Aus Electronics Direct AA6612 User manual

No.
Description
Introduction
①
IR receiving window
Receive the commands sent by the infrared remote control.
②
HDMI input indicators
The selected input channel indicator will light up.
③
HDMI output indicator
Lighting when OUTPUT port has signal output.
④
HDMI input port switch
button
Short press: Loop to select the INPUT 1-4 channel
Long press: Auto switch function enabled or disabled.
(Enabled by default). When the input channel LED indicator
flash for one time, the auto switch is turned on; when the input
channel LED indicator flash for three times, the auto switch
function is closed.
⑤
Power status indicator
Lighting when power on.
No.
Description
Introduction
①
Power jack
Requires 5V power supply
②
HDMI output port
Connects to TV/monitor by HDMI cable
③
HDMI input ports
Connects to your source device by HDMI cable. Supports 4 inputs.
* Please take out the film at the rear of the remote before you use. Please insert the film to remote rear if you do
not use the remote for long time.
Battery Type: CR2025 3V.
Remote
keys
Panel
keys
Functional description
OFF /
/
Enable Standby mode
In standby mode, all input indicators are off
ON /
SWITC
H
Disable Standby mode
Press the SWITCH button to power on in
standby state
1 ~ 4
SWITC
H
Input channel selection
AUTO
AUTO
Auto switch function enabled or disabled.
Press the Panel key more than 3 seconds
to enable or disable this function.
∧/∨
SWITC
H
Loop to select the INPUT1-4 channel

Connection and operation:
1. Connection Diagram
2. Installation
2.1 Connect OUTPUT port of switch to HDMI input port of TV/Monitor by HDMI cable.
2.2 Connect HDMI output port of video source (BD player, PC...) to INPUT port of switch by HDMI cable.
2.3 Connect the power adapter to the DC 5V jack of the switcher and turn on the power.
2.4 Press the SWITCH button to switch between the four input ports.
3. Matters needing attention:
3.1 Function description of "Auto switch”
Source (PC/PS5/XBOX/BD/STB)
TV/Display
Power
Adaptor
HDSW0033M1
HDMI Cable
HDMI Cable
HDMI Cable
HDMI Cable
HDMI Cable

The Switch can support input channel Auto Switch function, it can auto jump to the input channel port that
just have HDMI Cable connected(means have new Signal Source connected); it can also auto jump to
other input channel port that have signal input if the current channel signal source is closed (Power needs to
be cut off for some equipment) or the current input port HDMI cable is taken out. The Auto function can be
turned on/off by the pressing the【AUTO】key at the panel or remote.
3.2 If the signal resolution is 8K@60 or 4K@120, please use HDMI2.1 standard cables, and the cable should
be as short as possible.
3.3 The product has power off memory function. The setting state of the output channel is recorded and
saved. After the power is off, the saved data will be automatically retrieved for configuration.
SPECIFICATIONS:
Model name
4 Port 8K HDR HDMI Switch
Input ports
HDMIX4,DC X1
Output ports
HDMIX1
Video format
480P/720P/1080P/2160P@24/25/30/50/60/100/120Hz
Up to 4320P@50/60Hz(YCC420), Support HDR/Dolby Vision
Deep color
8/10/12/16Bit@2160P
8/10bit@4320P
Audio format
Dolby HD/DTS HD/Dolby Atoms/Dolby AC3/DTS/LPCM Etc.
Transmission bandwidth
1GHz Max.
Transmission rate
40Gbps Max.
IR distance
≤5m
Input cable length
4320P≤3m,2160P≤5m,1080P ≤10m(AWG 26 Standard cable)
Output cable length
4320P≤3m,2160P≤5m,1080P ≤10m(AWG 26 Standard cable)
Power adapter specification
AC 100~240V/ DC 5V/1A
Max working current
400mA
Size
196.2*66.6*20.8 (mm)
Weight
270g
Accessories
Manual, Remote, Power Adaptor