AutoDab GO+ Operation manual

What’s in the pack?
• GO+ DAB/DAB+ Receiver
• Active Glass Mount Antenna
• Power Cable
• Windscreen / Dash mount system

How to t?
1. Remove all content from the AutoDAB GO+ Box
2. Position the antenna in the top right of the front windscreen, approx. 150mm from the
top (top left for right hand drive vehicles). The antenna should be located parallel to the
A-pillar of the car. We recommend that it is held in position with a temporary x until you
conrm that you have a good reception.
3. Plug the cigarette lighter charger into
the nearest 12V supply.
4. Fix the AutoDAB GO+ bracket to the
windscreen or dashboard and connect
the antenna and power as shown below.
5. The AutoDAB GO+ has an optional
Digital Quality Audio Out socket (labelled
AUX OUT).

Getting Started- PLAY
1) Scan – selection of scan will cause the device
to scan to see what stations are available to you.
A simple progress bar will keep you informed of pro-
gress but normally a scan will be quite quick. At the end of the
scan your GO+ will tell you how many stations were found.
The 1st menu has 4 options as follows;
2) Stations – A list of stations available to you
will be displayed either alphabetically if ‘list
mode’ selected from settings or by ensemble if
‘ensemble mode’ selected. Selection of ensemble will help
you quickly nd your desired station.
• Simply touch your desired station to select it and it will start
playing and display in the play screen.

4) Settings
The settings button allows you to customise your
AutoDAB GO+. We recommend that this function
is not used whilst driving as it could cause distraction.
You can;
• Select the mode of station display, either ensemble or list mode
• Change the colour of the app to suit your taste
• Adjust Day Dimmer & Night Dimmer settings
• Adjust Volume settings
3) Favourites
this button stores a list of your favourite stations.
You can add or delete items by pressing the icon
on your station listings, storing up to 10.

The PLAY Screen
The play screen is the screen which will be viewed the
majority of the time. It has the following features;
1. Displays the station name
2. Displays the DLS transmitted by the station
including artist and song title
3. The signal strength of the station at that point in time
4. Any slide-show pictures transmitted by the station.
5. Touch here to select previous station
6. Touch here to select next station
7. Touch screen here to select day or night mode

The AutoDAB Go+ will automatically transmit at 87.5 MHz. Tune the car radio to this frequency. Choose a preset
on the car radio and store the AutoDAB GO+ frequency to it. To change the AutoDAB GO+ transmit frequency
go to the settings menu.
Note: Do not change the FM frequency unless necessary and avoid conict with local transmitting radio station
frequencies.
FM Modulation