Aura Light Ribes User manual

Aura Light AB, Sweden
Phone customer service [phone]
[email protected], www.auralight.com 2021-02-09
Ribes
Installation manual
1
a
b
c
Installation Steps
: Install the track to the ceiling as shown in picture .
: Turn the power supply to position  and then rotate
the shift as shown in picture .
: Assembly the track head into track as shown in picture .
: Rotate the shift to ° as picture , rotate  as your
requirement, switch can rotate  in clockwise and
anticlockwise as shown in picture .
: Installation is complete as shown in picture .
2
a
b
I-162
3
a
4
a
b
5

Aura Light AB, Sweden
Phone customer service [phone]
[email protected], www.auralight.com
Ribes
Disassemble steps
100
18 8
Disassemble Steps
: Turn the power supply to position  and rotate
the shift to ° as shown in picture .
: Pull the spotlight gently downward
from the track as shown in picture .
1
2
a
a
b
Cautions!
: Make sure the power is disconnected between the spotlight and
the track before spotlight disassembly.
: The installation operator must hold a qualified electrician certificate.
: Check the luminaire and assessories before installation. If there is
any damage in lamp body or glass, please stop the installation.