AURAFINA V3021D User manual

R
THE CABINETRY & BATH COLLECTIONS
VANITY CABINET ASSEMBLY GUIDE
Item No: V3021D
WELCOME TO AURAFINA READY-TO-ASSEMBLE VANITIES
Thank you for purchasing an AURAFINA ready to assemble vanity. You are on your
way to a beautiful, new bathroom vanity. There are a few simple tools necessary, and
some set up of your preparation area before you get started. Our vanities go together
easily, but you may want to ask a friend for assistance when putting together larger
vanities. One of you can align the components while the other screws them together.
Once you get going, assembly gets easier as you improve your learning curve! By
assembling your own vanity, you are saving the thousands that companies charge for
“semi-custom” vanities.
Equipment: Phillips Head screw driver, at head screw driver, cordless electric drill with the at
and Phillips attachment bits (not necessary, but is a time saver). and rubber mallet.
Prep Area: A dirt free carpet or the foam sheets and cardboard from your cabinet will provide you
with a scratch free cushioned work area. To save your back, working at table height is always a
good idea.
Unpack your vanity components and spread out the panels on your smooth prep surface. Keep
tools and the package of hardware screws, brackets, etc close by, but not under any of the
panels. Vanities ship with the hinges already secured to the door frame faces, making installation
quicker. We pre-drill all holes for easy acceptance of our hardware. All hardware, mounting
brackets, shelves, drawer pulls and screws (plus extra) are provided. Hardware is packaged
separate from the cabinet panels so there is no damage. Dovetailed drawers can be tapped
together with a rubber mallet.
 PREPARE VANITY FOR ASSEMBLY
www.AURAFINA.comPAGE 1

www.AURAFINA.comPAGE 2
PARTS LIST
Front Frame
1 pc
Back Panel
1 pc Toe Tick 1 pc Drawer Front 2 pcs
Drawer Back
2 pcs Drawer Bottom 2 pcs
Drawer Left Side
2 pcs
Drawer Right Side
2 pcs
Right Side
1 pc Left Side 1 pc Bottom Panel 1 pc
A B
E F
C D
G
I J K
H

www.AURAFINA.comPAGE 3
HARDWARE LIST
Male Bracket
14 pcs
Glide Right Lock
2 pcs Glide Left Lock 2 pcs Left Glide 2 pcs Right Glide 2 pcs
Female Bracket
14 pcs Plastic Bracket 4 pcs
Glide Support
4 pcs
3 x 12mm
3 x 25mm 3 x 12mm 4 x 16mm
Round Head Screw
78 pcs
Flat Head Screw
20 pcs Flat Head Screw 8 pcs
Round Head Screw
2 pcs
1
5
2 3 4
6 7
910 11 12
8

Place front frame (A) and back panel (E) and toe tick (F) upside down on a smooth, at surface
to avoid any scratches.
Attach the male bracket (1) to front frame (A) and back panel (E) and toe tick (F) using
round head screws (4) and screw driver (not included) to Fasten.
Attach the glide support (8) to back panel (E) using at head screw (6) and screw driver (not
included) to fasten.
www.AURAFINA.comPAGE 4
 PREPARE VANITY FOR ASSEMBLY
44
4
4
4
4
44
1
1
1
1
1
1
11
E
4
44
4
4
4
1
8
8
8
8
6
6
6
6
6
1
1
1
1
1
A
F

www.AURAFINA.comPAGE 5
 PREPARE VANITY FOR ASSEMBLY
Place right side (B) and left side (C) and bottom panel (D) upside down on a smooth, at surface
to avoid any scratches.
Attach the female bracket (2) to right side (B) and left side (C) and bottom panel (D) using
round head screws (4) and screw driver (not included) to Fasten.
4
22
2
2
2
2
2
2
22
22
22
4
4
4
44
44
4
4
44
4
4
B
C
D

www.AURAFINA.comPAGE 6
 ATTACH SIDES TO FRONT
Place front frame (A) face down onto padded work surface.
Line up fasteners on the right side (B) and left side (C) of the vanity to the front frame (A).
Lock fasteners in place and fasten with round head screw (4).
B
C
A4

www.AURAFINA.comPAGE 7
 SLIDE IN VANITY BOTTOM PANEL
Slide bottom panel (D) into the grooves of right side (B) and left side (C), Lock fasteners in
place and fasten with round head screw (4).
4
B
C
D

www.AURAFINA.comPAGE 8
 LOCK IN BACK PANEL
Line the back panel (E) to the right side (B) and left side (C). Lock fasteners in place and
fasten with round head screw (4).
Attach back panel (E) to the bottom panel (D) using round head screw (5) and
screw driver (not included) to Fasten.
CD
E
4
5
5

www.AURAFINA.comPAGE 9
 TOE KICK INSTALLATION
Line the toe kick (F) to the right side (B) and left side (C). Lock fasteners in place and
fasten with round head screw (4).
BD
F
4

www.AURAFINA.comPAGE 10
 DRAWER SLIDE INSTALLATION
Slide drawer left glide (11) and drawer right glide (12) into glide support (8).
Line the front of the glide so it’s ush with the front of the frame, and lined up with
the pre-drilled holes. Screw in place with at head screw (7).
Repeat on other side of vanity.
8
12
7
7
7

www.AURAFINA.comPAGE 11
 PUT TOGETHER DRAWERS
You’ll nd drawerfront (G), drawer right side (I), drawer left side (H) drawer back (J) and
drawer bottom (K) that make up the drawers. All of our vanities have dovetailed joints.
Just line up the holes and screw together. Line up the parts, then hang front edge over
an elevated work surface. Gently tap joints together with a rubber mallet.
G
J
J
G
G
G
K
K
K
H
I
II
I
A B
C D

www.AURAFINA.comPAGE 12
 PUT TOGETHER DRAWERS
Attach glide right lock (9) and glide left lock (10) to the bottom front of the drawer using
at head screw (6).
9
6
9
10
J
K
H

www.AURAFINA.comPAGE 13
 INSTALL DRAWER TO VANITY BOX
Take assembled drawer and line it on top of the metal glides. Push the back of the
metal glide into the pre-drilled hole located at the back of the drawer until it’s ush with
the back portion of vanity. The mechanism will come together with a few clicks.

www.AURAFINA.comPAGE 14
 BRACING
Screw in vinyl corner braces and you are done!
Attach plastic bracket (3) to the vanity, using round head screw (4).
44