Aura Light Sevede CE User manual

Aura Light AB, Sweden
Phone customer service [phone]
[email protected], www.auralight.com 2022-10-26
Joint Bracket Kit – Sevede CE & PE
Installation manual
1: Prepare luminaires.
Joint bracket.
Excenter lock. Start and End.
I-195
2: Move Joint bracket to exact position.
Secure with screws.
Important!
Sevede Start.
Sevede End.
3 a: Mount “Sevede Start” according to the
manual for standard Sevede CE/PE.
Cable. CeilingPendant
brackets (x).
3 b: Mount “Sevede End”.
Slide into “StartMid”.
4: Join luminaires mechanically
with metal excenter lock.
Metal excenter lock.

Aura Light AB, Sweden
Phone customer service [phone]
[email protected], www.auralight.com
Hinge.
Keep inside cables away when
attaching inner proles!
Secure optical sheet
and keep it centered. Press and click.
Light trap. Light trap.
Light trap. For longer light lines.
Visualization
2022-10-26 I-195
5: Attach inner profiles.
6: After installation; move optics to centre, without
any light gaps. Place “light traps” at each end.
Applicable for opal and microprismatic versions.
Keep inside cables away when
mounting inner prole!
Cross section visualization.
Note: The light source contained in this luminaire shall only be replaced by the manufacturer
or his service agent or a similar qualified person.
Basic insulation between supply- and control-terminals (DALI).
If the external exible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualied person in order to avoid a hazard.