe will pay return freight
to authorized dealer.
RMS @ 4 Ohms (<1% DISTORTION) .....................................
RMS @ 2 Ohms (<1% DISTORTION) .....................................
Maximun Power Output ...........................................................
Frequency Response ...............................................................
Signal Noise Ratio ...................................................................
THD .........................................................................................
Input Sensitivity Level ..............................................................
Stereo Separation ..................................................................
Crossover (FLAT) .....................................................................
Crossover (LOW) ....................................................................
Dimension (W x H x D) ............................................................
4 x 75+500W
4 x 120+350W
2 x 250+500W
20Hz ~ 30kHz
>80dB
<0.05%
0.2 ~ 5V
>65dB
50 ~ 1.2kHz
50 ~ 250Hz
301.5 x 154 x 49.1mm
APSM-55100
- 6 -
English