Autophix ES910 User manual

ES910
BMW MINI Rolls-Royce
www.autophix.com
BMW SCANNER
USER’S MANUAL

Table of Contents
1
SAFETY PRECAUTIONS
ABOUT ES910
1. Coverage
2. Other Features & Benefits
3. Includes
4. Appearance and Key Descriptions
OPERATION INSTRUCTIONS
1. Connect ES910
2. ES910 Features
2.1 Select Brand
2.2 Basic Functions
2.2.1 Version Information
2.2.2 Read Fault Codes
2.2.3 Erase Fault Codes
2.2.4 Read Datastream
2.3.2 DME/DDE Motor(Diesel)Electronics
2.3.3 Battery management
2.3 Special Functions
2.3.1 CBS Functions
2.3.4 EPB Electronic Parking brake
2.3.5 Steering-angle sensor
2.3.6 ABS/ACS/DSC Dynamic Stability Control
2.3.7 Special case
2.4 Erase All Systems Fault Codes
3. ES910 Tool Setup
3.1 Language
3.2 Device Information
1. Limited One Year Warranty
2. Service Procedures
WARRANTY AND SERVICE
2
3
3
3
4
4
6
6
6
6
8
9
10
10
11
12
12
13
13
14
15
15
16
16
17
18
18
19
19
19

To avoid body hurt and damage to the device or your car, please read
this manual carefully before using ES910.
The general testing process described in this manual is got by
technologist’s experience. Safety precaution is required in most of the
process to avoid body hurt and damage to the device or your car.
Prior to your using this device, please read vehicle maintenance code
and follow the safety precautions. Keep mention to the following
general safety precautions.
It generates CO and other poisonous air when engine run. To avoid this
kind of hurt, please repair the car in a well-air-ventilated location.
When an engine is running, many parts (such as the coolant fan,
pulleys, fan belt etc.) turn at high speed. To avoid serious injury, always
be aware of moving parts. Keep a safe distance from these parts as well
as other potentially moving objects.
Engine parts become very hot when the engine is running. To prevent
severe burns, avoid contact with hot engine parts.
Connecting or disconnecting test equipment when the ignition is ON
can damage test equipment and the vehicle's electronic components.
Turn the ignition OFF before connecting the ES910 or disconnecting
the ES910 from the vehicle's Data Link Connector (DLC).
Fuel and battery vapors are highly flammable. To prevent an explosion,
keep all sparks, heated items and open flames away from the battery
and fuel/ fuel vapors. DO NOT SMOKE NEAR THE VEHICLE DURING
TESTING.
SAFETY PRECAUTIONS
2

3
· Dimensions: 170mm X 96.2mm X 28.8mm.
· 2.8’LCD,320 X 240 easy-to-read backlit LCD display with adjustable
contrast .
· Operating Voltage: 8V-18V.
· Operating Temperature: 0°C-60°C(32-140°F).
· Storage Temperature: -20°C-70°C(4-158°F).
· Easy to use six-button operation(UP,DOWN,LEFT,RIGHT,ENTER,EXIT).
· CE、FCC、RoHS certification.
ES910 is a handy professional Scanner for BMW vehicles. It
supports all of OBD 16PIN BMW vehicles, including BMW, MINI
and Rolls-Royce brands vehicles, fastly detects Engine, ABS,
Airbags, Auto Transmission, Instrument and other control
systems.
1) BMW /MINI / Rolls-Royce.
2) ES910 Supports most of BMW vehicles between 1998 to 2001, and
works on all models after 2001.
ABOUT ES910
2. Other Features & Benefits
1. Coverage

4
1. 1pc x ES910 Scan Tool main unit
2. 1pc x User's Manual
3. 1pc x USB update cable
4. 1pc x Durable Nylon Storage Case
3. Includes
4. Appearance and Key Descriptions
8
1
2
6
3
5
4
7

5
1. LCD DISPLAY – Indicates test results. Backlit, 320 x 240 pixel
display with contrast adjustment
2. ENTER BUTTON – Confirms a selection (or action) from a menu.
3. EXIT BUTTON – Cancels a selection (or action) from a menu or
returns to the menu.
4. LEFT SCROLL BUTTON –in the menu mode through the menu
and sub menu move to the left, when rolling in a data interface,
use the left button can be moved to the last screen text
interface
5. RIGHT SCROLL BUTTON –In the menu mode through the
menu and sub menu item move to the right, when rolling in the
data interface, use the right button can be moved to the next
screen text interface
6. UP SCROLL BUTTON –in the menu mode through the menu
and sub menu item moving up. When retrieving data for more
than a screen by moving up the screen to the previous screen for
more data
7. DOWN SCROLL BUTTON –In the menu mode through the
menu and sub menu item moves down. When retrieving data
more than one screen, by moving down the screen to the next
screen for more data.
8. OBD-16PIN CONNECTOR – Connects the scan tool to the
vehicle’s Data Link Connector (DLC).

6
1.1 Turn the ignition on.
1.2 Locate the vehicle's 16-pin Data Link Connector (DLC).
OPERATION INSTRUCTIONS
1. Connect ES910
www.autophix.com
Main Menu
Tool SetupBMW
[Tool Setup] : Language / Device Information.
[BMW] : Select Brand BMW / MINI / Rolls-Royce.
(The main interface) (Main Menu)
1.3 Main menu function：
2. ES910 Features
2.1 Select Brand
Choose [BMW] and it displays as follow：

7
Main Menu
Tool SetupBMW
MINI
Rolls Royce
BMW
1/3
Select Brand
ES910 system is divided into three parts, each separated from each
other. Click [BMW], and then press the [Enter] button. The screen will
show all BMW car series. As follows.
1 Series
2 Series
3 Series
4 Series
5 Series
6 Series
7 Series
1/10
Select Series
E81/E82/E87/E88
F20/F21
1/2
Select Chassis
For example: Choose [1-Series] and it displays as follow：

8
2.2 Basic Functions
Basic Functions
Special Functions
Erase All Systems Fault Code
1/3
Select Function
For example: Choose [E81/E82/E87/E88] and it displays as follow：
System Scan
Manual Select
1/2
Select Function
Choose [Basic Functions] and it displays as follow：
System scan is to scan all vehicle systems.
Manual selection is to display all possible systems, select one of the
systems to diagnosis.

9
CAS Car Access System
DME/DDE Digtal motor/Diesel...
EKPS Fuel-pump control
EGS Transmission control
AL Active steering
DSC Dynamic Stability Control
RDC Tyre pressure control
1/51
Select System
2.2.1 Version Information
Choose [Manual Select] and it displays as follow：
Version Information
Read Fault Codes
Erase Fault Codes
Read Datastream
1/4
Select Function
Choose [DME/DDE Digtal motor/Diesel electronics] and it displays as
follow：
VIN : LV11356
Part Number : 7542300
Coding Index : 11
Diagnosis Index : 0020
Variant Index : 3451
Hardware Number : 00
1/4
Version Information
Choose [Version Information] and it displays as follow：

10
2.2.2 Read Fault Codes
29CF Combustion misfires
Cylinder 3
1/20
Read Fault Codes
Erase fault codes!
Are you sure?
Information
Choose [Read Fault Codes]. Press up or down button to check each
fault code as follow.
2.2.3 Erase Fault Codes
Choose [Erase Fault Codes] then press [ENTER] button as follow.
You need to press [ENTER] again to clear the fault codes. Or you can
press [EXIT] button to give up clearing fault codes. It shows as follow
after clearing the fault codes.

11
Version Information
Read Fault Codes
Erase Fault Codes
Read Datastream
1/4
Select Function
All Datastream Of Page
Engine speed[rpm]
DISA potentiometer voltage[v]
Throttle opening[%]
Air - mass flow[kg/h]
1~4/86
Select Datastream
[ ]
[ ]
[ ]
[ ]
[ ]
Press [LEFT] and [RIGHT] buttons to page,
press [UP] and [DOWN] buttons to select one by one,
Press [ENTER] button to select the Datastream,
Press [EXIT] button to read Datastream.
Erase fault codes had
success.
Please wait 10 seconds, Turn
igniton off and Switch on again.
Read fault codes to verify.
Information
2.2.4 Read Datastream
Choose [Read Datastream] then press [ENTER] button as follow.

12
[CBS reset 1 ]: Engine oil, Spark plugs, Front brakes, Rear brakes,
Coolant, Diesel particle filter, Brake fluid, Microfilter, Vehicle
inspection, Exhaust emission inspection, Vehicle check.
[CBS reset 2 ]: Oil service,Inspection,Time interval,Correct follow-on
service,Display service interval status.
[CBS correction]: Engine oil, Spark plugs, Front brakes, Rear brakes,
Coolant, Diesel particle filter, Brake fluid, Microfilter, Vehicle
inspection, Exhaust emission inspection, Vehicle check.
Basic Functions
Special Functions
Erase All Systems Fault Code
1/3
Select Function
CBS function
Reset control unit
DME/DDE Motor(Diesel)Elect...
EGS Transmission control
Battery management
EPB Electronic Parking brake
Steering-angle sensor
1/8
Special Functions
2.3 Special Functions
2.3.1 CBS Functions
Choose [Special Function] and it displays as follow：
CBS reset
CBS correction
CBS Delete adaptation value...
1/3
CBS Function
Choose [CBS function] and it displays as follow：

13
Idle speed
Clear adaptations
Register battery replacement
Remove Valvetronic servomotor
Learning Valvetronic limit positions
1/5
Special Functions
CBS function
Reset control unit
DME/DDE Motor(Diesel)Elect...
EGS Transmission control
Battery management
EPB Electronic Parking brake
Steering-angle sensor
1/8
Special Functions
2.3.2 DME/DDE Motor(Diesel)Electronics
Choose [DME/DDE Motor(Diesel)Electronics] and it displays as follow：
Battery Functions
1/1
Special Functions
CBS function
Reset control unit
DME/DDE Motor(Diesel)Elect...
EGS Transmission control
Battery management
EPB Electronic Parking brake
Steering-angle sensor
1/8
Special Functions
2.3.3 Battery management
Choose [Battery management] and it displays as follow：
DME/DDE Motor(Diesel)Electronics: Idle speed/ Clear
adaptations/ Register battery replacement/ Remove Valvetronic
servomotor/ Leaming Valvetronic limit positions...
Different engine functions are some difference.

Register battery change
Evaluate battery charge state
1/2
Special Functions
2.3.4 EPB Electronic Parking brake
Choose [EPB Electronic Parking brake] and it displays as follow：
Choose [Battery Functions] and it displays as follow：
(1)
(2) What do you wish to do?
(1)Display history of battery
replacement
(2)Register battery replacement
1/2
Special Functions
For example: Choose [Register battery change] and it displays as
follow：
Press left button to scroll left part,
Press right button to scroll right part.
14

CBS function
Reset control unit
DME/DDE Motor(Diesel)Elect...
EGS Transmission control
Battery management
EPB Electronic Parking brake
Steering-angle sensor
1/8
Special Functions
Workshop mode
Startup
Parking brake: Bedding-in pro...
1/3
EPB Parking brake
15
CBS function
Reset control unit
DME/DDE Motor(Diesel)Elect...
EGS Transmission control
Battery management
EPB Electronic Parking brake
Steering-angle sensor
1/8
Special Functions
Adjustment, steering-angle sensor
1/1
Special Functions
2.3.5 Steering-angle sensor
Choose [Steering-angle sensor] and it displays as follow：
ABS/ACS/DSC Dynamic Stability...
1/8
Special Functions
Brake bleeding procedure
Mix-up check, brake lines
DSC control unit adjustment
Initialization, brake pedal ang...
Brake bleeding procedure
Brake bleeding procedure
1/8
Special Functions
2.3.6 ABS/ACS/DSC Dynamic Stability Control
Choose [ABS/ACS/DSC Dynamic Stability Control] and it displays as
follow：

OK
Delete
+
-
.
0
1
Previously
programmed value: 40
1/15
Special Functions
16
2.3.7 Special case
In special cases, you will need to enter values manually and it displays
as follow：
Note: The special features of each model are different, please
according to the actual operation.
* Rolls-Royce only supports [ CBS function ].
Press left button to scroll up and down,
Press enter button to selection.
Basic Functions
Special Functions
Erase All Systems Fault Codes
1/3
Select Function
2.4 Erase All Systems Fault Codes
Choose [Erase All Systems Fault Codes] and it displays as follow：
Erase fault codes!
Are you sure?
Information

Erase fault codes had
success.
Please wait 10 seconds, Turn
igniton off and Switch on again.
Read fault codes to verify.
Information
17
Note: It works on all BMWs after 2003.
3. ES910 Tool Setup
Choose Tool Setup and it displays as follow：
Main Menu
Tool SetupBMW
You need to press [ENTER] again to clear the fault codes. Or you can
press [EXIT] button to give up clearing fault codes. It shows as the
follow after clearing the fault codes.

English
1/8
Language
Note: Subsequent upgrade will more add language.
18
Device Information
Language
1/2
Tool Setup
3.1 Language
Choose [Language] and press [ENTER] button：
Language
1/2
Tool Setup
Device Information
3.2 Device Information
Choose [Device Information] and press [ENTER] button：

19
1. Limited One Year Warranty
This warranty is expressly limited to persons who purchase AUTOPHIX
products for purposes of resale or use in the ordinary course of the
buyer’s business.
AUTOPHIX electronic product is warranted against defects in
materials and workmanship for one year (12 months ) from date of
delivery to the user.
This warranty does not cover any part that has been abused, altered,
used for a purpose other for which it was intended, or used in a
manner inconsistent with instructions regarding use. The exclusive
remedy for any automotive meter found to be defective is repair or
replacement, and AUTOPHIX shall not be liable for any consequential
or incidental damages.
Final determination of defects shall be made by AUTOPHIX in
accordance with procedures established by AUTOPHIX. No agent,
employee, or representative of AUTOPHIX has any authority to bind
AUTOPHIX to any affirmation, representation, or warranty concerning
AUTOPHIX automotive meters, except as stated herein.
2. Service Procedures
If you have any questions, please contact your local store, distributor
or visit our website at www.autophix.com .
If it becomes necessary to return the scan tool for repair, contact your
local distributor for more information.
WARRANTY AND SERVICE