Aurora TAURI TSS-10 User manual

TAURI Quick Reference Guide TAURI Quick Reference Guide
TAURI Temperature-Check Tablets
About TAURI and this guide:
The TAURI Temperature-Check Tablets are designed to detect temperature
anomalies. It’s important to understand there are many factors, including
environmental and physiological that can impact a person’s surface
temperature reading. Skin surface temperature vs actual core body
temperature may differ either way. The TAURI Temperature-Check Tablets
must be operated in accordance with the manufacturer’s user guide. TAURI
Temperature-Check Tablets are not intended nor designed to diagnose or
detect medical conditions including, but not limited to, viruses or other illnesses.
The TAURI temperature-check tablets should only be used to detect variations
in surface temperature. In the event that an elevated skin temperature is
detected, the subject should be advised to check temperature with an
approved medical thermometer and the finding confirmed. Absence of an
elevated skin temperature does not preclude a fever.
Power Connection:
Connect power-in to the external female power cable of TAURI.
Software Set Up:
1. Press the “setting” icon on the top left corner and enter password
“0000“.
2. Adjust the temperature range, volume, change the
password and check firmware update in the settings.
Press “Save and back” at the bottom left after you
have finished your settings.
TSS-10 TSS-15 TSS-21

TAURI Quick Reference Guide TAURI Quick Reference Guide
TAURI Mounting Options (TAURI all sizes):
WMT-1 Wall Mount APS-1 Pole Stand
DTM-1 Desktop Mount
DTM-2 Desktop Mount
DTM-3 Desktop Mount
General Mounting Instructions:
-Align the mount holes on the rear of the TAURI tablet with the mount
holes on the stand
-Attach the mount to the tablet using the included screws.
For further setup information, please visit https://auroramm.com
Aurora Multimedia Corp.
205 Commercial Ct
Morganville, NJ 07751
[phone]
[email protected]
[e-mail]

TAURI Quick Reference Guide TAURI Quick Reference Guide