AUVIO 4000014 User manual

THE PERFORMANCE YOU NEED
®
TM
6.5’’ 80W 2-Way
In-Ceiling Speaker
User’s Guide 4000014
Please read this user’s guide before using your new
speaker.

2
2
Package Contents
Speaker
Template/Paint mask
User’s Guide
Features
Mounts flush inside your ceiling for a sleek appearance
Tweeter can be titled to direct the sound to best suit
the room
Two-way acoustic design provides great audio quality
from both ends of the sound spectrum
Gold-plated spring-loaded terminals help reduce
interference and work with any standard speaker wire
Foam edge forms a snug fit to reduce disruptive vibrations
Grille and frame can be painted to match your decor
Easy to install using the included template
Required Tools
To mount your speaker, you need these tools
(not supplied):
Drywall or keyhole saw
Phillips screwdriver
18-20 gauge speaker wire
Wire stripper
Pencil or marker
1Prepare Speaker and
Location
Be sure the mounting surface is:
between 2/5inch and 1 3/8inch (10 – 35mm) thick.

3
3
has at least 3 1/8inch (79 mm) clearance behind the
mounting surface. Avoid wall studs
or other objects that might block
the back of the speaker.
1. Remove the inner cardboard disc
from the supplied template/paint
mask and keep it for later. Use
the outer portion of the mask as a
template to mark the cutout hole size and location for
mounting the speaker.
2. Use a drywall or keyhole saw to cut the hole.
(Optional) Paint the Grille
nNote: Do not paint internal
speaker components. We
recommend you spray-paint the grille
so no paint blocks the holes.
1. Push any two opposite mounting
tabs and remove the grille.
2. Remove the dust cloth from
behind the grille.
3. Paint the grille and replace the
dust cloth after the paint is dry.
(Optional) Paint the Frame
To avoid paint entering the speaker,
remove the grille and insert the
supplied cardboard paint mask. After
the paint is dry, remove the paint
mask and replace the grille.
Template
Paint mask
Mounting tab

4
4
2Connect Speaker Wires
Connect the speaker to your amplifier outputs, using wire
that is color-coded or otherwise marked to help connect
the wires correctly.
1. Turn off the amplifier and all associated equipment.
2. Route speaker wire from the amplifier to the speaker.
3. Separate about 2 inches (50 mm) of speaker wire at
each end.
4. Using a wire stripper, remove about ½ inch (13 mm) of
insulation from each wire and twist
the ends.
5. Connect the positive wire (usually
red) to a red speaker terminal, then
connect the negative wire (usually
black) to the black terminal.
6. Connect the wire from the red
speaker terminal to the amplifier’s
positive (+) terminal, then connect
the wire from the black speaker terminal to the
amplifier’s negative (–) terminal.
1/2’’
1/2’’
Strip insulation
Split wire
Amplifier
AM
LOOP
FM UNBAL
75
Ω
ANTENNA
FRONT
RL
CENTERSURROUND
S
K
E
R
S
RL
S-VIDEO cable Coaxial digital cable
Composite Video Cables Audio Cables Component Video Cables
SPEAKERS

5
5
n Notes:
Make sure that the polarities and impedance of the
speaker and amplifier match.
Avoid routing the speaker wire near electrical wires.
Do not nail, staple, or otherwise puncture the speaker
wire.
Use a speaker wire no thicker than 14 gauge A.W.G.
and no longer than 30 ft to avoid signal loss in the
cable.
3Mount the Speaker
1. Remove the grille to expose the mounting screws.
2. Turn in the mounting tabs, allowing the speaker to fit
into the mounting hole. Then insert the speaker into
the hole.
3. Turn out the tabs and use the supplied screws to
attach the speaker to the wall or ceiling. Be careful not
to overtighten.
4. Press to adjust the tweeter to best suit the room’s
acoustics and replace the grille.
Tweeter

6
6
nNote: When removing the speaker from the wall or
ceiling, loosen the screws just enough to remove the
speaker. This will prevent loss of the mounting tabs behind
your wall.
Maintenance
To avoid damaging the speaker, turn down the volume
of your amplifier before turning it on.
Do not use overrating power, which can damage
sound quality and loudspeaker drivers.
Clean your speaker with a soft cloth.
This speaker is not magnetically shielded. Placing
it near a TV set may magnetize the TV’s screen and
cause viewing issues.
Specifications
Power Handling ............................... 40W RMS, 80W Max.
Frequency Response .....................................60-22,000 Hz
Crossover frequency.............................................. 3500 Hz
Impedance.................................................8 ohms nominal
Sensitivity .................................................... 88dB @ 1W/M
Woofer........................................................6.5-in (16.5 cm)
Tweeter............................................................1-in (2.5 cm)
Cutout Diameter...................................... 7.5-in (190.5 mm)
Mounting Depth ....................................... 3.5-in (88.9 mm)
Specifications are subject to change and improvement without
notice. Actual product may vary from the images found in this
document.

7
7
Limited Warranty
Ignition L.P. warrants this product against defects in materials and
workmanship under normal use by the original purchaser for one (1) year
after the date of purchase. IGNITION L.P. MAKES NO OTHER EXPRESS
WARRANTIES.
This warranty does not cover: (a) damage or failure caused by or attributable
to abuse, misuse, failure to follow instructions, improper installation or
maintenance, alteration, accident, Acts of God (such as floods or lightning),
or excess voltage or current; (b) improper or incorrectly performed repairs
by persons who are not a Ignition L.P. Authorized Service Facility; (c)
consumables such as fuses or batteries; (d) ordinary wear and tear or
cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs
of product removal, installation, set-up service, adjustment or reinstallation;
and (g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the product
and the sales receipt as proof of purchase date to the place of purchase in
the U.S. Ignition L.P. will, at its option, unless otherwise provided by law:
(a) repair the product without charge for parts and labor; (b) replace the
product with the same or a comparable product; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is
made, become the property of Ignition L.P. New or reconditioned parts and
products may be used in the performance of warranty service. Repaired
or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the
product made after the expiration of the warranty period.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND
CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED
WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE
IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE
IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL
EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT
OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY,
LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR
PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH
OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P.
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

8
8
© 2010. Ignition L. P. All rights reserved. Auvio is a registered trademark used by
Ignition L.P. Package and insert are recyclable. Insert contains recycled material.
Protect the environment by recycling used electronics. Go to
E-CyclingCentral.com to find an electronic recycling center near you.
Get more from your audio and video equipment. See what
you’ve been missing. With Auvio, you control the experience.
Auvio was established by a group of technophiles to
provide high quality audio and video products without
the high sticker price. The Auvio philosophy is for you to
experience audio and video as it was intended to be: pure
and distortion free.
We know electronics can be intimidating. Auvio simplifies
your experience by providing the right products, with the
right specs, to work with your equipment.
Be confident about your purchase: your new Auvio product
incorporates the latest technology, is built to the highest
quality standards, and reduces environmental impact by
complying with RoHS environmental restrictions.
Some states do not allow limitations on how long an implied warranty lasts
or the exclusion or limitation of incidental or consequential damages, so the
above limitations or exclusions may not apply to you. This warranty gives
you specific legal rights, and you may also have other rights which vary
from state to state. You may contact Ignition L.P. at:
Ignition L.P., 3102 Maple Ave., Suite 450, Dallas, TX 75201 02/09
For product support, call
1-866-315-0426
Printed
in China
09A10
4000014
Complies with the European Union’s “Restriction of Hazardous
Substances Directive,” which protects the environment by
restricting specific hazardous materials and products.