AUSPURE KITCHEN AusFroth-06 User manual

AUSPURE - SUPPORT
www.auspure.com/au |[email protected]
User Manual
Advanced Cafe Milk Frother
Model: AusFroth-06

Thank you
Thank you for purchasing the Advance Cafe Milk Frother by Auspure
Kitchen. We are committed to providing our customers with high
quality products for having a reliable facilitated kitchen in their house.
Should you have any questions or concerns about using your Auspure
products, feel free to contact our helpful customer support team at
suppor[email protected] We hope you enjoy using this product and
we will be more than happy to assist our valued customers for any
inquiry related to Auspure products.
Copyright © Since 2021, Auspure Australia, All Rights Reserved.
This user manual is protected by copyright. It is not permitted to photocopy these instructions for
use or translate them into another language without the prior written consent of Auspure Australia.

TABLE OF CONTENTS
SAFETY INSTRUCTIONS
PARTS NAME
GETTING TO KNOW YOUR MILK FROTHER
BEFORE THE FIRST-TIME USE
GETTING STARTED
CLEANING AND CARE
STORAGE
DISPOSAL
TROUBLESHOOTING
WARRANTY INFORMATION
DEFECTIVE PRODUCT AND RETURN
AUSPURE CUSTOMER SUPPORT
4
5
6
7
8
14
14
14
15
16
20
20
PACKAGE CONTENTS
TABLE OF SPECIFICATIONS
1×Auspure Milk Frother
1 × Stainless Steel Milk Jug
1 × Chocolate Cover Whisk
1×Mesh Tea Infuser
1×Whisk Holder
1 × Frothing Whisk
1 × User Manual
1 × Warranty Card
Product Model AusFroth-06
Product Brand Auspure Kitchen
Power Supply 220-240 V ~, 50/60 Hz
Rated Power 500 W
Max Capacity 0.6 L
Product Weight 1.5 kg
Dimensions
20 ×16.7 ×24.6 cm
3

Please read carefully and make sure following all instructions provided in this user manual before using the product. Failure to
comply with the instructions given in this user manual may result in serious injury and/or damage to you or the product.
• Before using the Milk Frother for the first time, REMOVE and DISPOSE OF all packaging material and promotional labels carefully.
• Before discarding the packaging, double-check that you have received all indicated parts.
• MAKE SURE power supply matches with voltage indicated on this product before use.
• DO NOT touch any live part of the device when it is powered on.
• Frothing whisk is a choking hazard, close supervision is necessary when any appliance is used by or near children. Children
should be supervised to ensure that they do not play with the appliance.
• DO NOT place any part of product on or near gas, electric burner and in a heated oven.
• DO NOT let cord hang over edge of table or counter or touch the hot surface.
• DO NOT place the Milk Frother in a cabinet when in use.
• DO NOT operate the product with a damaged cord or plug, if its main cord is damaged, it must be replaced by the manufacturer,
the nearest service agent or a qualified person.
• Using an accessory NOT recommended by the manufacturer for use with this appliance may result in fire, electric shock, or
injury to persons.
• DO NOT immerse appliance, cord, or plug in water or other liquid.
• DO NOT place the base in dishwasher.
• ALWAYS unplug from outlet when not in use and before cleaning.
• To disconnect the machine from power outlet, gently grasp the plug and remove, DO NOT pull the cord.
• DO NOT use the product for other unintended purpose and place it in a dry storage.
• DO NOT use the Milk Frother unattended while it is operating.
• The appliance should NOT be operated by children NOR shall play with the appliance.
• DO NOT let children or people with reduced physical or mental capabilities to use or clean the Milk Frother.
• While operating the appliance, care should be taken to NOT get burned by the steam.
• DO NOT touch hot surface of the Milk Frother, use handles or knobs only.
• MAKE SURE to stand the appliance on a table or flat surface.
• DO NOT use cleansers, steel wool pads, or other abrasive material for cleaning the unit. When cleaning, only use a soft cloth and
mild detergent.
• For reducing the risk of fire, DO NOT store anything directly on top of the Milk Frother when the appliance is in operation mode.
• DO NOT operate the appliance without full assembling of all parts.
• DO NOT overfill the water/milk for making tea, hot milk and chocolate from Max indication line. Also, DO NOT overfill the milk
from max indication line for hot and cold milk foam.
• When assembling, using, or storing the milk frother, DO NOT put anything on top of it.
• PLACE the device at least 20 cm away from walls, drapes, and other heat or steam sensitive materials, with enough space above
and on all sides to allow for air circulation.
• MAKE SURE to keep your milk frother clean at all times. Follow the cleaning instructions in this user manual.
• DO NOT attempt to disassemble this appliance for any reason. If your milk frother is broken or no longer functions properly,
immediately discontinue use and contact customer support.
• This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, offices and other working environments
– farm houses
– by clients in hotels, motels, and other residential type environments
– bed and breakfast type environments
• Misuse may cause injury.
SAFETY INSTRUCTIONS
KEEP THESE IMPORTANT SAFETY INSTRUCTIONS IN
A SAFE PLACE FOR FUTURE REFERENCE
4

PARTS NAME
Transparent Lid
Handle
Stainless Steel Milk Jug
Milk Frother Base
Function Chromed Knob
Start/Stop Button
Power Cord
Frothing Whisk
Whisk Holder
Chocolate Cover
Mesh Tea Infuser
MAX Level for Heating (600 ml)
MAX Level for Frothing (300 ml)
MIN Level for Frothing or Heating (125 ml)
5

GETTING TO KNOW YOUR MILK FROTHER
Introduction
AusFroth-06 is an advanced and robust electric Milk Frother designed by Auspure
kitchen. It is featured with six automatic settings which allows you to make warm and
hot milk, hot or cold foam for frothy coffees including cappuccino and cafe latte as well
as making hot tea and chocolate milk.
Control and Settings
NOTE: The difference between hot thin and hot thick milk is the rotation speed to
make different foam level.
6
SymbolWhisk Function
Hot thick
milk foam
Hot thin milk
foam
Cold milk
foam
Warm milk
Hot chocolate
Hot milk tea
Max
Capacity
300 ml
300 ml
300 ml
600 ml
600 ml
600 ml
Temperature
55-70 oC
55-70 oC
No heat
45-55 oC
70-85 oC
80-95 oC

BEFORE THE FIRST-TIME USE
Make sure to remove any advertising labels and packing materials from your Auspure
Milk Frother before using it for the first time.
In warm soapy water, thoroughly clean the frother jug and its lid. Wipe the outside of
the appliance with a soft damp cloth and let it dry completely. Your Milk Frother is now
ready for real use.
IMPORTANT NOTE: Do NOT put the milk frother base, power cable, or plug in the
dishwasher, and Do NOT submerge them in water or other liquids.
7

OPERATING YOUR AUSPURE MILK FORTHER
AusFroth-06 Milk Frother has six operating functions to assist providing different types
of cafe style milk, chocolate, and coffee. By simply turning the position of the knob to
desired option/mode, the milk will froth according to its preset setting.
General Instructions on Operating Your Milk Frother:
1. Make sure the product is assembled well.
2. Once connected to the power source, the buzzer will beep once, and white
LED will turn on. After 30-sec, if there is no setting operation, the LED
light will flash for 3 seconds and 3 beeps, then the light will turn OFF.
3. It is normal to have slight smoke when using this product for the first time.
4. If you unplug or disconnect the machine from power source during
operation and connect the machine again later, there will be a beep with
turning on the LED light. This indicates STAND BY mode.
5. When you switch the mode during operation, it beeps once, the blue LED
light turns to white, and machine stops working. For operation again, you
need to press the START button after selecting a new mode.
General Note on Milk Frothing Functions:
1. The operating time varies with the environment, milk type and initial
temperature of the milk.
2. Low-fat milk and skimmed milk with too low-fat content are not suitable
for milk frothing. Both pure milk and whole milk can make milk froth.
Whole milk has better milk froth and lasts longer.
3. After each use, it is recommended to wait for the Milk Frother to cool
fully before use.
8

For producing different types of milk, each of the preset option and its operation is
described below:
Hot Thick Milk Foam / Hot Thin Milk Foam
For making Hot Thick Milk Foam or Hot Thin Milk Foam, follow the steps below:
1. Make sure the frothing whisk “ ” is properly attached to whisk holder inside
the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for frothing (300 ml).
3. Connect the plug of milk frother to the power source according to its required
standard rating power supply.
4. Turn the knob to the “ ” for Thick Milk Foam or “ ” for Thin Milk Foam.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator
light, the motor and heater will start to operate.
6. Once the temperature reaches 65 oC the machine ends its operation. It beeps
once and the blue indicator light turns to white (indicating STAND BY MODE).
The milk foam is ready to use and for best result should be immediately used.
7. After 30-sec of not using the machine, the indicator light keeps flashing for 3
seconds with beeping 3 times and then stops and the LED light turns OFF.
NOTE-1: The heating and stirring option will be both functioning during this operation
mode to produce proper Hot Thick or Thin Milk Foam.
NOTE-2: The preparation time of Hot Thick or Thin Milk Foam is about 5 min and
depends on temperature reaching 65 oC. Once the built-in temperature
sensor detects the preset temperature, it stops forthing.
65 oC
9
Add the milk
and select the
desired option
Press the
start button
and wait
Finish &
ready to use
Attach the
disk

Cold Milk Foam
For making Cold Milk Foam, follow the steps below:
1. Make sure the frothing whisk “ ” is properly attached to whisk holder inside
the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for frothing (300 ml).
3. Connect the plug of milk frother to the power source according to its required
tandard rating power supply.
4. Turn the knob to “ ” Cold Milk Foam mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator
light, the motor will start to rotate.
6. The machine will end up its operation after 2 minutes and the LED light will turn
into white from blue. It beeps once and the blue indicator light turns to white
(STAND BY MODE).
7. After 30-sec of not using the machine, the indicator light keeps flashing for 3
seconds with beeping 3 times and then stops and light turns OFF.
NOTE-1: The only stirring option will be functioning during this operation mode to
produce proper Cold Milk Foam. The built-in heater will not be active for this mode.
NOTE-2: The preparation time of Cold Milk Foam is 2 minutes. Once the preset build-in
timer reads 2 minutes of operation, the frothing will end.
2 min
10
Add the milk
and select the
desired option
Press the
start button
and wait
Finish &
ready to use
Attach the
disk

Warm Milk
For making Warm Milk, follow the steps below:
1. Make sure the frothing whisk and chocolate cover “ ” are properly attached
to whisk holder inside the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for heating (600 ml).
3. Connect the plug of milk frother to the power source according to its required
standard rating power supply.
4. Turn the knob to the “ ” Warm Milk mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator
light, the motor and heater will start to work.
6. Once the temperature reaches 50 oC the machine ends operation. It beeps once
and the blue indicator light turns to white (STAND BY MODE).
7. After 30-sec of not using the machine, the indicator light keeps flashing for
3 seconds with beeping 3 times and then stops and light turns OFF.
NOTE-1: The heating and stirring option will be both functioning during this operation
mode to produce proper Warm Milk.
NOTE-2: The chocolate cover whisk should be used for this function along with
frothing whisk to prevent the milk producing foam.
50 oC
11
Add the milk
and select the
desired option
Press the
start button
and wait
Finish &
ready to use
Attach the
disk

Hot Chocolate
For making Hot Chocolate, follow the steps below:
1. Make sure the frothing whisk and chocolate cover “ ” are properly attached
to whisk holder inside the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for heating (600 ml).
3. Connect the plug of milk frother to the power source according to its required
standard rating power supply.
4. Turn the knob to the “ ” Hot Chocolate mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator
light, the motor and heater will start to work.
6. During operation, add the desired amount of coca powder, then put in the lid and
let the liquid immersed the coca powder or chocolate pieces and to melt and
produce fresh Hot Chocolate.
7. Once the temperature reaches 80 oC the machine ends operation. It beeps once
and the blue indicator light turns to white (STAND BY MODE).
8. After 30-sec of not using the machine, the indicator light keeps flashing for 3
seconds with beeping 3 times and then stops and light turns OFF.
NOTE: The heating and stirring option will be both functioning during this operation
mode to produce proper Hot Chocolate drink.
80 oC
12
Add the milk
and select the
desired option
Press the
start button
and wait
Finish &
ready to use
Attach the
disk

Hot Milk Tea
For making Hot Milk Tea, follow the steps below:
1. Make sure the frothing whisk, chocolate cover, and mesh tea infuser “ ” are
properly attached to whisk holder inside the milk jug before operation.
2. Fill the jug with fresh milk up to Max level indicated for heating (600 ml).
3. Connect the plug of milk frother to the power source according to its required
standard rating power supply.
4. Turn the knob to “ ” Hot Milk Tea mode.
5. Press the START/STOP button, the buzzer beeps once with the blue indicator
light, the motor and heater will start to work.
6. During operation, add the tea leaves in the tea making accessory. And then put in
the lid and let the liquid immersed the tea leaves producing fresh Hot Milk Tea.
7. Once the temperature reaches 90 oC the machine ends operation. It beeps once
and the blue indicator light turns to white (STAND BY MODE).
8. After 30-sec of not using the machine, the indicator light keeps flashing for 3
seconds with beeping 3 times and then stops and light turns OFF.
NOTE: The heating and stirring option will be both functioning during this operation
mode to produce proper Hot Milk Tea.
90 oC
13
Add the milk
and select the
desired option
Press the
start button
and wait
Finish &
ready to use
Attach the
disk

CLEANING AND CARE
Care should be taken for last longing and perfect operation of your
Auspure Milk Frother.
Both the milk jug and frothing whisk should be cleaned immediately after
each use to prevent build-up of milk residue. For safe cleaning follow the
instructions below:
1. Unplug the power cord from the power outlet before cleaning.
2. To avoid the risk of electric shock, do not clean the base or the power
cord with water and do not immerse them.
3. The milk jug and frothing whisk will be hot immediately after use, so
carefully remove the milk jug from the power base and fill with tap
water. Once the milk jug and frothing whisk have cooled completely,
remove the frothing whisk and rinse OFF any milk in warm water.
4. Wash the milk jug, jug lid, and frothing whisk in warm soapy water.
5. Rinse and dry them thoroughly.
6. Store the cleaned milk jug, jug lid, and frothing whisk in safe place
away from children.
7. The milk jug, lid and frothing whisk are dishwasher safe.
STORAGE
If not using your Milk Frother for an extended period of time, the following
points must be considered for safe storage.
•Turn OFF the machine and then unplug from the power outlet.
•Follow the instructions on “CLEANING AND CARE” section to clean
the unit and ready for storage.
•Store in a dry and safe place in upright position.
•Do not store anything on the top of the Milk Frother.
DISPOSAL
•To prevent possible harm to the environment or human health from
uncontrol waste disposal, separate the unneeded Milk Frother and its
related accessories from other types of wastes.
•Ask your local council where to dispose of your Milk Frother and its
related accessories.
•You should not throw your Milk Frother and its related accessories
away with the daily normal household waste.
14

TROUBLESHOOTING
Ensure that the appliance is plugged
properly into a functioning outlet.
Milk might be too hot to foam.
1. Use the milk at refrigerator
temperature.
2. Do not use low-fat milk and skimmed
milk. Whole milk has better milk froth
and its foam last longer.
3. Do not re-foam already heated milk.
4. Try to reduce the quantity of milk in
the milk jug.
1. Ensure the milk jug is correctly
positioned onto the power base.
2. Ensure that the Milk Frother has been
properly turned on.
1. Frothing whisk might not placed
correctly.
2. The frothing whisk might have been
taken out while working.
3. Ingredients might have been added
too quickly.
• Stop operation
• Remove liquid from milk jug.
• Place the frothing whisk inside the
milk jug before turning on the milk
frother.
• Refill the milk jug with liquid.
•Start frothing.
• Add ingredients (if desired) slowly
and in small quantities after milk has
already started frothing.
1
PROBLEM !
2
2
2
Milk Frother cannot be
turned on!
Milk is not foaming!
Milk is not heating!
Frothing whisk is not moving
or is dislodged!
POSSIBLE CAUSE & SOLUTION
15

WARRANTY AND DISCLAIMER FOR PRODUCTS
Auspure Kitchen products are designed and manufactured to the highest quality
standards. Your milk frother is covered for parts and labour for 2 years, which includes
1 year standard warranty and 1-additional year upon registration (free of charge within
14 days) from the date of purchasing.
This warranty and disclaimer applies to all products purchased via the website
www.auspure.com/au (hereinafter “Products”) or a third party seller authorised by
Auspure.
Note: When the product is purchased from an authorised third party seller, for
warranty claim, return and replacement of a defective product, the inquiry
should be lodged via the related third party seller.
(1) Warranty Against Defects
1.1 For Brand-new Products:
We provide a 12-month standard warranty against defects with the Products, from
the date of purchase.
We provide an optional additional free 12-month extended warranty against defects
with the Products (resulting in a 24-month warranty against defects with the
Products, from the date of purchase).
In order to claim the additional 12-month extended warranty, you must register your
Product (free of charge) online at www.auspure.com/au, within 14 days of the date of
purchase. While registration, make sure that the related data entry including the date
of purchasing are accurate.
Auspure Kitchen Advanced Cafe Milk Frother
AusFroth-06
1-Year Standard Warranty
1-Year extendable warranty by simply registering to
www.auspure.com/au within 14-day of original purchase
......./......./......
Product Name
Model
Default Warranty
Additional Warranty
Purchasing Date
Order Number
Purchasing Store
16

In the event of a defect with the Product, you may be entitled to have the Product
replaced In order to be entitled to a replacement Product, you must:
-immediately stop using the Product; and
-notify us of the defect during the warranty period.
In order to claim a replacement Product, you must contact us using the details at the
CUSTOMER SUPPORT section, to notify us of the defect, providing your proof of
purchase and warranty registration confirmation as well as your contact details.
You may either:
-return the product for our further investigation; or
-send us a video of the defective Product, which demonstrates to our reasonable
satisfaction that the Product is defective and undertake to safely dispose the
defective Product. For safety reasons you must not continue to use the defective Product.
Upon receipt of the defective Product, or a video of the defective Product, we will
inspect it. If the defect is the result of a manufacturer fault, we will determine if the
fault requires a replacement or repair and either send you a replacement Product or
effect a repair.
This warranty against defects is in addition to any other rights and remedies to which
you may be entitled under Australian law.
To Clarify:
What is covered by the warranty:
•The repair or replacement of your Auspure product (at Auspure’s discretion) if the
product is found to be defective due to faulty manufacture. Auspure reserves the
right to determine if the fault requires a replacement or repair.
•Packaging and instructions of a faulty product may also be replaced if damaged.
•This warranty is valid for using your personal use of your device within Australia only.
What is not covered by the warranty:
•Using the products for commercial purposes, or anything other than normal
domestic personal use.
•Use of the product outside Australia.
•Accidental damage or faults caused by negligence, misuse, vandalism or neglect.
•Damage or faults caused by not following the instructions in the user manual.
•Unsupervised use by children under the age of 18.
•Repairs or alterations carried out by parties other than Auspure or an authorised agent.
•Any other conditions not listed above, are not covered by Auspure warranty.
17

1.2 For Renew Products:
A renew Product, which is purchased from a seller that is authorised by Auspure, is
only covered under six months warranty and is not eligible for the free warranty
extension.
1.3 For Replacements:
Replacement of a brand-new Product is only covered by the one-year standard
warranty from the date of replacement arrangement and is not eligible for the
one-additional year free warranty extension.
Replacement of a renew Product that is purchased from a seller and is authorised by
Auspure is only covered by six months warranty from the date of replacement arrangement
and is not eligible for the free warranty extension.
(2) Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable
quality and the failure does not amount to a major failure.
(3) Disclaimer
You are solely responsible for evaluating the Product and determining whether it is fit
for your purpose.
You acknowledge and agree that Product is not safe for use by children.
You acknowledge and agree that working with the Product is dangerous and carries
the risk of electric shock, burns, lacerations, other injuries and death.
You acknowledge that you use the Product at your own risk and that you are responsi-
ble at all times for evaluating whether or not it is safe to use the Product.
(4) Limitation of Liability
In addition to the requirements set out in clause 1 of this warranty and disclaimer
document, the warranty provided under that clause will not apply:
-if a defect with the Product results in any way from some act or omission by you in
relation to the appropriate care, maintenance and/or use of the Product; or
-if a defect with the Product results from ordinary wear and tear; or
-if you fail to follow our or the manufacturer’s instructions for care, maintenance
and/or use of the Product; or
-if you are unable to provide proof of purchase.
18

Except as otherwise provided by law, we accept no liability for any loss, damage or
injury which may arise in any way from the use of the Product by you or by any other
person.
Except as otherwise provided in this warranty and disclaimer, to the maximum extent
permitted by law, we exclude all conditions and warranties implied by custom, law or
statute, and we expressly disclaim all warranties of any kind including but not limited to
implied warranties that the Product is fit for a particular purpose.
You hereby agree that we are not liable for any direct, indirect, consequential or inciden-
tal loss or damage which may result from your use of the Product.
Except as otherwise provided by law or as otherwise set out in this warranty and
disclaimer, our liability to you shall be limited to the cost of replacement of the Product,
together with your reasonable costs of postage and/or delivery in connection with your
returning of the Product.
(5) Indemnity
You agree to defend, indemnify and hold us and our officers, directors, employees,
contractors, members, agents and licensees harmless from and against any and all
claims, charges, actions, liabilities, investigations, demands and similar including but
not limited to any costs, losses, damages whether direct, indirect, consequential or
special and all legal fees resulting from your use of the Product, including but not limited
to any third party claims.
19

DEFECTIVE PRODUCTS AND RETURNS
Proved defective product meeting the specified warranty period, should be contacted
Customer Support via [email protected] addressing your order number. Make
sure to NOT dispose of your product before contacting us. Once our Customer Support
Team has reached to your request approval, please return the unit with its order
number.
AUSPURE CUSTOMER SUPPORT
Feel free to contact our helpful customer support team with any questions regarding
your product!
Your satisfaction is our priority.
Ausbrilliant. PO Box 2, Ermington NSW 1700, Australia
www.auspure.com/au
[e-mail]
Please provide your order number when you contact our customer support services.
20