Austin Hughes Cyberview LS-120 Series User manual

User Manual
W-119 / WS-119 Series
L-120 / LS-120 Series
- 1U 20" LCD keyboard drawer
- Resolution up to 1600 x 1200
- Full range KVM options
- 1U widescreen 19" LCD keyboard drawer
- Resolution up to 1440 x 900
- Full range KVM options

Chapter 1 Getting Started
1.1 Important Safeguards..........................................................1
1.2 Regulatory Notice................................................................2
1.3 Package Contents...............................................................3
1.4 Before Installation...............................................................4
1.5 Unpacking...........................................................................4
1.6 OptionalAccessories...........................................................4
1.7 Peripheral Products.............................................................5
1.8 Structure Diagram...............................................................6
1.9 Installation.....................................................................7-12
1.10 How to Use the Slide........................................................13
1.11 How to Use LCD Keyboard Drawer..................................14
1.12 LS-120 / WS-119 (Single console)
- Use CB-6 to connect to server via USB interface..........................15
1.13 LS-120 / WS-119 (Single console)
- Use CB-6 to connect to KVM via USB interface............................15
1.14 L-120 / W-119 (Single console)
- Use CE-6 to connect to server via PS/2 interface.........................16
1.15 L-120 / W-119 (Single console)
- Use CE-6 to connect to KVM via PS/2 interface..........................16
1.16 L-120 / W-119 (Single console)
- Use CE-6 to connect to server via USB interface...........................17
1.17 L-120 / W-119 (Single console)
- Use CE-6 to connect to KVM via USB interface............................17
Chapter 2 Operation
2.1 On-screen Display Operation............................................18
2.2 On-screen Menu...............................................................19
Chapter 3 Standard Specification
3.1 Specifications..............................................................20-21
3.2 Keyboard & Mouse......................................................22-24
3.3 How to Use “NS” Keyboard...............................................25
Contents

Contents
Chapter 4 Optional Specification
4.1 KVM Options.....................................................................26
4.2 DVI-D Input Option...........................................................26
4.3 BNC+S-VideoOption........................................................26
4.4 Audio Option.....................................................................27
4.5 DC power Options............................................................28
Chapter 5 Troubleshooting...........................................................29
Chapter 6 Dimensions.......................................................................30

Blank page

1.1 Important Safeguards Chapter 1
P. 1
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modifi-
cation, or failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.

P. 2
1.2 Regulatory Notice Chapter 1
Legal Information
First English printing, October 2002
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the
correctness of the contents. The information in this document is subject to change without notice. We are not
liable for any injury or loss that results from the use of this equipment.
Safety Instructions
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned enviro-
nment with temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and
causing damage to other equipment or injury to persons nearby.
■When the drawer is in an open position, do not cover, block or in any way obstruct the gap between it and
the power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage
and current labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be
higher than the one listed on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent
being damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to
the power supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equip-
ment and invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service
personnel.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equip-
ment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

1.3 Package Contents Chapter 1
P. 3
LCD keyboard drawer x 1 pc
CB-6 USB 2-in-1 KVM cable x 1 pc (for LS / WS series) or
CE-6 Combo 4-in-1 KVM cable x 1 pc (for L / W series)
User manual x 1 pc
Power cord x 1 pc
Auto switch power adapter ( for external power version) x 1 pc
Mounting bracket x 2 pcs
M6*15mm screw x 8 pcs
M3.2*6mm screw x 4 pcs
5
4
2
6
1
3
7
User
Manual
1
5
4
3
2
or
6
7
8
8

■It is very important to locate the LCD Keyboard Drawer in a suitable environment.
■The surface for placing and fixing the LCD Keyboard Drawer should be stable and level or mounted into a suitable
cabinet.
■Make sure the place has good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat,
water, moisture and vibration.
■Position LCD Keyboard Drawer with respect to related facilities.
The LCD keyboard drawer comes with the standard parts shown on the package contents. Check and make sure they
are included and in good condition. If anything is missing, or damage, contact the supplier immediately.
1.5 Unpacking
1.4 Before Installation Chapter 1
P. 4
1.6 Optional Accessories
1. Combo 4-in-1 KVM cable
1.1 CE-6 6 feet
1.2 CE-10 10 feet
1.3 CE-15 15 feet
2. USB 2-in-1 KVM cable
2.1 CB-6 6 feet
2.2 CB-10 10 feet
2.3 CB-15 15 feet
3. Power Cord
3.1 IEC power cord
3.2 NEMA 5-15 power cord (US)
3.3 BS 1363 power cord (UK)
3.4 CEE 7/4 power cord (German)
3.5 AS 3112 power cord (Australia)
Remarks :
■CB-6 is for “LS” & “WS” series only.

P. 5
1.7 Peripheral Products Chapter 1
Remarks :
■“LS” & “WS” Series are for Matrix & Combo KVM only.
Item Model No. Description
Matrix Cat6 KVM
MU-1602 / MU-1603 / MU-1604
MU-IP1613 / MU-IP1614 / MU-IP1624
MU-3202 / MU-3203 / MU-3204
MU-IP3213 / MU-IP3214 / MU-IP3224
Matrix Cat6 16 port KVM
Matrix IP Cat6 16 port KVM
Matrix Cat6 32 port KVM
Matrix IP Cat6 32 port KVM
Matrix DB-15 KVM
M-802 / M-803 / M-804
M-IP813 / M-IP814 / M-IP824
M-1602 / M-1603 / M-1604
M-IP1613 / M-IP1614 / M-IP1624
Matrix DB-15 8 port KVM
Matrix IP DB-15 8 port KVM
Matrix DB-15 16 port KVM
Matrix IP DB-15 16 port KVM
Combo Cat6 KVM
U-801 / U-802 / U-IP802
U-1601 / U-1602 / U-IP1602
U-3201 / U-3202 / U-IP3202
Combo Cat6 8 port KVM
Combo Cat6 16 port KVM
Combo Cat6 32 port KVM
Combo DB-15 KVM CV-S801 / CV-802 / IP-802
CV-S1601 / CV-1602 / IP-1602
Combo DB-15 8 port KVM
Combo DB-15 16 port KVM
PS/2 DB-15 KVM CV-401 / CV-801 / CV-1601 4 / 8 / 16 port PS/2 DB-15 KVM

1.8 Structure Diagram Chapter 1
Carry handle to release the 2-pt lock
2-point lock
LCD interchangeable module kit
LCD membrane
“One Man” Installation Slide
1
3
2
4
3
5
6
6
7
7
8
8
Micro switch for screen auto power off
Membrane switch (KVM option)
Keyboard interchangeable module kit
2 buttons mouse interchangeable module kit
1
2
9
4
5
9
P. 6
W / WS series
Carry handle to release the 2-pt lock
2-point lock
LCD interchangeable module kit
LCD membrane
“One Man” Installation Slides
1
3
2
4
3
5
6
6
7
7
8
8
Micro switch for screen auto power off
Membrane switch (KVM option)
Keyboard interchangeable module kit
Mouse interchangeable module kit
1
2
9
4
5
9
L / LS series