RHENINGHAUS BETA BN 300 SBR User manual

MANUAL VERTICAL SLICER
BELT DRIVEN/CLEAR SLICE EXIT
Model
BETA BN 300/350 SBR
1234
SLICERS WITH EXPERIENCE
FEATURES
Two available sizes: with 300 mm or 350 mm blade.
Anodized aluminium casting construction: sturdy and light
weight.
High quality hardened chromium steel alloy blade.
Powerful and noiseless motor.
Insulated electric controls with safety No Volt Release.
Multygrip belt drive: always the right grip.
Carriage smooth glide motion.
Stainless steel ball-bearing blade pulley.
Equipped with SBR (Safe Blade Removal) (pict.1, 2).
Wide receiving stainless steel tray, removable for cleaning
purposes (pict. 3).
Built-in sharpener, removable for cleaning purposes (pict. 4).
DESCRIPTION
BETA BN is a vertical meat slicer with clear slice exit
design.
It is possible to cut slices of thickness up to 30 mm.
Thin carpaccio or thick steaks become an easy job
with Beta.
Easy and safe cleaning after 10 hours of hard work.
Ideal machine for butcher shops, supermarkets and
large size kitchens.
CLEAR SLICE EXIT DESIGN
The entire area behind the blade is completely free:
no obstacles at the slice exit,
wide slice collection area,
attractive style.
FOOD PREPARATION MACHINES

made in italy · eu
www.rheninghaus.com
MANUAL VERTICAL SLICER
Model BETA BN 300/350 SBR
Model name Blade mm Power Hp/kW Drive Cut Capacity mm Cut thick. mm Net weight kg
BETA BN 300 SBR 300 0,35/0,25 BELT 270x205 205 30 35
BETA BN 350 SBR 350 0,35/0,25 BELT 270x230 230 30 36
All voltages and frequencies are available on request.
SPECIFICATIONS AND SHIPPING INFORMATION
AVAILABLE OPTIONALS
SHIPPING
Dimension Weight
cm 83x73x71 43 kg
cm 83x73x71 44 kg
Serrated blade for
frozen food cutting.
Non stick coated blade, perfect
for cheese and fish cutting.
Already included in
QuanTanium® configuration.
No obstacles at the slice exit
Wide slice collection area
High protection
against humidity
Powerful and
noiseless motor
Sturdy construction
for precise slices
STANDARD OUTFIT
FOOD PREPARATION MACHINES
SLICERS WITH EXPERIENCE
IMPORTANTE IMPORTANT IMPORTANTE
Lubricate sliding bars at
least once a month
Lubrificare le barredi corsa
almeno una volta al mese
Lubrique las barras correderas
almenos una vez por mes
Always unplug machine before
cleaning
Scollegare semprela macchina
prima della pulizia
Antes de efectuar la limpieza
desconecte siempre la máquina
Read operating instructions before
using machine
Prima di utilizzare l’affettatrice
leggere il manuale di istruzione
Antes de utilizar la cortadora,
lea el manual de instrucciones
Do not turn machine on unless
all guards arein place
Prima di accendere la macchina
accertarsi che tutte le protezioni
siano al loro posto
Antes de encender la máquina,
cercióresede que todas las
protecciones estén insertadas
Clean the slicer at least
once a day
Pulire la affettatricealmeno
una volta al giorno
Limpie la cortadora almenos
una vez por día
Do not feed food by hand:
always use food pusher
Non spingere il prodotto
al taglio manualmente:
utilizzare sempreil pressatore
No empuje manualmente el
producto que desea cortar:
utilice siempre el prensador
Sharpen the blade at least
once a week
Affilarela lama almeno
una volta alla settimana
Afile la cuchilla almenos
una vez por semana
Always electrically ground
the machine
Verificaresempre la messa
a terra della macchina
Verifiquesiempre la puesta
a tierra de la máquina
Keep out of children
Tenerelontano dalla portata
dei bambini
Mantenga la cortadora lejos
del alcance de los niños
Keep machine away from water:
avoid water jets during cleaning
Tenerela macchina lontano
dall’acqua: evitare getti d’acqua
durante la pulizia
Mantenga la máquina lejos del
agua: evite chorros de agua
durante la limpieza
DA ESPORRE
SULLA PARETE
VICINO
ALL’AFFETTATRICE
ATTAC H
TO WALL
NEAR SLICER
COLGAR A LA
PARED CERCA DE
LA CORTADORA
GB
I
E
GB
I
E
GB
I
E
GB
I
E
GB
I
E
GB
I
E
GB
I
E
GB
I
E
GB
I
E
GB
I
E
User Manual,
CE compliance
declaration
and “TEN
BASIC RULES”
Cardboard.
SBR quick
release disc.
FAST CLEANER
detergent,
Cleaning nylon
brush, Oiler.
DIMENSIONS
Large product
holder for great
cut capacity
AVAILABLE CONFIGURATIONS
ANODYZED
All external aluminium parts
are silver anodyzed:
TRADITIONAL SILVER FINISHING.
BASIC QUANTANIUM
Gauge plate, blade and blade
cover disc are non-stick coated.
Remaining aluminium parts are
anodyzed: CHEESE CUTTING IS
NO MORE A PROBLEM.
QuanTanium® with Titanium
particles reinforced three-layer-
non-stick coating will allow:
smoothness: difficult products
like cheese or fresh meat do
not stick and products slide
smoothly and frictionless;
higher resistance to abrasion;
resistance to most aggressive
detergents.
ES (Energy saver):
drastically reduces
power consumption.
555 Ø 350
510
840
350
690
640
515 Ø 300