Audiovox VOH10FR User manual

ON AUTOOFF
OPERATION
MANUAL
128-8826
VOH10FR
10.2" OVERHEAD LCD
MONITOR

Important Notice
Installation of overhead products requires careful planning and preparation. Be extremely careful when working on a vehicle with side
curtain air bags. Do not route wires near any portion of the side curtain air bag assemblies. This includes any anchor points in A, B, C or
D pillars of the vehicle. Routing wires in these areas or running wires by the side curtain air bags can prevent the side curtain air bag from
fully deploying which can result in personal injury to vehicle occupants. If you have any questions regarding wire routing in a vehicle,
please contact Audiovox Technical Support at 1-800-225-6074.
When connecting power and ground in a mobile video installation ensure that the ACC wire is fused at the point where it is connected to
the vehicle ACC wiring. Failure to do so can result in damage to the vehicle if a short circuit develops between the vehicle connection
point and the mobile video product.
An LCD panel and/or video monitor may be installed in a motor vehicle and visible to the driver if the LCD panel or video monitor is used
for vehicle information, system control, rear or side observation or navigation. If the LCD panel or video monitor is used for television
reception, video or DVD play, the LCD panel or video monitor must be installed so that these features will only function when the vehicle is
in “park” or when the vehicle's parking brake is applied.
An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the
parking brake is not applied must be installed to the rear of the driver's seat where it will not be visible, directly or indirectly, to the operator
of the motor vehicle.
Warnings
•Do not use any solvents or cleaning materials when cleaning the video monitor.
•Do not use any abrasive cleaners, they may scratch the screen.
•Use only a lightly dampened lint free cloth to wipe the screen if it is dirty.
•Lock the LCD screen in the fully closed position when not in use.
•Before putting on headphones always adjust the volume setting to the lowest position.
•Remember to leave the dome light switch in the off or auto positions when the vehicle is unattended, as the dome lights, if left on, can drain
the vehicle's battery.
•Do not put pressure on the screen.
•Caution children to avoid touching or scratching the screen, as it may become dirty or damaged.
Licensed under one or more of the following patents,
Patent NOS. 5,775,762 , 5,927,784 and 6,678,892
I

II
FEATURES
Congratulations
Congratulations on your purchase of the AUDIOVOX
VOH10FR DVD Player with Drop-Down Video / Monitor. The
VOH10FR has been designed to give you and your family
many years of video entertainment in the mobile environment.
Please read the directions that follow to familiarize yourself
with the product to ensure that you obtain the best results
from your equipment.
Please note: Installation options vary, see the individual
owner's manuals for each component in your system to
obtain a full understanding of each component's operation.
Safety Precaution
For safety reasons, when changing video media it is
recommended that the vehicle is not in motion, and that you
do not allow children to unfasten seat-belts to change video
media or make any adjustments to the system. System
adjustments can be accomplished using the remote control,
while seat-belts remain fastened. Enjoy your AUDIOVOX
entertainment system but remember the safety of all
passengers remains the number one priority.
• 10.2” TFT (Thin Film Transistor) Active Matrix LCD
(Liquid Crystal Display) Monitor.
• OSD (On Screen Display) for Control of Picture
Quality and Functions.
•
• Five Audio/Video Source Inputs (FLO TV, USB,
CMPT, AV and AUX).
• Dome Lights with Built-in Three Way Switch.
• Built-in 16 Channel Wireless FM Modulator.
•
•
•
• 1
• FLO TV Ready.
Single Channel Infrared Transmitter for IR Wireless
Headphones.
AV Output via RCA Pigtail.
Screen Mode Selection (4:3, 16:9).
Full Function Remote Control.
Backlit Controls.

ON AUTOOFF
1
2
3
4
5
6
7
8
9
10
11
12
13
1
CONTROLS AND INDICATORS DIAGRAM (FRONT VIEW)
1. FLO TV Control
This control is direct local key The
mode LED will change from white to purple when the FLO TV
is connected.
2. Infrared Transmitter and Sensor
Transmits audio to wireless headphones, allows the remote
control to operate the VOH10FR and to control other
accessories in the system.
3. Dome Lights
Provide additional interior illumination.
4. POWER ( ) Control
Used to turn the system on/off.
5. Source Select
Use to select one of the five sources: FLO TV, USB, CMPT, AV
andAUX.
6. PLAY (u) / PAUSE Button (II) / BACK ( )Control
a.) PLAY (u)
This control is used to start playback of a multimedia file.
b.) PAUSE Button (II)
Press to pause playback. Pressing the PAUSE button
again or pressing the PLAY Button will resume normal
playback.
c.) BACK Button ( )
Press and hold the button when user back one screen.
to function with FLO TV.

1 2 3 4
CONTROL FUNCTION DESCRIPTION
(SIDE VIEW)
1. USB INPUT FOR USB MEMORY DEVICE
Allows for the connection of an USB or memory device..
2. Auxiliary Video Input
3. Auxiliary Audio Left Input
4. Auxiliary Audio Right Input
2
7. CURSOR uControl
a.)
• Press and hold the (P) button to
• Use these buttons for channel changing (up), navigating
menus and selecting items in FLO TV mode.
b.) CURSOR (u) Control
This button is only active for USB mode. Selecting your
favorite by cursor (u) and press “OK” button on your remote
control or press ( ) button on unit. Information slide show
will begin while playing your favorite file.
8. CURSOR qControl
a.)
• Press and hold the (P) button to
• Use these buttons for channel changing (down),
navigating menus and selecting items in FLO TV mode.
b.) CURSOR (q) Control
This button is only active for USB mode. Selecting your
favorite by cursor (q) and press “OK” button on your remote
control or press ( ) button on unit. Information slide show
will begin while playing your favorite file.
9.
Press and hold the (P) button until monitor d
For USB mode, used to implement a selected setting.
( + ) Button / ( )
( + ) Button
adjust the control by +
(increase).
( – ) Button / ( )
( – ) Button
adjust the control by –
(decrease).
Button /
isplay picture
adjustment mode for (BRIGHTNESS, CONTRAST, COLOR,
TINT & RESET)
( P ) ( ) ENTER Control
a.) ( P )
b.) ( ) ENTER Control
PICTURE
PICTURE Button
10. Three Position Dome Light Switch
ON - Turns on the dome lights.
OFF - The dome lights will not turn on in this position.
AUTO - Automatically switches on the dome lights in
Conjunction with the vehicle's interior illumination.
11.
12. LCD Cut Off Switch
Used to turn off the LCD monitor when in the closed position.
13. LCD Panel
Screen Release
Moves in direction of the arrow to release the drop down
screen.

ACCESSORIES
WIRELESS HEADPHONES
The VOH10FR includes a built-in infrared transmitter for use with the supplied wireless headphones. The headphone volume is adjusted
using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the
transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your wireless
headphones.
SOURCE FEATURE
FLO TV
The VOH10FR is designed to function with FLO TV. This function control is available when the overhead unit is used with an
optional plug in FLO TV Harness and FLO TV Module.Once the FLO TV Harness and FLO TV Module are connected press the
source button until the screen displays FLO TV. For specific instructions refer to Appendix A ,FLO TV.
USB
USB Port is built-in on the right side of the unit. Version 2.0 and supported multimedia. Also charging iPOD when it is selected to AUX
mode.
CMPT
CMPT (Y Pb Pr) Input, Supported 480i/P, 576i/P and 720P.
AV
The AV input may be connected to a external video source, video game system, or other audio / video devices. To access the
audio/video inputs, turn the unit on and press the S (source) button on the VOH10FR or the Source button on the remote control
until "AV" is displayed on the screen. Turn the video source component on with its power button or remote control and it is now
ready to play the audio and video signals from the source connected .
Note: AV sources are available only if pre-installed during your video product installation.
3

AUX
The AUX input may be connected to an external video source, video game system, or other audio/video devices. To access the audio / video
inputs, turn the unit on and press the S (source) button on the VOH10FR or the Source button on the remote control until "AUX" is displayed on
the screen.
IPOD Playback & Charging
For iPOD playback & charging the unit must selected to AUX source and user can play the iPOD thru the AUX input and at the same time charge
the iPOD thru the USB. But must use originalApple CompositeAV Cable.
4

Battery Installation
Before attempting to operate your Remote Control, install the
batteries as described below.
1) Turn the Remote Control face down. Using your finger, slide
the battery cover off in the direction of the arrow.
2) Install Two “AAA” batteries. Make sure that proper polarity
(+ or -) is observed.
3) Align the cover tabs with the remote control and slide the
cover until it locks.
The remote control will operate the VOH10FR It is not a universal
remote control and will not control equipment from other
manufacturers.
5
MAIN FUNCTION OPERATION
REMOTE CONTROL OPERATION
POWER
SOURCE
VOLUME
FMM
ON/OFF
FMM
SELECT
IRT
ON/OFF
DISPLAY RETURN MUTE PIX
MONITOR SELECT
M1
12
5
8
4
7
0
3
6
9
FLO
M2
DVD
OK
MENU
REPEAT
SETUP
ZOOMAUDIO
SUBTITLE A-B
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
36
EJECT
DVD
SOURCE
SYSTEM
MENU
MODE
35

6
*Function control is available on the unit and the Remote Control.
** Function not available in this model.
*** FLO TV function only available when optional FLO TV module is installed.
Note: Refer to Appendix A FLO TV for FLO TV operating instructions..
1. POWER Button*
Press this button to turn the unit ON and OFF.
2. MONITOR SELECT Button
M1 Button – Sets the remote control code to allow control of the unit set to M1 mode.
M2 Button** – Sets the remote control code to allow control of the unit set to M2 mode.
3. FLO TV Button***
4. DVD Mode Select Button
Press this button when playing . Switches certain function keys on the remote control for functions.
5. SOURCE Button*
Each time the button is pressed, the unit will select various sources in the following sequence:(FLO TV, USB, CMPT, AV and AUX).
6. FMM ON/OFF Button
Turns the FM Modulator on/off.
7. FMM SELECT Button*
Select the wireless FM Modulator Frequency:
(CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5 88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9
89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12 90.3MHz, CH13 90.5MHz, CH14 90.7MHz, CH15 90.9MHz, CH16 91.1MHz).
Press this button to access the FLO TV mode. Also switches the function keys on the remote control to correspond to FLO TV functions.
multimedia file multimedia file

7
8. IRT ON/OFF Button
Turns the Infrared Transmitter ON or OFF for IR Wireless Headphones.
9. DISPLAY Button
Press to display the current multimedia file information while the is playing.
10. RETURN Button
Press for return to previous page/ previous menu.
11. SYSTEM MENU Button
Allow the user to access the system menu. Press cursor (pq) buttons to select desired PICTURE, FMM , OSD LANGUAGE, SOURCE
DEFAULT FLO and SCREEN MODE during power up.
12. BACK Button ***
When in FLO TV mode takes the user back one screen when in the Menu, Show Information, Show Description, or Guide. Path ends at full
screen TV.
13. CURSOR Button (pqtu) ***
Use these buttons to access menu selections on the screen in DVD mode. Use these buttons for channel changing (up/down),
navigating menus and selecting items in FLO TV mode.
14. OK Button (ENTER)*
Used to implement a selected setting or menu option.
multimedia file
**

8
15. MENU / SETTINGS Button
a.) MENU Button
Pressing the MENU button to display the HOME Page Menu.
Note: Pressing the FLO TV button will access the FLO TV mode and disable the USB functions.
b.) SETTINGS Button ( ) ***
When in FLO TV mode the Settings button allows user to toggle the FLO TV settings menu on/off.
16. REPEAT Button
Allows the user to repeat a selected repeat one / repeat all.
17. AUDIO Button
Press to display and selectAudio changing audio to L/R/ Stereo.
18. SUBTITLE Button
Press to display and select the subtitle language in movie mode. Each time you press the button, the subtitle language changes.
Note: The type and number of languages for subtitle vary from disc to disc.
19. STOP Button (<)*
Press the STOP button once to stop playback. (Playback will resume from the point it is stopped).
Press the STOP button twice to stop playback. (Playback will resume from the beginning of the disc).
20. PREVIOUS Button (9)
Press to return to the previous file or previous page.
21. SCAN BACKWARD Button (7)
Press to search in a backward direction. Press repeatedly to change the search speed from x2, x3, x4 times the normal speed.

22. PAUSE Button (II)
Press to pause playback. Pressing the PAUSE button again or pressing the PLAY Button will resume normal playback.
23. PLAY Button*
Press to activate the play mode while a is loaded in the compartment.
24. SCAN FORWARD Button (8)
Press to search in a forward direction. Press repeatedly to change the search Speed from x2, x3, x4 times the normal speed.
25. NEXT Button (:)
Press to skip to the next file or next page.
26. A-B Button
Allow user to repeat disc playback from point A to point B.
Press A-B button On-Screen Display DVD Player
Once Repeat A- Mark the beginning of the section to repeat (Set point A)
Twice Repeat A-B Mark the end of the section to repeat (Set point B)
3 Times AB Off Cancel the A-B repeat function
27. ZOOM Button
Press this button to enlarge the picture when playing a movie.
Press ZOOM button DVD player perform
Once Enlarge the picture 2 times of the original size
Twice Enlarge the picture 4 times of the original size
3 times Enlarge the picture 8 times of the original size
4 times Picture is returned to original size
multimedia file multimedia file
**
9

28. MODE / SETUP Button
a.) MODE Button
When in FLO TV mode pressing the MODE button toggles between FLO TV and an auxiliary A/V source attached to the FLO TV
module. (NOTE: your system may not have an auxiliary source).
b.) SETUP Button
When in DVD mode pressing the SETUP button will display the SETTINGS which allows the user to change the options such as Language,
Slideshow duration, Slideshow mode, Music repeat mode, Movie repeat mode, Autorun & Default. Refer to the settings and adjustment
section for more information.
29. INFORMATION Button ( ) ***
Pressing this button displays the Channel Info bar and the Program Description. When in FLO TV mode pressing the button opens the
Channel Info bar. The second button press while Channel Info bar is displayed will provide program information. To return to the FLO
TV program press the button again.
30. CHANNEL GUIDE Button ( )***
When in FLO TV mode pressing this button allows the user to turn the Channel Guide on and off. The Channel Guide opens with the
current channel and show title highlighted.
31. MUTE Button
Press this button to mute the audio for wireless FMM and IR headphones.
Pressing the button again restores the sound to the previously set level.
32. PIX Button (Picture Select)Button
Each time this button is pressed, the on screen picture adjustment displays the “adjustment bar” for BRIGHTNESS, CONTRAST, COLOR,
TINT or RESET. Once the desired adjustment bar is displayed, use the VOLUME (+) / VOLUME (-) button to adjust the setting. The display will
automatically turn off if no adjustments are made within 6 seconds.
33. VOLUME DOWN (-) or UP (+) Button
Press to decrease or increase the volume of the wired headphones. Press to decrease or increase the level of the picture settings.
The settings are available after the picture select button is pressed.
**
10

34. NUMBER Buttons**
When DVD mode these buttons allow the user to enter numbers 0 to 9 for selection of selection of CD tracks, DVD chapters and password.
When FLO TV mode these buttons allow the user to select favorite channels and for PIN entry for parental controls. ***
35. DVD Source Button**
This button is only active when remote control is in DVD mode. Each time the button is pressed one of the sources (DVD or USB) will
be selected. If the USB is not plugged in, the unit it will remain on DVD Source. Plug in a USB memory device and press to change
source from DVD to USB.
36. EJECT ()**
This button is used to eject the disc.
11

MENU ADJUSTMENT
The System Menu Contains features and options that let you customize your system to change the PICTURE, FMM, OSD LANGUAGE,
SOURCE DEFAULT FLO and SCREEN MODE.
1) Press the SYSTEM MENU button on the remote, the main page of the system menu will appear on screen.
2) Use the cursor buttons por qto select the desired item in the main page and press the ENTER button to select.
3) The sub menu will appear on screen.
4) Use the cursor buttons por qto select an item in the sub menu and then press the ENTER button to select.
5) Press the System Menu button to exit System Menu.
Note: System Menu can be controlled via Remote Control only. (Items selected in the menu will have a green background)
PICTURE SELECT
When watching program, the picture quality can be adjusted to suit individual preferences.
1) Each time this button is pressed, the on screen picture adjustment displays the “adjustment bar ” for BRIGHTNESS, CONTRAST,
COLOR, TINT or RESET.
2) Once the desired adjustment bar is displayed, use the Volume (+) / Volume (-) button to adjust the setting. The display will automatically
turn off if no adjustments are made within 6 seconds, or is any other button is pressed.
3) Press the qbutton four times to select RESET, then press either Volume (-) or the Volume (+) button on the remote or the main unit.
All of the picture settings (BRIGHTNESS, CONTRAST, COLOR and TINT)will return to the factory setting.
12
BRIGHTNESS
CONTRAST
COLOR
TINT
RESET
SYSTEM MENU
SCREEN MODE
OSD LANGUAGE
SOURCE DEFAULT FLO
PICTURE
FMM
PICTURE

FMM SELECT
FMM ON/OFF options - Turns the FM Modulator on or off.
FMM SELECT option - Selects the wireless FM Modulator Frequency (CH1 88.1MHz, CH2 88.3MHz, CH3 88.5MHz, CH4 88.7MHz, CH5
88.9MHz, CH6 89.1MHz, CH7 89.3MHz, CH8 89.5MHz, CH9 89.7MHz, CH10 89.9MHz, CH11 90.1MHz, CH12
90.3MHz, CH13 90.5MHz, CH14 90.7MHz, Ch15 90.9MHz, CH16 91.1MHz)
OSD LANGUAGE
This allows the user to select the language for the on-screen display.
The user can either select English, Spanish, French, German for the OSD language.
13
OSD LANGUAGE
ENGLISH
SPANISH
FRENCH
GERMAN
SYSTEM MENU
OSD LANGUAGE
SOURCE DEFAULT FLO
SCREEN MODE
PICTURE
FMM
FMM ON
FMM OFF
FMM SELECT
SYSTEM MENU
OSD LANGUAGE
SOURCE DEFAULT FLO
SCREEN MODE
PICTURE
FMM
FMM SELECT

SOURCE DEFAULT FLO
This allows the user to set the system default source to FLO.
Note:
• If selected default source is set to FLO every time the unit’s power is cycled with the source set to something other then FLO, the unit will power
up and automatically switch the source over to FLO.
• Unit will be set to Last Memory on as the default mode of operation.
• Selection of Source default can only be made from within the system menu.
SCREEN MODE SELECT
This allows the user to change the screen format (aspect ratio 4:3, 16:9).
To select the screen aspect ratio format, highlight SCREEN MODE and press the ENTER button to access the submenu. Then press the
Up or down cursor buttons (por q) to select from 4:3 or 16:9. Press ENTER button to confirm the setting.
SOURCE DEFAULT FLO
ON
OFF
SYSTEM MENU
OSD LANGUAGE
SOURCE DEFAULT FLO
SCREEN MODE
PICTURE
FMM
SYSTEM MENU
OSD LANGUAGE
SOURCE DEFAULT FLO
SCREEN MODE
PICTURE
FMM
4:3
16:9
14
SCREEN MODE

15
SETTINGS AND ADJUSTMENTS
SETTINGS
1. To set the desired option, move the highlight into the setup area using the cursor button u.
2. After entering the setup area, highlight the desired option using the cursor button or .
3. Press uto open the sub menu that contains the different options available. Press to highlight
the desired option, and press ENTER to confirm the selection.
4. Repeat steps 3~4 to set the options that reside on the same Home Page.
5. To change to another Home page, press the to position the highlight back on the icon side
of the Home Page. Then, repeat steps 2~5.
Exiting the Setup Menu
Press the Black button again.
LANGUAGE SETUP
Language for On-Screen Display
The Language Menu setup allows you to select the language for the on-screen display.
The user can either select English, French, Spanish or German for the language.
qu
qor u
Black ( )
( )
SLIDESHOW DURATION SETUP
Select “SLIDESHOW DURATION” using qbutton. The user can either select 1 hour, 3s, 5s, 15s,
1 mins and 15mins, then select the Slideshow Duration you desire using ubutton, then press
“ENTER”/ ( ) to confirm the setting. Press Black ( ) button to return.
HOME
USB SETTINGS
SETTINGS
C:/
Language
Slideshow duration
Music repeat mode
Movie repeat mode
Autorun
Default
Slideshow mode
English
1hour
Repeat all
Repeat one
Off
Random
V2010-05-14
SETTINGS
C:/
Language
Slideshow duration
Music repeat mode
Movie repeat mode
Autorun
Default
Slideshow mode
English
1hour
Repeat all
Repeat one
Off
Random
V2010-05-14

SETTINGS
C:/
Language
Slideshow duration
Music repeat mode
Movie repeat mode
Autorun
Default
Slideshow mode
English
1hour
Repeat all
Repeat one
Off
Random
V2010-05-14
16
SLIDESHOW MODE SETUP
Select “SLIDESHOW MODE” using qbutton.
hen select the Slideshow Mode you desire using button, then press
“ENTER”/ to confirm the setting. Press Black ( ) button to return.
The user can either select Random, Fading, Off,
Bottom_To_Top, Top_To_Bottom, Left_To_Right, Right_To_Left, Door_Close, Door_Open,
Hori_Cross and Verti_Cross, t u
( )
MUSIC REPEAT MODE SETUP
Music Repeat Mode function has 2 options : Repeat one and Repeat all. Move cursor to using
ubutton, then press “ENTER”/ ( ) to confirm the setting. Press Black ( ) button to return.
Repeat one Repeat the song being played until STOP is pressed.
Repeat all Play all songs repetitively.
MOVIE REPEAT MODE SETUP
Movie Repeat Mode function has 2 options : Repeat one and Repeat all. Move cursor to using
ubutton, then press “ENTER”/ ( ) to confirm the setting. Press Black ( ) button to return.
Repeat one Repeat the movie being played until STOP is pressed.
Repeat all Play all movie repetitively.
SETTINGS
C:/
Language
Slideshow duration
Music repeat mode
Movie repeat mode
Autorun
Default
Slideshow mode
English
1hour
Repeat all
Repeat one
Off
Random
V2010-05-14
SETTINGS
C:/
Language
Slideshow duration
Music repeat mode
Movie repeat mode
Autorun
Default
Slideshow mode
English
1hour
Repeat all
Repeat one
Off
Random
V2010-05-14