TE-TFT
UTP to ST Transceiver for Fiber Optic Cable
IEEE 802.3 10BaseT, 10BaseFL standard
Fiber segment supports up to 2Km
Built-In standard ST connectors and can use multiple fiber
size 50/125, 62/125, and 100/140m m
Eliminates the cross-over cable by providing DTE and
MPR ports
Supports Full-Duplex
Extensive diagnostic LEDs
5 Year Warranty
FEATURES
PRODUCT INFORMATION
TE-T2: AUI-to-BNC Transceiver
TE-TT: AUI-to-RJ-45 Transceiver
TE-TF: AUI-to-ST Transceiver
TE-TFT: UTP to ST Transceiver
for Fiber Optic Cable
TE-TC: BNC-to-UTP Transceiver
To Order Please Call:
1-888-326-6061
ORDERING INFORMATIONORDERING INFORMATION
SPECIFICATIONS
Standards:
IEEE802.3 10BaseT, 10BaseFL
Protocol:
CSMA/CD
Interface:
RJ-45: UTP 100 Ohm Cat.3, 4, 5
ST: 50/125m , 62.5/125m , 100/140m micro multi-mode fiber
LED Indicators:
Power, collision, jabber, FL Link/Act, TP Link/Act
Maximum Segment Length:
Twisted Pair: 100M
10BaseFL 2000M
Temperature:
0° C ~ 70° C (standard operation)
Humidity:
10% to 90% (Non condensing)
External Power Supply:
Input rate 100V/220V AC, 50~60Hz
Output rate: 5V DC
Certifications:
FCC Class A, CE; UL, TUV
•
•
•
•
•
•
•
•
•
•
•
•
TE-TFT (11-17-2002)
U
L
R
TRENDnet
TRENDware, USA
What's Next in Networking
TRENDnet is a registered treademark of TRENDware International, Inc. Other Brands and product names are trademarks of their respective holders. Information provided in this
document pertain to TRENDware products and is subject to change at any time, without notice. For the most recent product information please visit
____________________
http://www.TRENDNET.com.
©
Copyright TRENDware International, Inc. 2004. All Rights Reserved.
TRENDware International, Inc.
3135 Kashiwa Street
Torrance, CA. 90505. USA
Tel: 310-891-1100
Fax: 310-891-1111
Web:
www.TRENDNET.com
