Ballard Designs Klein Easel User manual

PRODUCT NAME: Klein Easel Lamp
ITEM NUMBER: LA291
ASSEMBLED DIMENSIONS: 31”H x 11.25”W x 8”D
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
Page 1 of 3
MADE IN INDIA
IMPORTANT SAFETY INSTRUCTIONS:
-This Lamp has a polarized plug (one blade is wider than the other) as a feature to reduce the risk
of electric shock. This plug will fit in a polarized outlet only one way. If the plug does not fully fit in
the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Never use with an
extension cord unless plug can be fully inserted. Do not alter the plug.
-For your safety, please read instructions carefully and completely before beginning assembly
or installation.
-Product must be installed according to applicable code(s) by a person familiar with its construction
and operation.
-This Lamp rated up to 35 Watt MAX Type GU10 Bulb (not included).
WARNING:
-Deviation from assembly instructions may cause risk of fire or electric shock.
-To reduce risk of personal injury, always turn off fixture and allow bulbs to cool prior to
replacement.
-Do not touch or look directly at illuminated bulbs.
-Keep flammable material away from illuminated bulbs.
UPDATED: 1-5-2020
Customer Service: 800-367-2810
Online: www.ballarddesigns.com

Remove all parts, hardware and protective packaging from
carton and carefully arrange on a clean, level surface.
NOTE: To avoid accidentally discarding small parts or
hardware, retain all carton contents until assembly
and installation are complete.
Approved Location for Use: Dry Indoor Environment
Assembly Time: 10 Minutes
HARDWARE AND COMPONENTS
INCLUDED:
Page 2 of 3
Unplug lamp prior to installation or removal.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
NOT INCLUDED:
1-Pin Base *35 Watt Max
Type GU10 LED Bulb
G
U
-
1
0
*Prevent Damage: Use 35 watt or smaller bulb.
Cleaning and Care
Periodically wipe Fixture with a soft, dry cloth.
Avoid harsh or abrasive chemicals as
finish damage may result.
1 - Lamp Body
with attached shade

Keys
Thumb Screws Easel Brackets
Pivot Points
Lamp designed to articulate at pivot points.
Gently loosen key, resposition, then retighten key.
CAUTION: Do not over-tighten.
Easel Brackets designed to move up and down
on Lamp Body. To adjust, gently loosen knurled
thumb screw, move bracket up/down, then
retighten screw.
Page 3 of 3
ADJUST/POSITION LAMP:
INSTALL BULB:
Gently align bulb pins into socket base then
turn to lock in place. Lamp rated up to
a 35 Watt MAX GU10 Pin Type LED Bulb
which is not included.
NOTE: To mimic incandescent light color,
choose 2700K Soft White.
Unplug lamp prior to installation or removal.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com