AUSTRALIAN MONITOR AMC120 User manual

SPECIFICATIONS
Power output:
120W
Outputs:
4 Ohms, 70/100V
THD before clipping
0.5%
Inputs
3x (Mic/Aux)
Input connectors
3x (XLR/RCA)
Mic sensitivity
1mV+/-0.2mV
AUX sensitivity
0.5V+/-100mV
S/N ratio
> 80dBr
Bandwidth
On 70V terminals
75Hz-15kHz
(-3dB +0dB)
Tone Controls
Bass @ 100Hz
+/- 12 dB
Treble @ 10kHz
+/- 9 dB
Power source (Switchable)
115V 60 Hz
230-240V 50Hz
Current draw (full power)
2.5 A
Fuses
1A - AC mains & DC
Line Out
1V
Tape Out
300mV
Mic 1 Automatic
Priority over Mic2/3
Size
19” W x 3.5” H x 11.1” D
Protections
1) Short circuit
2) Thermal at 95%
Output Regulation
96%
Net Weight
23.1lb
Shipping Dimensions
20.1” W x 5.7” H x 11.7” D
Shipping Weight
27.6 lb
•3 balanced XLR mic/dual RCA line inputs
•120 watt output power
•2 Rack units in height
•70 volt or 4 ohm operation
•Master treble and bass control
•Channel 1 has priority over channels 2 & 3 (defeatable)
•Facility to add a tone generator module
•Tape output (pre master)
•Balanced line output
The Australian Monitor Installation Series AMC line of amplifiers
takes the heritage & reliability of our famous AMIS series &
integrates these features into a low cost amplifier format for
applications where reliability is everything, but the more elaborate
features of our AMIS series are not required. The 120 watt
version of the AMC series is a 2 RU mixer amplifier featuring 70
volt line (100v 230/240V version) & 4 ohm outputs & 3 universal
mic/line inputs.
Master volume & overall treble/bass controls are provided, along
with Voice triggered muting (defeatable) giving channel 1 priority
over inputs 2 & 3. There is also facility to internally add & a tone
generator card. Protection includes short circuit and thermal
detection and shut-down.
The Australian Monitor AMC series give the contractor a low cost
alternative in applications that are cost sensitive, but still require a
high quality of sound reproduction & reliability.
AMC 120AMC 120
AMC 120AMC 120
AMC 120
120 Watt 2RU MIXER-AMPLIFIER

70 Voltage cable run distances-to-cable type
50m AWG18
50m-200m AWG13
Over 200m AWG10
4 Ohm cable run distances-to-cable type
10m AWG18
10m-30m AWG13
Over 30m Not recommnded
AMC 120AMC 120
AMC 120AMC 120
AMC 120
ABOUT
Australian Monitor
Corporate Headquarters
is located in Sydney,
Australia. The
organization has more
than 20 years experience
in the design and
manufacture of audio
amplifiers and
associated products.
They are a dynamic
corporation, priding
themselves on excellent
customer service, better
features and lower priced
products for Sound
Contractors and Audio
Visual Integrators
worldwide.