AUSnew G6 Excel User manual

RM160-56
RM160-61
G6 Excel Bariatric Wheelchair

Your Local Dealer:
Imported by
Rehab and Mobility Wholesalers Pty Ltd
P: 1300 368 085
E: [e-mail]
www.rehabandmobility.com.au
Warranty
All products carry a 12 month warranty from the date of
purchase against manufacturing defects.
Misuse or Damage is not covered.
This warranty does not affect your statutory rights.

Congratulations on the purchase of your new G6 Excel Wheelchair. Equipped
with several features and accessory choices you are sure to enjoy the
benefits of this chair.
Please follow these simple steps to assemble your wheelchair –
1. With the chair upright, push down on the sides of the seat until it
clamps into position.
2. Height adjustable canes can be adjusted for the individual career by
loosening the screws at the base of the cane, adjust and retighting.
3. Fit legrests (both left and right) into the fitting from an outward angle
and turning inward until it locks into position. Footplate height can
be adjusted using the allen key provided. Loosen the footplate and
select the desired height, retighten to secure. Elevating legrest are
available for this chair and fit into place the same way as the
standard legrests. To adjust loosen the screw, select the desired
angle and retighten.
4. G6 Self Propel Wheelchairs have a quick release 24” wheel. To
release push the centre button on the axle and pull out. To reinstate
locate the axle back into bracket on the frame. Ensure it is fully
engaged before using the chair.
5. Armrests flip back and are removeable. To release the armrest push
the clip at the front and flip back, to re-instate clip back into the front
bracket and ensure it locks into place. To remove armrest push clip at
the front and pull lever at the rear then lift armrest out. Again
ensure clipped back in securely when replacing.
6. Care-assist hand brake provides added security for the person
pushing the chair. When the wheelchair is stationary, the hand brake
at the wheel should be applied for added security. To apply wheel
brake push forward, to release pull back.
Assembly / Adjustment

7. Anti-tip wheels can also be fitted to this chair, they provide safety
when the user is ascending ramps and steep inclines, preventing the
wheelchair from tipping backward. If not required they can be
adusted up.
8. To fold your Wheelchair, ensure both wheel brakes are locked. Flip
the footplatess up and remove. Lift the seat in the middle (holding
front and back) and pull up. The chair sides will come together. At
this time you can also remove the large Self Propel wheel if required
to make the chair lighter and more compact for stowing.
It is important to never exceed this limit and always ensure that the
product weight capacity is sufficient before using the product. Failure
to do so could result in injury or damage the product.
Maximum User Weight
All of the product components are manufactured from high quality
materials. However, it is very important that you carry out regular
checks: all nuts, bolts, knobs and handles should remain secure.
Wheels should move freely and brakes engage when applied. To
ensure the best from your rollator it should be kept well maintained.
In the event of identifying any irregularities you should contact your
local distributor for advice.
NB: Your wheelchair should only be used for its intended purpose.
Care & Maintenance
Product Code Description Weight Limit
RM160-56 G6 Wheelchair Self Propel 56cm seat 250kg
RM160-56D G6 Wheelchair S/P 56cm seat with Drum Brake 250kg
RM160-61 G6 Wheelchair Self Propel 61cm seat 250kg
RM160-61D G6 Wheelchair S/P 61cm seat with Drum Brake 250kg