
MAINTENANCE
Perform visual inspections every fifty cycles of utilization.
Lubrication elements of mechanical function every six months with high viscosity
lubricant.
Checking of tightness of binding elements of every three months. Proceed to ajust if
necessary.
C610 –ORTOPHEDIC FOLDABLE WHEELCHAIR in“X”
The orthopaedic foldable wheelchair is an Equipment of manual drive, developed
to be used as a transport in places of difficult access. This chair as for main purpose
the transport of patients with reduced mobility. This product is developed and
produced by Auto Ribeiro Lda..
OPERATING MODE / UTILIZATION
1º - Press the safety red lever and apply load of chair
headboard as shown the picture beside.
2º - Pull the two sidebars slightly upwards so as to
overcome the jam zone.
3º - Hold the frame with both hands in the zones
indicated and lift the seat by applying a slight load on
the direction of the arrows.
4º - The Chair will take this aspect when fully closed.