AutomationDirect C-more EA9-T6CL-R Instructions for use

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Hardware User Manual
EA9-USER-M
®


~WARNING ~
Thank you for purchasing automation equipment from Automationdirect.com®, doing business as,
AutomationDirect. We want your new automation equipment to operate safely. Anyone who installs or
uses this equipment should read this publication (and any other relevant publications) before installing or
operating the equipment.
To minimize the risk of potential safety problems, you should follow all applicable local and national
codes that regulate the installation and operation of your equipment. These codes vary from area to area
and usually change with time. It is your responsibility to determine which codes should be followed, and
to verify that the equipment, installation, and operation is in compliance with the latest revision of these
codes.
At a minimum, you should follow all applicable sections of the National Fire Code, National Electrical
Code, and the codes of the National Electrical Manufacturer’s Association (NEMA). There may be local
regulatory or government offices that can also help determine which codes and standards are necessary for
safe installation and operation.
Equipment damage or serious injury to personnel can result from the failure to follow all applicable
codes and standards. We do not guarantee the products described in this publication are suitable for
your particular application, nor do we assume any responsibility for your product design, installation, or
operation.
Our products are not fault-tolerant and are not designed, manufactured or intended for use or resale as
on-line control equipment in hazardous environments requiring fail-safe performance, such as in the
operation of nuclear facilities, aircraft navigation or communication systems, air traffic control, direct life
support machines, or weapons systems, in which the failure of the product could lead directly to death,
personal injury, or severe physical or environmental damage (“High Risk Activities”). AutomationDirect
specifically disclaims any expressed or implied warranty of fitness for High Risk Activities.
For additional warranty and safety information, see the Terms and Conditions section of our catalog.
If you have any questions concerning the installation or operation of this equipment, or if you need
additional information, please call us at 770-844-4200.
This publication is based on information that was available at the time it was printed. At
AutomationDirect we constantly strive to improve our products and services, so we reserve the right to
make changes to the products and/or publications at any time without notice and without any obligation.
This publication may also discuss features that may not be available in certain revisions of the product.
Trademarks
This publication may contain references to products produced and/or offered by other companies. The
product and company names may be trademarked and are the sole property of their respective owners.
AutomationDirect disclaims any proprietary interest in the marks and names of others.
Copyright 2020, Automationdirect.com®Incorporated
All Rights Reserved
No part of this manual shall be copied, reproduced, or transmitted in any way without the prior, written
consent of Automationdirect.com®Incorporated. AutomationDirect retains the exclusive rights to all
information included in this document.

~ADVERTENCIA ~
Gracias por comprar equipo de automatización de Automationdirect.com®. Deseamos que su nuevo equipo de
automatización opere de manera segura. Cualquier persona que instale o use este equipo debe leer esta publicación
(y cualquier otra publicación pertinente) antes de instalar u operar el equipo.
Para reducir al mínimo el riesgo debido a problemas de seguridad, debe seguir todos los códigos de seguridad
locales o nacionales aplicables que regulan la instalación y operación de su equipo. Estos códigos varian de área
en área y usualmente cambian con el tiempo. Es su responsabilidad determinar cuales códigos deben ser seguidos
y verificar que el equipo, instalación y operación estén en cumplimiento con la revisión mas reciente de estos
códigos.
Como mínimo, debe seguir las secciones aplicables del Código Nacional de Incendio, Código Nacional Eléctrico,
y los códigos de (NEMA) la Asociación Nacional de Fabricantes Eléctricos de USA. Puede haber oficinas de
normas locales o del gobierno que pueden ayudar a determinar cuales códigos y normas son necesarios para una
instalación y operación segura.
Si no se siguen todos los códigos y normas aplicables, puede resultar en daños al equipo o lesiones serias a personas.
No garantizamos los productos descritos en esta publicación para ser adecuados para su aplicación en particular, ni
asumimos ninguna responsabilidad por el diseño de su producto, la instalación u operación.
Nuestros productos no son tolerantes a fallas y no han sido diseñados, fabricados o intencionados para uso o
reventa como equipo de control en línea en ambientes peligrosos que requieren una ejecución sin fallas, tales
como operación en instalaciones nucleares, sistemas de navegación aérea, o de comunicación, control de
tráfico aéreo, máquinas de soporte de vida o sistemas de armamentos en las cuales la falla del producto puede
resultar directamente en muerte, heridas personales, o daños físicos o ambientales severos (“Actividades de Alto
Riesgo”). Automationdirect.com específicamente rechaza cualquier garantía ya sea expresada o implicada para
actividades de alto riesgo. Para
información adicional acerca de garantía e información de seguridad, vea la sección de Términos y Condiciones de
nuestro catálogo. Si tiene alguna pregunta sobre instalación u operación de este equipo, o si necesita información
adicional, por favor llámenos al número 770-844-4200 en Estados Unidos. Esta publicación está basada en la
información disponible al momento de impresión. En Automationdirect.com nos esforzamos constantemente
para mejorar nuestros productos y servicios, así que nos reservamos el derecho de hacer cambios al producto y/o
a las publicaciones en cualquier momento sin notificación y sin ninguna obligación. Esta publicación también
puede discutir características que no estén disponibles en ciertas revisiones del producto.
Marcas Registradas
Esta publicación puede contener referencias a productos producidos y/u ofrecidos por otras compañías. Los nombres de las compañías y
productos pueden tener marcas registradas y son propiedad única de sus respectivos dueños. Automationdirect.com, renuncia cualquier
interés propietario en las marcas y nombres de otros.
PROPIEDAD LITERARIA 2020, AUTOMATIONDIRECT.COM®INCORPORATED
Todos los derechos reservados
No se permite copiar, reproducir, o transmitir de ninguna forma ninguna parte de este manual sin previo consentimiento por escrito
de Automationdirect.com®Incorprated. Automationdirect.com retiene los derechos exclusivos a toda la información incluida en
este documento. Los usuarios de este equipo pueden copiar este documento solamente para instalar, configurar y mantener el equipo
correspondiente. También las instituciones de enseñanza pueden usar este manual para propósitos educativos.

~ AVERTISSEMENT ~
Nous vous remercions d’avoir acheté l’équipement d’automatisation de Automationdirect.com®, en faisant des affaires
comme, AutomationDirect. Nous tenons à ce que votre nouvel équipement d’automatisation fonctionne en toute
sécurité. Toute personne qui installe ou utilise cet équipement doit lire la présente publication (et toutes les autres
publications pertinentes) avant de l’installer ou de l’utiliser.
Afin de réduire au minimum le risque d’éventuels problèmes de sécurité, vous devez respecter tous les codes locaux
et nationaux applicables régissant l’installation et le fonctionnement de votre équipement. Ces codes diffèrent d’une
région à l’autre et, habituellement, évoluent au fil du temps. Il vous incombe de déterminer les codes à respecter et de
vous assurer que l’équipement, l’installation et le fonctionnement sont conformes aux exigences de la version la plus
récente de ces codes.
Vous devez, à tout le moins, respecter toutes les sections applicables du Code national de prévention des incendies,
du Code national de l’électricité et des codes de la National Electrical Manufacturer’s Association (NEMA). Des
organismes de réglementation ou des services gouvernementaux locaux peuvent également vous aider à déterminer les
codes ainsi que les normes à respecter pour assurer une installation et un fonctionnement sûrs.
L’omission de respecter la totalité des codes et des normes applicables peut entraîner des dommages à l’équipement
ou causer de graves blessures au personnel. Nous ne garantissons pas que les produits décrits dans cette publication
conviennent à votre application particulière et nous n’assumons aucune responsabilité à l’égard de la conception, de
l’installation ou du fonctionnement de votre produit.
Nos produits ne sont pas insensibles aux défaillances et ne sont ni conçus ni fabriqués pour l’utilisation ou la revente en
tant qu’équipement de commande en ligne dans des environnements dangereux nécessitant une sécurité absolue, par
exemple, l’exploitation d’installations nucléaires, les systèmes de navigation aérienne ou de communication, le contrôle
de la circulation aérienne, les équipements de survie ou les systèmes d’armes, pour lesquels la défaillance du produit
peut provoquer la mort, des blessures corporelles ou de graves dommages matériels ou environnementaux («activités à
risque élevé»). La société AutomationDirect nie toute garantie expresse ou implicite d’aptitude à l’emploi en ce qui a
trait aux activités à risque élevé.
Pour des renseignements additionnels touchant la garantie et la sécurité, veuillez consulter la section Modalités et
conditions de notre documentation. Si vous avez des questions au sujet de l’installation ou du fonctionnement de cet
équipement, ou encore si vous avez besoin de renseignements supplémentaires, n’hésitez pas à nous téléphoner au
770-844-4200.
Cette publication s’appuie sur l’information qui était disponible au moment de l’impression. À la société
AutomationDirect, nous nous efforçons constamment d’améliorer nos produits et services. C’est pourquoi nous nous
réservons le droit d’apporter des modifications aux produits ou aux publications en tout temps, sans préavis ni quelque
obligation que ce soit. La présente publication peut aussi porter sur des caractéristiques susceptibles de ne pas être
offertes dans certaines versions révisées du produit.
Marques de commerce
La présente publication peut contenir des références à des produits fabriqués ou offerts par d’autres entreprises. Les
désignations des produits et des entreprises peuvent être des marques de commerce et appartiennent exclusivement à
leurs propriétaires respectifs. AutomationDirect nie tout intérêt dans les autres marques et désignations.
Copyright 2020, Automationdirect.com®Incorporated
Tous droits réservés
Nulle partie de ce manuel ne doit être copiée, reproduite ou transmise de quelque façon que ce soit sans le
consentement préalable écrit de la société Automationdirect.com®Incorporated. AutomationDirect conserve les
droits exclusifs à l’égard de tous les renseignements contenus dans le présent document.


HARDWARE USER MANUAL
Please include the Manual Number and the Manual Issue, both shown below,
when communicating with Technical Support regarding this publication.
Manual Number: EA9-USER-M
Issue: 1st Edition Revision K
Issue Date: 01/20
Publication History
Issue Date Description of Changes
First Edition 03/14 Original
1st Ed. Rev. A 10/14 Minor Revisions
1st Ed. Rev. B 01/15 Revised PLC communication and drivers, minor revisions
1st Ed. Rev. C 03/16 Added Recovery Tool and No System Found to Troubleshooting, minor revisions
1st Ed. Rev. D 12/16 Added EA9-T7CL(-R). Added Appendix C, minor revisions
1st Ed. Rev. E11/17Added EA9-T10WCL and EA9-T15CL-R. Minor revisions
1st Ed. Rev. F 02/18 Revised Memory Device Formatting table
1st Ed. Rev. G 08/18 Corrected DH485-CBL description
1st Ed. Rev. H 08/19 Added Micro-800 series. Minor revisions
1st Ed. Rev. J 09/19 Minor Revisions
1st Ed. Rev. K 01/20 Added S7-1500
®


Table of ConTenTs
Chapter 1: Getting Started
Introduction...................................................................................................................1-2
The Purpose of this Manual������������������������������������������������������������������������������������������1-2
Supplemental Manuals �������������������������������������������������������������������������������������������������1-2
Technical Support ��������������������������������������������������������������������������������������������������������1-2
Conventions Used..........................................................................................................1-3
Key Topics for Each Chapter�����������������������������������������������������������������������������������������1-3
Product Overview ..........................................................................................................1-4
Quick Start Steps ...........................................................................................................1-5
Step 1 – Unpack and Inspect����������������������������������������������������������������������������������������1-5
Step 2 – Install Optional Hardware Accessories�������������������������������������������������������������1-6
Step 3 – Become Familiar with Available Communication Ports������������������������������������1-7
Step 4 – Install the Programming Software and Develop a Project �������������������������������1-8
Step 5 – Connect Touch Panel to Computer ����������������������������������������������������������������1-9
Step 6 – Provide Power to the Touch Panel����������������������������������������������������������������1-10
Step 7 – Access the Touch Panel Setup Screens����������������������������������������������������������1-12
Step 8 – Choose Touch Panel to Device Cables����������������������������������������������������������1-13
Step 9 – Connect Touch Panel to PLC������������������������������������������������������������������������1-16
Chapter 2: Specifications
Available Models............................................................................................................2-4
Model Specifications .....................................................................................................2-5
Specifications common to all models ���������������������������������������������������������������������������2-6
6-inch Models ��������������������������������������������������������������������������������������������������������������2-7
7-inch Models ��������������������������������������������������������������������������������������������������������������2-8
8-inch and 10-inch Models ������������������������������������������������������������������������������������������2-9
12-inch and 15-inch Models ��������������������������������������������������������������������������������������2-10

Table of Contents
ii ®EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
EA9-T6CL-R, EA9-T6CL............................................................................................... 2-11
Dimensions, Inches [mm]����������������������������������������������������������������������������������������� 2-11
Ports and Memory Expansion����������������������������������������������������������������������������������� 2-12
EA9-T7CL-R, EA9-T7CL............................................................................................... 2-13
Dimensions, Inches [mm]����������������������������������������������������������������������������������������� 2-13
Ports and Memory Expansion����������������������������������������������������������������������������������� 2-14
EA9-T8CL.................................................................................................................... 2-15
Dimensions, Inches [mm]����������������������������������������������������������������������������������������� 2-15
Ports and Memory Expansion����������������������������������������������������������������������������������� 2-16
EA9-T10CL.................................................................................................................. 2-17
Dimensions, Inches [mm]����������������������������������������������������������������������������������������� 2-17
EA9-T10WCL .............................................................................................................. 2-18
Dimensions, Inches [mm]����������������������������������������������������������������������������������������� 2-18
Ports and Memory Expansion����������������������������������������������������������������������������������� 2-19
EA9-T12CL.................................................................................................................. 2-20
Dimensions, Inches [mm]����������������������������������������������������������������������������������������� 2-20
Ports and Memory Expansion����������������������������������������������������������������������������������� 2-21
EA9-T15CL-R, EA9-T15CL........................................................................................... 2-22
Dimensions, Inches [mm]����������������������������������������������������������������������������������������� 2-22
Ports and Memory Expansion����������������������������������������������������������������������������������� 2-23
Mounting Clearances ................................................................................................ 2-25
EA9-T15CL-R, EA9-T15CL Derating �������������������������������������������������������������������������� 2-26
Communications Ports .............................................................................................. 2-27
Handling External Memory Devices.......................................................................... 2-30
Writing to External Memory Devices ������������������������������������������������������������������������ 2-30
Memory Device Formatting�������������������������������������������������������������������������������������� 2-30
Minimizing Data Errors��������������������������������������������������������������������������������������������� 2-31
Monitoring Available Memory ��������������������������������������������������������������������������������� 2-31
File Name Limitations����������������������������������������������������������������������������������������������� 2-32
Power Loss Retention ����������������������������������������������������������������������������������������������� 2-32
Chemical Compatibility ............................................................................................. 2-32

Table of Contents
iii
®
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Chapter 3: Accessories
Accessories Overview................................................................................................... 3-2
AC/DC Power Adapter ................................................................................................ 3-3
AC/DC Power Adapter Dimensions ���������������������������������������������������������������������������� 3-5
AC/DC Power Adapter Installation������������������������������������������������������������������������������ 3-6
EA-ECOM Ethernet Communication Module.............................................................. 3-7
D-SUB 15-pin to Terminal Block Adapters.................................................................. 3-8
Non-glare Screen Covers............................................................................................. 3-9
Clear Screen Overlay Installation ������������������������������������������������������������������������������ 3-10
SD Card...................................................................................................................... 3-11
USB FLASH Drive ....................................................................................................... 3-11
Chapter 4: Installation and Wiring
Safety Guidelines ......................................................................................................... 4-2
Introduction................................................................................................................. 4-3
EA9-T6CL-R, EA9-T6CL, EA9-T7CL-R and EA9-T7CL
Cutout Dimensions ...................................................................................................... 4-4
EA9-T8CL and EA9-T10WCL Cutout Dimensions........................................................ 4-5
EA9-T12CL Cutout Dimensions ................................................................................... 4-7
EA9-T15CL-R and EA9-T15CL Cutout Dimensions ...................................................... 4-8
Mounting Clearances .................................................................................................. 4-9
EA9-T15CL-R, EA9-T15CL Derating �������������������������������������������������������������������������� 4-10
Wiring Guidelines ...................................................................................................... 4-11
Agency Approvals����������������������������������������������������������������������������������������������������� 4-11
Providing Power to the Touch Panel ������������������������������������������������������������������������ 4-12
C-more LED Status Indicators ����������������������������������������������������������������������������������� 4-13
Chapter 5: System Setup Screens
Introduction................................................................................................................. 5-2
Accessing the System Setup Screens (no project loaded) ......................................... 5-3
Accessing the System Setup Screens (with project loaded) ...................................... 5-4
System Setup Screens – Enable Password in Software .............................................. 5-6

Table of Contents
iv ®EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
System Setup Screens Flowchart .............................................................................. 5-12
Main Menu................................................................................................................. 5-13
Information Menu ..................................................................................................... 5-14
Setting Menu ............................................................................................................. 5-18
Test Menu .................................................................................................................. 5-25
Memory Menu ........................................................................................................... 5-34
Chapter 6: PLC Communications
Introduction................................................................................................................. 6-2
DirectLOGIC PLCs Password Protection...................................................................... 6-2
PLC Protocols ������������������������������������������������������������������������������������������������������������� 6-3
PLC Communication Cables & Wiring Diagrams........................................................ 6-5
AutomationDirect PLCs RS-232C Serial����������������������������������������������������������������������� 6-7
AutomationDirect PLCs RS-422A/RS-485A���������������������������������������������������������������� 6-10
DirectLOGIC Universal Isolated Network Adapter, p/n FA-ISOCON: ������������������������ 6-16
DirectLOGIC Universal Converter, p/n F2-UNICON: ������������������������������������������������ 6-17
RS-422A/RS-485A Multi-Drop Wiring Diagram Examples ����������������������������������������� 6-18
Allen-Bradley ������������������������������������������������������������������������������������������������������������ 6-22
GE���������������������������������������������������������������������������������������������������������������������������� 6-27
GE VersaMax Micro�������������������������������������������������������������������������������������������������� 6-27
Mitsubishi����������������������������������������������������������������������������������������������������������������� 6-28
Omron ��������������������������������������������������������������������������������������������������������������������� 6-30
Modicon Modbus RS-232����������������������������������������������������������������������������������������� 6-31
Modicon Micro Series����������������������������������������������������������������������������������������������� 6-31
Modicon Modbus with RJ45������������������������������������������������������������������������������������� 6-31
Siemens�������������������������������������������������������������������������������������������������������������������� 6-32
Chapter 7: Maintenance
Project Backup ����������������������������������������������������������������������������������������������������������� 7-2
Check Operating Environment ����������������������������������������������������������������������������������� 7-2
Check Operating Voltage ������������������������������������������������������������������������������������������� 7-2
Check Status Indicators ���������������������������������������������������������������������������������������������� 7-2
Check Physical Conditions������������������������������������������������������������������������������������������ 7-3
Run Tests under System Setup Screens����������������������������������������������������������������������� 7-3

Table of Contents
v
®
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Check Memory Usage ������������������������������������������������������������������������������������������������ 7-4
Check/Adjust Display Brightness��������������������������������������������������������������������������������� 7-4
Check Error Log �������������������������������������������������������������������������������������������������������� 7-4
Adjust Touch Panel����������������������������������������������������������������������������������������������������� 7-4
Cleaning the Display Screen��������������������������������������������������������������������������������������� 7-5
Check Project Functionality ���������������������������������������������������������������������������������������� 7-6
Checks from C-more Programming Software ������������������������������������������������������������� 7-6
Notes:........................................................................................................................... 7-7
Chapter 8: Troubleshooting
Common Problems ���������������������������������������������������������������������������������������������������� 8-2
Troubleshooting Flow Chart��������������������������������������������������������������������������������������� 8-3
Touch Panel does not Power up��������������������������������������������������������������������������������� 8-4
Display is Blank ���������������������������������������������������������������������������������������������������������� 8-5
Display is Dim ������������������������������������������������������������������������������������������������������������ 8-6
No User Program ������������������������������������������������������������������������������������������������������� 8-7
Firmware Recovery Tool ��������������������������������������������������������������������������������������������� 8-8
No System Found������������������������������������������������������������������������������������������������������� 8-9
No Communications between Panel and PC (Personal Computer) via USB �������������� 8-10
USB Driver Troubleshooting ������������������������������������������������������������������������������������� 8-12
No Communications between Panel and PC (Personal Computer) via Ethernet ������� 8-14
No Communications between Panel and PLC ���������������������������������������������������������� 8-18
IP Address in System Setup Screens displays 0�0�0�0 ������������������������������������������������ 8-21
Difficulty Connecting to the Panel over the Internet (Web server and Remote Access
features) ������������������������������������������������������������������������������������������������������������������� 8-22
PLC Protocol Error Codes ����������������������������������������������������������������������������������������� 8-23
Touch Panel Runtime Errors ������������������������������������������������������������������������������������� 8-24
Panel Constantly Displays “Initializing” when Powering up �������������������������������������� 8-25
Data not Logging Problems ������������������������������������������������������������������������������������� 8-25
Electrical Noise Problems������������������������������������������������������������������������������������������ 8-26
Chapter 9: Replacement Parts
Replacement Parts Overview ...................................................................................... 9-2
Panel Mounting Clip Replacements – EA9-BRK.......................................................... 9-3
Logo Label Replacement Insert - EA9-LBL .................................................................. 9-4

Table of Contents
vi ®EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
3-wire Communications Terminal Block – EA9-3TB.................................................... 9-5
DC Panel Power Connector Replacement – EA-DC-CON ........................................... 9-5
AC Power Adapter Connector Replacement– EA-AC-CON......................................... 9-6
Panel Gasket Replacements – EA9-xx-GSK ................................................................. 9-7
Gasket Replacement Installation Instructions: ........................................................... 9-7
Appendix A: Panel and PLC Error Code Tables
Introduction.................................................................................................................A-2
C-more Touch Panel Error Code Table .......................................................................A-3
DirectLOGIC – Panel Error Code PLC-499 Explanation ..............................................A-5
DirectLOGIC K-Sequence Protocol – PLC Error Code Table.......................................A-5
DirectLOGIC DirectNET Protocol – PLC Error Codes ..................................................A-5
Modbus Protocols Error Code P499 Explanation .......................................................A-6
AutomationDirect CLICK �������������������������������������������������������������������������������������������� A-6
AutomationDirect DirectLOGIC - Modbus (Koyo)�������������������������������������������������������A-6
Modicon Modbus RTU �����������������������������������������������������������������������������������������������A-6
Entivity Modbus RTU�������������������������������������������������������������������������������������������������� A-6
DirectLOGIC ECOM Protocol – PLC Error Codes ........................................................A-6
Productivity Error Code P499......................................................................................A-7
AutomationDirect Do-More Error Codes....................................................................A-8
Allen-Bradley – Panel Error Code PLC-499 Explanation .............................................A-9
Allen-Bradley DF1 & DH485 Protocols – PLC Error Code Tables .............................A-10
Allen-Bradley EtherNet/IP Protocol –
Panel Error Code PLC-496, 497 and 498 Explanation ..............................................A-12
Allen-Bradley – EtherNet/IP Protocol – PLC Error Code Tables ControlLogix,
CompactLogix, & FlexLogix.......................................................................................A-13
Allen-Bradley – Micro800 Serial and EtherNet/IP Tag Based PLC Error Code Tables
...................................................................................................................................A-17
Allen-Bradley – EtherNet/IP Protocol – PLC Error Code Tables...............................A-21
Generic EtherNet IP Protocol – PLC Error Codes .....................................................A-26
GE 90-30 – Panel Error Code PLC-499 Explanation..................................................A-27

Table of Contents
vii
®
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
GE 90-30 SNPX Protocol – PLC Error Code Tables...................................................A-28
Mitsubishi FX Protocol – PLC Error Codes................................................................A-37
Omron – Panel Error Code PLC-499 Explanation .....................................................A-37
Omron Host Link Protocol – PLC Error Code Table .................................................A-38
Omron FINS Protocol – PLC Error Code Table .........................................................A-39
Omron – Panel Error Code P495 Explanation ..........................................................A-42
Omron CS/CJ FINS Ethernet Protocol – PLC Error Code Table................................A-43
Siemens – Panel Error Code P499 Explanation.........................................................A-44
Siemens PPI Protocol – PLC Error Code Table..........................................................A-45
Siemens ISO over TCP Protocol – PLC Error Code Table .........................................A-46
Appendix B: Touch Panel Runtime Errors
Introduction.................................................................................................................B-2
Runtime Errors.............................................................................................................B-3
Log File Naming��������������������������������������������������������������������������������������������������������� B-4
Appendix C: Security Considerations for Control Systems Networks
Security Considerations for Control Systems Networks.............................................C-2


1
1
1
GettinG Started
Chapter
Chapter
Chapter
In This Chapter...
Introduction...................................................................................................................1-2
The Purpose of this Manual������������������������������������������������������������������������������������������1-2
Supplemental Manuals �������������������������������������������������������������������������������������������������1-2
Technical Support ��������������������������������������������������������������������������������������������������������1-2
Conventions Used..........................................................................................................1-3
Key Topics for Each Chapter�����������������������������������������������������������������������������������������1-3
Product Overview ..........................................................................................................1-4
Quick Start Steps ...........................................................................................................1-5
Step 1 – Unpack and Inspect����������������������������������������������������������������������������������������1-5
Step 2 – Install Optional Hardware Accessories�������������������������������������������������������������1-6
Step 3 – Become Familiar with Available Communication Ports������������������������������������1-7
Step 4 – Install the Programming Software and Develop a Project �������������������������������1-8
Step 5 – Connect Touch Panel to Computer ����������������������������������������������������������������1-9
Step 6 – Provide Power to the Touch Panel����������������������������������������������������������������1-10
Step 7 – Access the Touch Panel Setup Screens����������������������������������������������������������1-12
Step 8 – Choose Touch Panel to Device Cables����������������������������������������������������������1-13
Step 9 – Connect Touch Panel to PLC������������������������������������������������������������������������1-16

Chapter 1 - Getting Started
1-2 ®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Introduction
The Purpose of this Manual
Thank you for purchasing our C-more® Touch Panel family of products. This manual
describes AutomationDirect.com’s C-more Touch Panels, their specifications, included
components, available accessories and provides you with important information for
installation, connectivity and setup. The manual shows you how install, wire and use the
products. It also helps you understand how to interface the panels to other devices in a
control system.
This user manual contains important information for personnel who will install the touch
panels and accessories, and for the personnel who will be programming the panel. If you
understand control systems that make use of operating interfaces such as the C-more touch
panels, our user manuals will provide all the information you need to get, and keep your
system up and running.
Supplemental Manuals
If you are familiar with industrial control type devices, you may be able to get up and running
with just the aide of the Quick Start Guide that is included with each touch panel. You can
also refer to the On-line help that is available in the C-more programming software for more
information about programming the panel.
Technical Support
We strive to make our manuals the best in the industry. We rely on your feedback to let
us know if we are reaching our goal. If you cannot find the solution to your particular
application, or, if for any reason you need technical assistance, please call us at:
770–844–4200
Our technical support group will work with you to answer your questions. They are available
Monday through Friday from 9:00 A.M. to 6:00 P.M. Eastern Time. We also encourage you
to visit our web site where you can find technical and non-technical information about our
products and our company.
http://c-more.automationdirect.com

Chapter 1 - Getting Started
1-3
®
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
B
C
D
EA9-USER-M Hardware User Manual, 1st Ed. Rev. K
Conventions Used
When you see the “notepad” icon in the left-hand margin, the paragraph to its immediate right will be a special note.
The word NOTE: in boldface will mark the beginning of the text.
When you see the “exclamation mark” icon in the left-hand margin, the paragraph to its immediate
right will be a warning. This information could prevent injury, loss of property, or even death (in
extreme cases). The word Warning: in boldface will mark the beginning of the text.
Key Topics for Each Chapter
The beginning of each chapter will list the key topics
that can be found in that chapter.
Getting Started
CHAPTER
1
In This Chapter...
.................................................................1-2
...........................................................................1-4Specifications
General Information
This manual suits for next models
10
Table of contents
Other AutomationDirect Touch Panel manuals
Popular Touch Panel manuals by other brands

Samsung
Samsung HARMAN AMX VARIA-80 quick start guide

Avalue Technology
Avalue Technology ARC-1232 Quick reference guide

Avalue Technology
Avalue Technology OFP-21W38 Quick reference guide

Alula
Alula RE667 manual

Cleveland Motion Controls
Cleveland Motion Controls Cleveland-Kidder TMI instruction manual

MiTAC
MiTAC Maestro 830 user manual