AUTLED LC-009-000 User manual
DMX Wireless Transceiver - User Manual
Item no.: LC-009-000
1. Product Information
The DMX512 is a powerful wireless transceiver, which transmits the standard DMX512 protocol
in the form of wireless transmission, replacing the long-time used cable transmission, no time
delay in the process of data transmission, real-time and reliable, using 2,4G global open ISM
frequency. It can be one emitter and one receiver, or several receivers (supporting piont to point,
point to multipoint), one emitter configurate several receivers, as long as the receiver and emit-
ter set the same frequency. It is widely adapts the DMX512 controller manufactured by various
suppliers. Total of 126 channels, it can be used in the same place individually of 126 groups of
wireless network and none mutual interference.
2. Specification
Input Voltage 5-36VDC
Transmission Signal DMX512/1990
Transmitting Power 20dBm
Receive Sensitivity -96dBm
Distance bis zu 350 Meter
Operating Frequency 2.4GHz ISM 126 Frequenzskalierungen
Product Dimensions (L x W x H in mm) 176 x 46 x 30mm
Weight 155g
3. Basic Features
1. Adapts 2.4G global open ISM frequency, license free, high efficient GFSK modulation.
2. Adapts to the international standard DMX512 protocol.
3. One emitter configurate several receivers, as long as the receiver and emitter set the
same frequency.
4. Total of 126 channels, it can be used in the sameplace individually of 126 groups of wireless
network and none nutual interference
5. There are 4 levels of the transmitted power. At the max transmitted power (20dBm), Visual
communication distance is upto 350 meters.
4. Safety warnings
4.1. Please don‘t install this controller in lightening, intense magnetic and high-voltage fields.
4.2. To reduce the risk of component damage and fire caused by short circuit, make sure
correct connection
4.3. Always be sure to mount this unit in an area that will allow proper ventilation to ensure a
fitting temperature.
4.4. Check if the voltage and power adapter suit the controller (please select DC5-24V power
supply with constant voltage)
4.5. Don‘t connect cables with power on, make sure a correct connection and no short circuit
checked with instrument before power on.
4.6. Please don‘t open controller cover and operate if problems occur. The manual is only suitab-
le for this model, any update is subject to change without prior notice.
4. Operating Instructions
No. Frequenz
1
2
4
3
10
9
6
5
8
7
1
2
8
4
32
16
64
126 channels frequency option
Example:
set the working frqeuency in 52. Put the DIP switch „3, 5 and 6“
to „1“, the rests are „0“, now the total value of DIP switch 1-7 is
4+16+32, that is the DMX512 wireless transceiver frquency 52.
Remark
Set the controller as emitter or receiver „DIP SWITCH „1“ as the emitter mode,
and „0“ as receiver mode)
Choose the transmit power setting: 00 as 5 dBm, 01 as 10 dBm, 10 as 15 dBm,
11 as 20 dBm (Maximum 20 dBm)
6. It has a self-test mode for the situation when the wireless link quality test or engineering
installation debugging is needed.
7. If further distance is needed, it can be used as relay setting, relay once or many times in order
to achieve the required distance.
8. Multi-usage, can be set as a receiver or emitter, convenient to use.
9. Wrong wiring protection at signal input port.
5. Dimensions
6. Conjunction Diagram
7. System Diagram
Malfunction Reasons Solutions
No signal received
1. not Power on 1. check the power wiring
2. wire the power + - not correct 2. correct wiring to + and -
3. wrong frequeny used 3. choose the correct frequency with the
Jumpers as per emitter
no singal emit 1. emitter mode not used 1. set the emitter mode with the jumper
8 to switch „1“
not enough
transmit distance
1. wrong transmit power used 1. set the correct transmit power
8. Exception handles
various DMX equipments
various DMX equipments
various DMX equipments
Relay
2.4G wireless trans-
mission can be one to
multiple
