Austin Hughes CyberView F1417 User manual

UM-CV-751-F1417-Q423V1 www.austin-hughes.com
Designed and manufactured by Austin Hughes 751
User Manual 17″FHD LCD
dedicated KVM switch and rackmount screen technology
F1417
1U Ultra short depth LCD Console Drawer
Ultra short depth
400mm / 15.7″
Options :
- SDI
- DVI-D / DP
- DC power

UM-CV-751-F1417-Q423V1 www.austin-hughes.com
Legal Information
First English printing, October 2023
Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness
of the contents. The information in this document is subject to change without notice. We are not liable for any injury or
loss that results from the use of this equipment.
Safety Instructions
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
■Unplug equipment before cleaning. Don’t use liquid or spray detergent; use a moist cloth.
■Keep equipment away from excessive humidity and heat. Preferably, keep it in an air-conditioned environment with
temperatures not exceeding 40º Celsius (104º Fahrenheit).
■When installing, place the equipment on a sturdy, level surface to prevent it from accidentally falling and causing
damage to other equipment or injury to persons nearby.
■When the equipment is in an open position, do not cover, block or in any way obstruct the gap between it and the
power supply. Proper air convection is necessary to keep it from overheating.
■Arrange the equipment’s power cord in such a way that others won’t trip or fall over it.
■If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the voltage and current
labeled on the equipment’s electrical ratings label. The voltage rating on the cord should be higher than the one listed
on the equipment’s ratings label.
■Observe all precautions and warnings attached to the equipment.
■If you don’t intend on using the equipment for a long time, disconnect it from the power outlet to prevent being
damaged by transient over-voltage.
■Keep all liquids away from the equipment to minimize the risk of accidental spillage. Liquid spilled on to the power
supply or on other hardware may cause damage, fire or electrical shock.
■Only qualified service personnel should open the chassis. Opening it yourself could damage the equipment and
invalidate its warranty.
■If any part of the equipment becomes damaged or stops functioning, have it checked by qualified service personnel.
What the warranty does not cover
■Any product, on which the serial number has been defaced, modified or removed.
■Damage, deterioration or malfunction resulting from:
□Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or
failure to follow instructions supplied with the product.
□Repair or attempted repair by anyone not authorized by us.
□Any damage of the product due to shipment.
□Removal or installation of the product.
□Causes external to the product, such as electric power fluctuation or failure.
□Use of supplies or parts not meeting our specifications.
□Normal wear and tear.
□Any other causes which does not relate to a product defect.
■Removal, installation, and set-up service charges.
Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment offand on, the
user is encouraged to try to correct the interference by one or more of the following measures:
■Re-position or relocate the receiving antenna.
■Increase the separation between the equipment and receiver.
■Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

UM-CV-751-F1417-Q423V1 www.austin-hughes.com
Contents
< Part. 1 > F1417
1.1 Package Content P.1
1.2 Structure Diagram & Dimension P.1
1.3 Installation P.3
1.4 Connection P.5
< Part. 2 > Specifications / OSD
2.1 Product Specifications P.7
2.2 Keyboard / Mouse Specifications P.9
2.3 On-screen Display Operation ( OSD ) P.11
< Part. 3 > Options
3.1 3G / HD / SD-SDI Broadcast-grade input P.13
3.2 Speaker, Display port, DVI-D, BNC P.14
3.3 F17″Touchscreen : Projected Capacitive ( 10-point touch )
Resistive 1-point touch P.15
3.4 DC Power : 12V / 24V / 48V / 125V / 250V P.17
< Part. 4 > KVM Integration
4.1 F1417 P.18

UM-CV-751-F1417-Q423V1 www.austin-hughes.com
■It is very important to mount the equipment in a suitable cabinet or on a stable surface.
■Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
The equipment comes with the standard parts shown in package content. Check and make sure they are
included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Unpacking
Before Installation
How To Clean Your LCD Monitor
Caution :
■To avoid the risk of electric shock, make sure your hands are dry before unplugging your monitor from or
plugging your monitor into an electrical outlet.
■When you clean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your display. Pressure damage is not covered under warranty.
■Use only cleansers made specifically for cleaning monitors and monitor screens. Cleansers not made to
clean monitors and monitor screens can scratch the LCD display or strip offthe finish.
■Do not spray any kind of liquid directly onto the screen or case of your monitor. Spraying liquids directly
onto the screen or case can cause damage which is not covered under warranty.
■Do not use paper towels or abrasive pads to clean your monitor. Using an abrasive pad or any wood based
paper product such as paper towels can scratch your LCD screen.
Cleaning Your Monitor
To clean your LCD safely, please follow these steps :
Disconnect the power cord.
Gently wipe the surface using a clean, dry microfiber cloth. Use as little pressure as possible.
1
2
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, please follow these steps :
Disconnect the power cord.
Spray a small amount of non-abrasive cleanser on a microfiber cloth.
Gently wipe the surface. Use as little pressure as possible.
Wait until your monitor is completely dry before plugging it in and powering it up.
1
2
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
4

UM-CV-751-F1417-Q423V1 www.austin-hughes.com
Intentionally
Left
Blank

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 1
< 1.1 > Package Content
< Part 1 >
The above package content is only for the single console models.
It varies with options such as KVM, SDI, DVI-D, Touchscreen & DC power.
< 1.2 > Structure Diagram
4
3
1LCD interchangeable module kit
Installation Slides
Molded front handle
Audio speaker ( optional )
LCD membrane
2
8
9
7
6
5
Micro switch for screen auto power off
Keyboard interchangeable module kit
Mouse interchangeable module kit
Front USB port for device access
( USB Hub KVM only )
- CX-6B 6ft HDMI console cable X 1
( Alternative : CB-6A 6ft VGA console cable )
- 2.5A Power adapter & Power cord X 1
- M6 screw, cage nut & cup washer X 8
9
6
4
5
8
2
1
3
7

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 2
F1417
Side View
Top View
Front View
The weight is only for the single console models. It varies with accessories & options
such as KVM, SDI, DVI-D & DC power.
UNIT : mm
1mm = 0.03937 inch
Model Product Dimension
(W x D x H)
Packing Dimension
(W x D x H) Net Weight Gross Weight
F1417 441.6 x 400 x 44 mm
17.4 x 15.7 x 1.73 inch
590 x 617 x 120 mm
23.2 x 24.3 x 4.7 inch
9.8 kg
21.6 lb
14.8 kg
32.6 lb
< 1.2 > Dimension
Rear View
Power VGAUSB
+12 VDC
HDMI

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 3
< 1.3 > Installation - Installation Slides
■Fix the LCD console drawer into the rack.
Complete the installation
Step 3
■Insert the left and right rear mounting brackets into
the LCD console drawer.
Step 1
Step 2
■Measure the depth of the front and rear mounting rails.
■Align each rear mounting bracket to a suitable length.
M6 screw, cage nut & cup washer x 8 are provided.

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 4
F1417< 1.3 > Installation - How to use the drawer
■Operate the LCD console drawer.
■Flip up the LCD to a suitable angle.
■Press the handle button and gently slide out
the drawer.
After use the drawer
Basically, user can push in the drawer back to park position by releasing the
left & right slide lock arrow (as long as the drawer starts moving, he/she can
release their finger right away, holding the arrow is not necessary).
Keep Your Fingers
Away From The Slide Stop

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 5
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning offthe power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
< 1.4 > Connection to USB Server via CX-6B cable
USB server
POWER
LCD Console Drawer
CX-6B HDMI
console cable
HDMI
HDMI
HDMI
USB
USB
USB
< 1.4 > Connection to external KVM via CX-6B cable
LCD Console Drawer
CX-6B HDMI
console cable
POWER
4K HDMI KVM
12345678
Mouse USB HubKeyboard
Video
+12 VDC
+12 VDC

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 6
F1417
Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such
as the servers and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while
servers and KVM are powered on may cause irreversible damage to the servers, KVM and LCD
console drawer. Before attempting to connect anything to the LCD console drawer, we suggest
turning offthe power to all devices. Apply power to connected devices again only after the LCD
console drawer is receiving power. The company is not responsible for damage caused in this way.
< 1.4 > Connection to external KVM via CB-6A cable
VGA console KVM
LCD Console Drawer
USB VGA
POWER
USB server
LCD Console Drawer
CB-6A VGA
console cable
CB-6A VGA
console cable
VGAUSB
< 1.4 > Connection to USB Server via CB-6A cable
HDMI
HDMI
USB
USB
POWER
+12 VDC
+12 VDC

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 7
Power Power Supply Range Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption for
Single Console Screen ON Max. 14W
Power saving mode Max. 2W
Power button OFF Max. 1W
Power Consumption
with KVM integration Screen ON Max. 45W
Power saving mode Max. 34W
* For details, please refer to our KVM rear kit user manuals
< 2.1 > Product Specifications
LCD
Panel F1417
Native Resolution 1920 x 1080
Panel Size ( diagonal ) 17.3"
Brightness ( cd/m² ) 400
Contrast Ratio ( typ. ) 600:1
Colors 16.7 M, 8-bit
Viewing Angle ( L/R/U/D ) 85/85/85/85
Response Time ( ms ) 5.5
Dot pitch ( mm ) 0.1989
Display Area ( mm ) 381.888H x 214.812V
Surface treatment Anti-glare, Hard-coating
Surface hardness 3H
Backlight Type LED
MTBF ( hrs ) 50,000
< Part 2 >
Video
Connectivity
Digital HDMI HDMI 1.4, HDCP 1.4
DVI DVI-D, TMDS single link
Display Port DP 1.0 / HDCP 1.3
Analog VGA Analog 0.7Vp-p
Composite ( BNC ) NTSC & PAL
Plug & Play DVI / VGA VESA EDID structure 1.3
Synchronization VGA Separate, Composite & SOG
Environmental
Conditions
Operating Temperature 0 to 55°C degree
Humidity 10~90%, non-condensing
Altitude 16,000 ft
Storage /
Non-operating
Temperature -20 to 60°C degree
Humidity 5~90%, non-condensing
Altitude 40,000 ft
Shock 10G acceleration (11ms duration)
Vibration 10~300Hz 0.5G RMS random
Compliance EMC FCC & CE
Safety CE / LVD & UKCA
Environmental RoHS3 & REACH / WEEE

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 8
F1417
Physical
Specification F1417
Product ( W x D x H ) 441.6 x 400 x 44 mm
17.4 x 15.7 x 1.73 inch
Packing ( W x D x H ) 590 x 617 x 120 mm
23.2 x 24.3 x 4.7 inch
Net Weight 9.8 kg / 21.6 lb
Gross Weight 14.8 kg / 32.6 lb
* All dimensions stated are subject to change if options are selected / integrated to base model part codes
Applicable
Format
DVI-D / VGA Input PC Signal 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
720 x 400 x 70Hz
640 x 480 x 60Hz
Audio Signal 2ch Linear PCM
HDMI Input PC Signal Same as VGA
HDMI 1.4 1920 x 1080 x 50 / 60Hz ( 1080p )
1920 x 1080 x 25 / 30Hz ( 1080i )
1280 x 720 x 50 / 60Hz ( 720p )
720 x 480 x 50 / 60Hz ( 576p / 480p )
Audio Signal 2ch Linear PCM
Display port Input PC Signal 1920 x 1080 x 60Hz
1680 x 1050 x 60Hz
1440 x 900 x 60Hz
1360 x 768 x 60Hz
1280 x 1024 x 60Hz
1280 x 768 x 60Hz
1280 x 720 x 60Hz
1152 x 864 x 60Hz
1024 x 768 x 60Hz
800 x 600 x 60Hz
720 x 400 x 70Hz
640 x 480 x 60Hz
Audio Signal 2ch Linear PCM

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 9
Key force 55 ± 5g
Travelling distance 3 ± 0.3mm
Switch life > 10 million life cycle time
OS support Windows / Linux / Unix / Mac OS
< 2.2 > Standard Keyboard / Mouse Specifications
G keyboard integrated with trackball
Gb
G keyboard integrated with touchpad
Ge
Supporting layouts
America
United States
EMEA
United Kingdom Germany France Russia Spain Italy
Asia
Japan Korea

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP.10
F1417
Audio / Display Keys * Please ask your supplier for full details
F9
Audio : Mute
Display : Degauss
F11
Audio : Decrease volume
Display : Decrease contrast
F12
Audio : Increase volume
Display : Increase contrast
< 2.2 > SUN Keyboard / Mouse Options
Num LED in Green mode
Key pad behaves as a normal key
pad mode
■Incorporates SUN keys, including Stop, Cut, Paste, Compose, Copy and Help
■104 key notepad keyboard with full numerical pad and SUN function
■USB interface
■US layout only
S keyboard integrated with touchpad / trackball
Num LED in Offmode
Key pad behaves as a SUN Solar
system administration command mode
How to Use "S" Keyboard
S keyboard integrated with trackball
Sb
S keyboard integrated with touchpad
Se
Num Cap s Scro ll Comp ose Num Cap s Scro ll Comp ose

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP. 11
< 2.3 > On-screen Display Operation ( OSD )
Exit the OSD screen
Toggle analog, digital & video connection (DVI-D and video options only)
Scrolls through menu options and adjusts the displayed control
(To auto adjustment by pressing the button for 5 seconds)
Display the OSD menu
Power on / offLCD
Power light
Green = On
Orange = Power saving
Membrane Switch Function
Select another video input (only available for models with multiple video input) :
( a ) Press the button to call up the on-screen video mode on top right corner.
( b ) Use up/down arrow to the select the video input
( c ) Press the button to confirm the selection
Picture
Brightness : Adjust the screen brightness
Contrast : Adjust the difference between the image background
( black level ) and the foreground ( white level )
Black level : Adjust background black level of the screen
Eco : Screen in power saving mode
1
Position
H-Position : To adjust the horizontal position of the video
V-Position : To adjust the vertical position of the video
Clock : To auto adjust H. Size of the screen
Phase : To fine tune the screen.
Picture size : FULL SCREEEN / 4:3 / 5:4 / 16:10
2

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP.12
F1417On-screen Display Operation ( OSD )
OSD Set
Language : Select the language in which the OSD menu is
displayed - English
OSD H-Position : Align the screen image left or right
OSD V-Position : Align the screen image up or down
OSD time out : Adjust the screen timeout
OSD transparency : Adjust the screen transparency
OSD rotation : Rotate the screen - 90° / 180° / 270°
4
Reset
Reset : Return the adjustment back to factory setting
5
Color
Color temperature : User / Warm / Cool / 5400k mode and
Red / Green / Blue color balance
Sharpness : Adjust the image from weak to sharp
Hue : Adjust the screen hue value
Saturation : Adjust the saturation of the image color
Dynamic
luminous control : Control the dynamic brightness
3
6
MISC
Signal source : Select the signal source - DP / HDMI1 / HDMI2
Mute : Turn offthe surrounding sound
Audio in : Auto / Line in / DP
Volume : Adjust the volume of sound
Sleep mode : Set the offtime - 10 min / 20 min / 30 min /
50 min / 60 min / 120 min / 240 min

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP.13
< Part 3 >
< 3.1 > Options : 3G / HD / SD-SDI input
INPUT 3G-SDI IN BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT BNC x 1 / Active through, equalized & relocked
Standard Compliance Video SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio SMPTE 299M / 272M-C
Compatible Audio Format 3G-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI 48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Compatible Video Format 3G-SDI 1080p
1080p
1080i
720p
@60 / 50Hz, 4:2:2
@30 / 25 / 24Hz, 4:4:4
@60 / 50Hz, 4:4:4
@60 / 50Hz, 4:4:4
HD-SDI 1080p
1080i
720p
@30 / 25 / 24Hz, 4:2:2
@60 / 50Hz, 4:2:2
@60 / 50Hz, 4:2:2
SD-SDI 480i @60Hz, 4:2:2
ITU-R BT.656 576i @50Hz, 4:2:2
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI 150m at 2.97Gb/s
HD-SDI 250m at 1.485Gb/s
SD-SDI 480m at 270Mb/s
SDI
out - in
+12 VDC
Austin Hughes’ SDI input is an ideal solution for the broadcast-
grade video and high resolution CCTV market.
Designed for use with CyberView displays, a SDI input
module can support up to 1080p @60Hz resolution without
using additional space or power and it comes standard with a
2-year warranty.
* SDI option comes with speakers.

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP.14
F1417< 3.2 > Options :
DP Option
- Display Port ( DP 1.0, HDCP 1.3 )
- Speaker
+12 VDC
DP
speaker
speaker
Speaker Option
+12 VDC
DVI-D Option
- DVI-D ( DVI-D, TMDS single link )
- Audio input & output ( for F117 only )
- Speaker DVI-D
BNC Option
- BNC ( Composite, BNC )
- Audio IN
- Speaker
+12 VDC
Audio INBNC

UM-CV-751-F1417-Q423V1 www.austin-hughes.comP.15
< 3.3 > Options : Touchscreen & driver
Model TRB e-Resistive
Technology 5-Wire Resistive
Touch Point Single
Input Type Finger or Stylus
Resolution 2048 x 2048
Response Speed 15 ms
Activation Force ≤50 g
Surface Hardness 3H
Light Transmission 80% ± 3%
Haze 8% ± 3%
Durability 10 million touches
Top Layer ITO Film
Bottom Layer ITO Glass
Thickness 2.2 ± 0.2 mm
Connector USB Type A
Compatibility Windows 7 / XP / Vista, Linux
■USB touchscreen package includes 1 x 6ft USB cable, quick reference guideline and CD disc
■For detailed information, please refer to the attached CD disc
■As the touchscreen unit is not made of toughened glass, please handle it carefully
Resistive Touch screen Specification
Capacitive Touch screen Specification
Model TPC-10 Multi-touch
Technology Projected Capacitive
Touch Point 10
Input Type Finger or Capacitive Stylus
Resolution 4096 x 4096
Touch Point Accuracy ± 2 mm
Response Speed < 5 ms
Activation Force < 5 g
Surface Hardness 6H
Light Transmission > 85%
Haze 3% ↓
Durability 50 million touches
Top Layer 1.8 mm Glass
Bottom Layer 0.7 mm Sensor Glass
Thickness 2.7 ± 0.1 mm
Connector USB
Compatibility Linux / Android / Windows / Mac