AUVIO 3300353 User manual

THE PERFORMANCE YOU NEED
®
TM
Headphones
with Remote and Mic
User’s Guide 3300353
Please read this user’s guide before using your
new headphones.
Get more from your audio and video equipment. See
what you’ve been missing. With Auvio, you control the
experience.
Auvio was established by a group of technophiles to
provide high quality audio and video products without
the high sticker price. The Auvio philosophy is for you to
experience audio and video as it was intended to be: pure
and distortion free.
We know electronics can be intimidating. Auvio simplifies
your experience by providing the right products, with the
right specs, to work with your equipment.
Be confident about your purchase: your new Auvio
product incorporates the latest technology, is built to the
highest quality standards, and reduces environmental im-
pact by complying with RoHS environmental restrictions.

2
2
Package contents
Headphones
Silicone Tips (3 sizes)
Cord Manager
Carrying Case
User’s Guide
Features
In-line remote with mic enables you to
conveniently answer calls, as well as
control the music and volume of your
iPod®, iPhone®or iPadTM
In-ear design reduces outside noise to
improve audio quality
Includes three sizes of silicone tips so
you are sure to find the perfect fit
 Gold-plated 3.5mm (1/8”) stereo plug
reduces static and interference
Replacing the tips
1. Pick the correct size tips to fit your ears.
Correct size is
important for good
sound quality.

3
3
2. Twist and pull off.
3. Press on the new tip.
Make sure the inner
sleeve seals around
the speaker node.
Using the in-line
remote buttons
Top button: press to
increase the volume.
Bottom button: press to
decrease the volume.
Middle button:
To Do this
Play Press once
Pause/resume
playback Press once
Go to next track Press twice
Go to previous
track
Press three times within 6
seconds
Fast forward Press twice and hold
Rewind Press three times and hold
Middle
button

4
4
nNote: The in-line remote and mic are
supported only by iPod nano®4th and 5th
Gen., iPod classic®120G/160G, iPod touch®
2nd/3rd Gen., iPhone®3GS, and iPadTM. The
remote is supported by iPod shuffle®3rd Gen.
Audio is supported by all iPod models. Requires
latest iPod software.
Wrap the cord
1. Press the in-line remote
to the slot of the cord
manager.
2. Wrap the cord neatly
and clamp the ends
with the cord manager.
Listening Safely
Do not wear headphones, earphones, or earbuds
while operating a motor vehicle or riding a bicycle.
This can create a traffic hazard and could be illegal
in some areas.
To protect your hearing, follow these guidelines:
Do not listen at high volume levels. Extended
high volume listening can lead to permanent
hearing loss.

5
5
Set the volume to the lowest setting. Then turn
on your audio device and adjust the volume to
a comfortable level.
Avoid increasing the volume. Your ears will
adapt to the volume level, so a level that does
not cause discomfort could still damage your
hearing.
Specifications
Frequency Response ....................... 20 – 20,000 Hz
Sensitivity ........................................... 97 dB ± 3 dB
Impedance.................................................18 Ohms
Power............................Rated: 3 mW; Max.: 10mW
Cord Length............................................ 1.2 m (4 ft)
Cable Type..........................................................TPE
Specifications are subject to change and improvement without
notice. Actual product may vary from the images found in this
document.
Limited Warranty
Ignition L.P. warrants this product against defects in materials
and workmanship under normal use by the original purchaser
for ninety (90) days after the date of purchase. IGNITION L.P.
MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by
or attributable to abuse, misuse, failure to follow instructions,
improper installation or maintenance, alteration, accident,
Acts of God (such as floods or lightning), or excess voltage
or current; (b) improper or incorrectly performed repairs by

6
6
persons who are not a Ignition L.P. Authorized Service Facility;
(c) consumables such as fuses or batteries; (d) ordinary wear
and tear or cosmetic damage; (e) transportation, shipping
or insurance costs; (f) costs of product removal, installation,
set-up service, adjustment or reinstallation; and (g) claims by
persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take
the product and the sales receipt as proof of purchase date to
the place of purchase. Ignition L.P. will, at its option, unless
otherwise provided by law: (a) repair the product without
charge for parts and labor; (b) replace the product with the
same or a comparable product; or (c) refund the purchase
price. All replaced parts and products, and products on which
a refund is made, become the property of Ignition L.P. New
or reconditioned parts and products may be used in the
performance of warranty service. Repaired or replaced parts
and products are warranted for the remainder of the original
warranty period. You will be charged for repair or replacement
of the product made after the expiration of the warranty
period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES
AND CONDITIONS NOT STATED IN THIS LIMITED
WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE
IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY
OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED
WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE,
SHALL EXPIRE ON THE EXPIRATION OF THE STATED
WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE
NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF
THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH
RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED
DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE
OF THE PRODUCT OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO,
ANY DAMAGES RESULTING FROM INCONVENIENCE AND
ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR
PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR

7
7
CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P. HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some States do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal
rights, and you may also have other rights which vary from
State to State. You may contact Ignition L.P. at: Ignition L.P.,
3102 Maple Ave. Suite 450, Dallas, TX 75201 02/09
For product support, call
1-866-315-0426
Complies with the European Union’s
“Restriction of Hazardous Substances
Directive,” which protects the environment by
restricting specific hazardous materials and products.
“Made for iPod”, “Made for
iPhone” and "Made for iPad" mean
that an electrical accessory has
been designed to connect specifically to iPod, iPhone or iPad,
respectively, and has been certified by the developer to meet
Apple performance standards. Apple is not responsible for
the operation of this device or its compliance with safety and
regulatory standards. iPhone, iPod, iPod classic, iPod nano, iPod
shuffle, and iPod touch are trademarks of Apple, Inc., registered in
the U.S. and other countries. iPad is a trademark of Apple Inc.
Printed
in China
06A10
3300353
Protect the environment by recycling used electronics.
Go to E-CyclingCentral.com to find an electronic recycling
center near you.
© 2010. Ignition L.P. All rights reserved. Auvio
is a registered trademark used by Ignition
L.P. Package and user’s guide are recyclable.
User’s guide contains recycled material.
4
Made for iPod Logo Guidelines
March 2010
Combination Logos
Combination logos are used to indicate that a third-party product is compatible with
more than one Apple product: iPod and iPad; iPod and iPhone; iPhone and iPad; or
iPod, iPhone, and iPad.
The Combination logos must be used only with products that have been approved
as Licensed Products in the Made for iPod License Agreement and iPhone/iPad
Supplement signed by Apple.
Important: Make sure you select the correct Combination logo to indicate your
product’s compatibility. Only one Combination logo can appear on a layout surface.
Comply with the complete graphic standards and usage guidelines provided in the
preceding pages.
COMPANY
Product Name
Made for
iPod touch (1st and 2nd generation),
iPhone 3GS, iPhone 3G, iPhone
A Combination logo can be used on
product communications, including
advertising, packaging, manuals, web pages,
and printed collateral. The logo should be
clearly subordinate to the company or
product name. Always use the correct
wording when identifying the models
for which your product is designed (see
“How to Indicate Support for Multiple
Apple Products” on page 9).