Audiovox electronics Shuttle sir-pnp3 User manual

128-7193A

1 of 32

Shuttle User Guide SIR-PNP3

JUMP

s.seek

.tune

Category A-112:00P

Artist

Song

001 ChannelNam e

Released: 8-6-04

Revision A: 8-10-04 Removed maximum FM frequency reference; default display mode PDT to 2 lines

and font type to A.

128-7193A

2 of 32

Congratulations

You are one step closer to experiencing the latest innovation in Sirius Satellite Radio. Sirius will

revolutionize your in-home or vehicle entertainment with:

•Over 120 channels of original programming, including –

65 channels of 100% commercial-free music – guaranteed,

Over 50 channels of world-class sports, news, talk and information.

Your Audiovox Shuttle receiver must be used with an adapter kit, such as the Audiovox Home kit,

Boom Box or Vehicle Kit as required by your specific installation needs. These kits are available at

retailers where Audiovox main units are sold.

AudiovoxHomeKit: Part Number SIR-HK3

AudiovoxVehicleKit: Part Number SIR-CK3

AudiovoxBoomBox: Part Number SIR-BB3

-2-

128-7193A

3 of 32

-3-

Contents

Cautions and Warnings ...................................... 4

Shuttle System Components .............................. 4

Introduction .......................................................... 5

Enjoying Your Sirius Shuttle ................................ 5

Sirius Shuttle Controls......................................... 6

Basic Operation ................................................... 8

Tuning by Category .......................................... 8

Content Listing Options (Look Ahead) ............ 8

Direct Tuning ......................................................9

Setting/Using Channel Preset Buttons .............9

Preset List Mode ..............................................10

Display Button .................................................. 10

Memory Button (S-Seek Function) ................... 11

Menu Display Options ......................................... 14

Sirius ID ............................................................ 14

Jump Settings .................................................. 14

Display Settings ............................................... 18

FM Transmitter Options ................................... 19

Add or Skip ....................................................... 20

Lock Options .................................................... 20

Lock/Unlock Default Code Function ................ 20

Edit Code.......................................................... 21

Audio Level Options ......................................... 21

Antenna Aiming (Home Installation)................ 21

Memory Options ............................................... 22

Time Based Features ...................................... 22

Clock................................................................. 22

Format........................................................... 22

Time Zone..................................................... 23

Alarm Clock .................................................. 23

Alarm Time ................................................... 24

Program Alert ................................................... 24

Time/Day....................................................... 24

Channel ........................................................ 25

Program Alert On/Off..................................... 25

Auto Shutdown ................................................. 25

Sleep Mode ...................................................... 25

Factory Default ..................................................... 26

Remote Control Unit ............................................ 26

Troubleshooting .................................................. 28

Specifications ...................................................... 28

APPENDIXA ......................................................... 29

Warranty ............................................................... 31

128-7193A

4 of 32

Cautions and Warnings

1. Do not install the Shuttle in a position that hinders

your view through the windshield, or obstructs view-

ing of the dashboard indicators and displays.

2. Do not install the unit where it may obstruct the

operation or deployment of safety devices, such

as airbags, etc.

3. Do not allow operation of the unit to detract from

safe driving practices; remember that you are

responsible as the vehicle operator to adhere to

all safe driving and traffic regulations.

4. This device complies with Part 15 of the FCC Rules.

Operation is subject to the condition that this device

does not cause harmful interference.

5. By adhering to these warnings and safety consider-

ations, serious accidents and/or personal injury can

be avoided.

Introduction

The Audiovox SIRIUS® Shuttle processes the satellite

signals received by the externally mounted antenna

(purchased separately as part of the Home, Vehicle or

Boom Box Kits). The Shuttle recognizes and decodes

the incoming SIRIUS® program information and

provides an audio signal to your radio or other audio

output equipment. -4-

Shuttle System Components

Shuttle Unit

Model PNP3,

P/N144-2453

Remote Control Unit

P/N136-3803

Batteries for

Remote, (2) “AAA”,

P/N156-2215

JUMP

s.seek p.tune

Category A-112:00P

Artist

Song

001 ChannelNam e

128-7193A

5 of 32

NOTE: The SIRIUS® signal can be received and

processed virtually anywhere as long as there

are no obvious satellite signal obstructions

such as nearby buildings, high terrain,

parking garages or tunnels.

The Shuttle is typically installed in an

accessible location of the vehicle (dash area),

consistent with line-of-sight operation of the

remote control, and/or within easy reach of the

driver. For home use, situate the Shuttle

close to your stereo receiving equipment.

Enjoying Your SIRIUS®

Shuttle

You can begin to enjoy Sirius®Satellite Radio as soon

as the Shuttle and Kit installation are complete:

1.Set up your Audiovox Shuttle using the installation

instructions included in your Home Kit, Vehicle

Kit or Boom Box Kit, or with the help of a profes

sional installer.

NOTE: Refer to Antenna Aiming (page 21) during

the installation procedure.

2. When power is available to the unit, note that the

integral Power button LED icon lights red. Then

press the Power button to turn on the Shuttle.

3. The Sirius logo ( ) appears on the display

followed by the Sirius preview channel. If this is the

first time using the Shuttle, the screen will display

“Updating Channels”. If not, go to channel 184 us-

ing the direct channel method, page 9, Direct Tun-

ing.

4.To obtain the Sirius identification (ID) number,

press the MENU button. The Menu Options page

appears with the Sirius ID option highlighted. Press

the Encoder knob and the 12 digit Sirius ID number

will appear. Write the number here for future refer-

ence.

5.Activate your Sirius®radio service ---- it’s easy. You

have one of two choices to activate your service:

(a) Visit the website at sirius.com and click on

the “JOIN” section. You will then need to follow

some simple directions and provide Sirius with

some basic information in order to activate your

service.

-5-

128-7193A

6 of 32

(b) Call Sirius at 1-888-539-SIRIUS (7474). One of

our friendly Customer Care representatives will

takethe necessary information and walk you

through the activation process.

Sirius® Shuttle Controls

The Audiovox Sirius®Shuttle Unit provides eight control

buttons, an Encoder knob and 10 number keys.

Power Button:

This button applies power to and removes power from

the Sirius®Shuttle as follows:

1. A momentary press of the power button turns on

the receiver, and is accompanied by a confirmation

beep tone. The Sirius logo/name ( ) initially

appears on the LCD display for 3 seconds, followed

by the Default screen (if turned on for the first time),

or by the tuning mode in effect when the unit was

last powered off.

2. A momentary press of the power buttonturns off

the receiver. While the unit powers down, the

Audiovox logo appears for 2 seconds and the

unit turns off.

-6-

Category A-112:00P

Artist

Song

001 ChannelName AUTOSIZING/

SCROLLING

ARTIST NAME

BAND/PRESET

BANKNUMBER

CLOCK

8-CHARACTER

Category

128-7193A

10 of 32

-10-

NOTE: The field will scroll only if the length of the art-

ist or title cannot be viewed in its entirety.

Pressing and holding the Display button will

enter the channel list mode. While in the

Channel List mode, any subsequent press of

Preset List Mode

To search by list for a preset, press and hold the BAND

button to enter Preset Tune mode. When in the Preset

Tune Mode, press and hold the DISP button for 2 sec-

onds; this exits normal preset tuning and enters a 6-line

menu mode which displays the Preset number (A-1), a

single space and the 20-character channel name. While

in the Preset List menu, pressing the DISP button once

will change to Artist List; a second press of the DISP

button changes to Song List.

While the contents of the preset listing are displayed,

rotate the Encoder knob to navigate through the list.

When the desired selection is highlighted, press the

Select Button and the channel will be played.

Display Button

Pressing the Display button from the Default display

toggles between the artist name/song title screen or

large letter format. When the letter size changes, the

field will scroll. This feature is useful when viewing the

display at a distance.

A-5 ChannelNam e

A-4 ChannelNam e

A-2 ChannelNam e

A-1 ChannelNam e

A-3 ChannelNam e

A-5 Artist Nam e

A-4 Artist Nam e

A-2 Artist Nam e

A-1 Artist Nam e

A-3 Artist Nam e

A-5 Song Title

A-4 Song Title

A-2 Song Title

A-1 Song Title

A-3 Song Title

005 ChannelNam e

004 ChannelNam e

002 ChannelNam e

001 ChannelNam e

003 ChannelNam e

Category A-112:00P

Artist

Song

001 C hannel N am e

Preset

Tune Mode

Category A-112:00P

Artist

Song

001 ChannelNam e

Category 12:00P

Artist

Song

ChannelName

A-1

001

Press and

Hold Preset

Button

Press and

Hold Preset

Button

128-7193A

11 of 32

-11-

Memory Button (S-Seek Function):

This feature allows the user to capture and store the

current program data information (Artist & Song title)

with up to 24 listings (24 Artist/Song Title combinations).

The unit also has the capability to search the current

incoming Sirius signal and alert the user when a saved

song is being played.

1. While the Shuttle is in either of the two standard

display modes, momentarily pressing and releas-

ing the MEMO button stores the current program

data information within the Shuttle’s memory. A

Memory Storedpop-upscreen,followedby “XUsed/

Y Empty” will each appear for 1 second.

2. By holding down the MEMO button for 3 seconds, the

storedmemory information (one ata time) is displayed

on the LCD screen in page format. Use the Encoder

knob to scroll through the 24-page listing and view the

information. This function allows you to recall informa-

tion regarding the Artist/Song Title for your own personal

review. To return to the default tuning mode press and

hold the MEMO button for 3 seconds.

the DISP button will display program informa-

tion by Artist Name, Song Title or channel name.

Pressing and holding the DISP button will exit

the Channel List mode and return to the previ-

ously selected tuning/display mode.

3.Momentarily pressing the Encoder knob while in

memory recall mode results in a pop-up screen dis-

playing two selectable options:

Delete

S-Seek

005 ArtistName

004 ArtistName

002 ArtistName

001 ArtistName

003 ArtistName

005 Song Title

004 Song Title

002 Song Title

001 Song Title

003 Song Title

Category A-112:00P

Artist

Song

001 ChannelNam e

Stored

Category A-112:00P

Artist

Song

001 ChannelName

X Used / Y Em pty

Push SEL to configure

Artist

Song

Memory S

128-7193A

12 of 32

Turning the Encoder knob highlights the options

and pushing the knob selects the option. The

delete option allows the user to delete the

currently featured artist/ song title selection from

S-Seek memory. The default setting is NO. If the

YES option is chosen, the currently featured Artist/

Song Title is deleted from S-Seek memory. The S-

Seek option allows the user to turn the S-Seek

function on or off. The default setting is S-Seek on.

If the off option is chosen, the user will not be

alerted when a stored artist song title selection is

currentlyplaying. Momentarily pressing the MEMO

button will exit the current menu and return to the

previous menu.

-12-

4. When the S-seek function is on each time the

Shuttle is turned on, it automatically searches

the incoming signal to determine if a match exists

between the signal and the currently saved infor-

mation stored in receiver memory. If one or more

matches are found, pop-up screen momentarily

appears for 2 seconds and displays the Phrase

S-Seek Alert. An audible beep tone will be heard

indicating that a match has been found. The display

then reverts to the S-Seek Alert screen which dis-

plays the current matches. You can now select the

Artist/Song that you wish to listen to.

MemoryR ecall

S-Seek

Delete

Yes

S-Seek

OFF

Category A-112:00P

Artist

Song

001 ChannelNam e

S-Seek Alert

S-Seek Alerts

ArtistNam e/Song

128-7193A

13 of 32

-13-

b.If a selection is not chosen within 10 seconds

after the last action, the screen will revert to the

previously selected display and tuning mode.

NOTE: Play of the current selection will con-

tinue until a new selection is made.

5. If the MEMO button is pressed to save a currently-

playing selection, and all of the memory spaces

are full, S-Seek Full will flash on the display for 1

second, followed by a pop-up screen presenting

the Replace-Cancel options. This prompt allows

you to make the following Replace/Cancel choices:

a.By selecting Replace, the memory list will

appear, and you can use the Encoder knob to

select the information that you would like to

overwrite with the new Artist/Song Title. After

highlighting the selected title in the list, press

the Encoder knob to delete the stored Artist/

Song Title,and replace it with the updated

information.

b.By selecting Cancel, the prompt screen would

disappear and revert to the original screen.

No stored match alert is provided for the currently

selected channel. To ensure that no duplicate en-

tries are stored in memory, the receiver will check

the stored input data to ensure the information about

to be stored is not already in memory.

a.If one or more matches are found, a display list

appears, and allows you to scroll through the

list of songs using the Encoder knob.

Once a song is found, it can be selected by press

ing the Encoder knob, and the display will revert

to either of the selected display modes.

Category A-112:00P

Artist

Song

001 ChannelNam e

S-Seek Full

Category A-112:00P

Artist

Song

001 ChannelName

Cancel

Replace

128-7193A

14 of 32

If, while in the menu screen function, a button is not

pressed within 10 seconds from the previously selected

function, the unit exits the menu screen function and

reverts to the default screen display.

MenuDescriptions

Sirius ID Audio Level Options

Jump Settings Antenna Aiming

Display Settings Memory Options

FM Transmitter Options Time Based Features

Add or Skip Factory Default

Lock Options

-14-

Sirius ID

Jump Settings

Once the user presses the Encoder knob to enter the

“Jump Settings” screen, a display appears for 2

seconds to provide directions for the user’s selec-

tion. This pop-up screen is followed by a display of-

fering2optionsfortheuser:Traffic:XXXandJumpSet,

where XXX is the 3-letter abbreviation of a city where

traffic/weather reports are available.

Sirius ID

Displays your 12 digit Sirius ID number. No

adjustments are allowed in this mode. To exit this

option, press the Encoder knob or Menu Button.

NOTE: The Jump button can be programmed to

select either of the jump setting options,

but not both.

2 sec.

Menu Display Operations

To enter the Menu Options page, press the MENU But-

ton. The Menu Options list will appear on the LCD dis-

play. Using the Encoder knob, highlight the option you

wish to adjust and then press the Encoder knob.

The following options are available:

128-7193A

15 of 32

-15-

Traffic Option

When the Traffic option is highlighted on the

“Choose Jump Setting” screen, the 3-letter

abbreviation of the currently selected city is also

shown; however, if no city has been selected,

NONE appears. To select a desired city, press

the Encoder knob when the Traffic option is high-

lighted, and the “Choose Traffic Market” screen

appears with a listing of abbreviated city names

in alphabetical order.

Rotating the encoder knob or pressing the

CH+/CH- button on the remote scrolls through

thecity list, highlighting each city for selection.

When the desired city is highlighted, press the

Encoder knob to confirm selection. The city ID is

then saved for the Jump feature.

If the action is canceled without making a selec-

tion (by pressing MENU to return to main

menu), no city ID is saved. However, if a city is

selected, itcannot be deselected (i.e; return to

NONE status); however, the city can be replaced

with another city.

A city selection may not be available at a given

time. In this case, a pop-up screen is displayed

for 2 seconds indicating the city list is being up

dated, and the display then returns to the previ-

ous menu option.

NOTE: Current city abbreviations are presented in

APPENDIX A of this manual onPage 29.

Jumpset Option

When the “JumpSet” option is highlighted on the

“Choose Jump Setting” screen, and the Encoder

knob ispressed to select this option, the Jump but

ton cannow be used as a JumpSet function. The

128-7193A

16 of 32

display appears for 2 seconds, as shown previ-

ously, providing directions to set the JumpSet chan-

nel, before returning to the “Choose Jump Setting”

screen.

Once the Jump button is set to function as JumpSet,

the Traffic line displays “NONE” to signify that the

button can no longer be set to traffic alert.

InitialActivation

When the Jump Button is pressed for the very first

time, a pop-up shall appear indicating “Set Jump

Button” for 2 seconds, before taking the user to

the following “Jump Setting” screen of Menu

-16-

2 sec.

Options. Then follow the previous steps describ-

ing city selection.

Tuning and Alert

While listening to any Sirius programming, a

press and release of the Jump button, or a press

and hold of the Jump Button activates the Jump

function. If this is the first time the Jump button is

activated, refer to Initial Activation. Otherwise, the

receiver will recognize whether the Jump button has

been set to city traffic report or simply as a JumpSet

button. The tuning and alert mechanism only works

in the normal operation mode, and not in Channel

List Mode, Category List Mode, Preset Tuning

Mode or Menu Option Mode.

Traffic/City Market

If the receiver determines that the Jump button is

set to Traffic (City Market), it

then detects whether a City

ID has been set. If the City

ID is not present (not set

inadvertently), the adjacent

screen appears indicating the Button was not set.

2 sec.

128-7193A

17 of 32

If a city ID has been set, the receiver will

immediately start scanning all channels for a

matching City ID. While searching for the city ID, a

pop-up appears for 2 seconds, with “XXX Pending”,

where XXX is the 3-letter abbreviation of the city

name, specifying that the receiver is indeed search

ing and waiting for the desired traffic/weather re-

port. The band indicator (preset bank) on the dis

play changes to the Jump button icon to signify that

the receiver is in searching mode.

The receiver continues searching until a match is

found or any list mode (Channel list, category list,

Preset Tune Mode or Menu Option) is entered prior

to a found match. When it exits any of the list modes

and returns to the normal operation mode, the city

ID search resumes until a match is found. If the

selected city’s traffic/weather information is being

broadcast on a different channel, then the receiver

tunes to that channel immediately. If the city of

choice is the current channel, the receiver tunes to

the previous channel. The audio remains on the

current channel until the receiver is tuned to the fa-

vorite channel. If no previous channel is available;

e.g., first channel tuned to after a power cycle, an

audible beep occurs and the receiver remains tuned

to the current channel.

Jumpset

JumpSet is when the Jump button is chosen to act

as an enhanced Preset button. Setting of the

JumpSet is the same as any other Preset: While

listening to any Sirius channels, a press and hold

-17-

2 sec.

Jump Icon

128-7193A

18 of 32

Display Settings

The following adjustments are possible:

Contrast Control

DimmingControl

FontType

To enter any of these modes, use the Encoder

knob to highlight the option you wish to adjust and

press the Encoder knob. Upon entering either the

contrast or dimming control, a 10 segment horizon

tal bar graph is displayed with a “-” sign to the left

and a “+” sign to the right. The current setting is

indicated on the bar graph. Rotating the Encoder

knob adjusts the bar graph indication and function

accordingly.

of the Jump button saves the current channel as

the JumpSet channel. When a channel is saved

as a JumpSet, the band indicator will change to

to indicate that the current channel is associ-

ated with the Jump button.

If the receiver determines that the Jump button

Setting is a JumpSet, before a JumpSet channel

is chosen, pressing and releasing the Jump

button yields a pop-up screen indicating “Button

Not Set”.

If the channel is set, pressing and releasing the

Jumpbutton tunes the receiverto the JumpSet chan-

nel immediately. If that channel is the current chan-

nel, the receiver tunes to the previous channel. If no

previous channel is available, e.g. first channel

tuned to after a power cycle, there will be an au-

dible beep and the receiver remains tuned to the

current channel.

Replace

The traffic city ID can only be replaced by changing it

inthe Menu Option - Jump Setting - Choose Traffic

Market. The JumpSet channel can be replaced by

programming another channel as the JumpSet

channel.

-18-

128-7193A

19 of 32

Dimming control offers two choices; Manual and Au-

tomatic. In both cases, a 10-segment horizontal bar

graph is displayed with a “-” sign to the left, and a “+”

sign to the right. The current setting is indicated on

the bar graph by a reverse image segment.

The Font Typeallows the user to select the appear-

ance of text on the Shuttle display.

FM Transmitter Options

The following adjustments are possible:

FMOn/Off

Frequency Selection

FrequencySetting:

Upon entering this mode, any FM transmitter

frequency can be chosen using the Category

Up/Down buttons for coarse (1.0MHz steps)

frequency selection, and the encoder knob for fine

(200kHz steps) frequency selection.

FMOn/Off:

Upon entering this mode, rotating the Rotary

Encoder knob to toggle between the FM ON

or FM OFF function/display selection. To select

and/or exit this function, press the Encoder

knob. (No button activity for 10 seconds will

also exit this function.)

-19-

NOTE: It is recommended that you turn the FM

Transmitter off if you are using the low level

audio outputs in your particular application.

For example, to increment and decrement a fre-

quency of 1.0MHz within the minimum

(88.1MHz) and maximum FM frequency range,

press the Category Up/Down button as

necessary to enter the desired range (e.g.,

89.1MHz to 90.1MHz); then use the encoder

knob to choose the desired frequency within

that range in 200kHz steps.

Press the select button to enter the new frequency

setting, or press the MENU button to return to the

menu options page with no change to frequency.

FM Transmitter Option

Frequency Selection

ON/OFF

OFF

128-7193A

20 of 32

-20-

Once a channel has been highlighted, pressing the En-

coder knob displays the text “Lock” next to the channel

and prevents the channel from being accessible during

any of the tuning modes. Locked channels can be ac-

cessed only by direct channel number entry, at which

time the user will be prompted to enter the previously

stored 4-digit code. Once the correct code has been

entered, the audio begins to play. The channel returns to

the locked status if the channel is changed or the ve-

hicle/unit is turned off (or by returning to this menu and

going through the same process to return the channel

to the list). Upon adding a channel, the text “Lock” is

removed from alongside the channel number/name.

Lock/UnlockDefaultCodeFunction

The first time the Lock/Unlock function is accessed,

the user must enter the default lock code. The default

lock code is “0000”. This code can be maintained or

changed. To change the default lock code perform the

following procedure:

Add or Skip

Upon entering this mode, a channel list is displayed with the

current channel in play highlighted. Rotate the Encoder knob

to navigate the list and highlight the channel to be adjusted.

Once a channel has been highlighted, pressing the Select

Button displays the text “Skip” next to the channel, and pre-

vents the channel from being accessible during any of the

tuning modes. Skipped streams can only be accessed either

through direct channel number entry or by returning to this

menu and going through the same process to return the

skipped channel to the list. Upon adding a channel, the text

“Skip” is removed from alongside the channel number/ name.

Lock Options

Upon entering this mode for the first time, the user is

prompted to enter a four digit numerical code that is

used to lock/unlock channel access. All future entries

into this mode displays a channel list with the current

channel in play highlighted. The Encoder knob is used

to navigate the list and highlight the channel to be ad-

justed.

Table of contents

Other Audiovox Electronics Receiver manuals

Audiovox Electronics

Audiovox Electronics ACA300R User manual

Popular Receiver manuals by other brands

RadioMaster

RadioMaster R161 user manual

Yamaha

Yamaha R-V1103 owner's manual

Grundig

Grundig DTR 1760 MICRO user manual

Motorola

Motorola DCT5100 user guide

Nolan

Nolan NSRX3C25XX user guide

evertz

evertz 7700 Series manual

Harris

Harris RF-590 instruction manual

RTI

RTI VHR-1x reference guide

Pioneer

Pioneer AVH-290BT owner's manual

Veris

Veris Multimedia Station Basic installation guide

Japan Radio Co.

Japan Radio Co. JUE-60GX instruction manual

Yamaha

Yamaha RX-V671 owner's manual

Pentair

Pentair INTELLICOMM II installation guide

Sangean

Sangean DT-210 brochure

Kindermann

Kindermann Advanced operating instructions

HomeSpot

HomeSpot BTADP-236-LL manual

Malamis

Malamis RX-Multi manual

Sherwood

Sherwood RD-7502 Service manual

Audiovox Electronics Shuttle SIR-PNP3 User manual

Popular Receiver manuals by other brands