Austro Engine E4 Series User manual

Installation Manual
E4 Series
E4.02.01
IM-TR-MDC-E4-618
Issue Date: 08-Jan-2021
IM-TR –New OPS and FPS Sensors
AEP-00284-901
COVERPAGE
TEMPORARY REVISION
IM-TR-MDC-E4-618
New OPS and FPS Sensors AEP-00284-901
This Temporary Revision IM-TR-MDC-E4-618 is approved in conjunction with the
Design Change Advisory MDC-E4-618a and is valid in conjunction with the latest
revision of the Maintenance Manual (IM) until this Temporary Revision has been
incorporated into the IM.
The limitations and information contained herein either supplement or, in the case of
conflict, override those in the IM.
The technical information contained in this document has been approved under the
authority of DOA ref. EASA.21J.399.
Doc. Nr.
Affected Section(s)
Affected Page(s)
E4.02.01
14.4
14-4a
Instruction:
-Print this document on yellow paper (single-sided)
-Insert this cover page as the first page of the IM
-Insert the other pages of this Temporary Revision adjacent to or in front of the
corresponding IM pages

Installation Manual
E4 Series
E4.02.01
IM-TR-MDC-E4-618
Issue Date: 08-Jan-2021
IM-TR –New OPS and FPS Sensors
AEP-00284-901
14-4a
14.4 Mounting of Additional Shielding for Fuel Pressure Sensor
The following note is added in the beginning of this section:
Additional Shielding is not required for FPS AEP-00284-901.