AUVIO 4000438 User manual

THE PERFORMANCE YOU NEED
®
®
Home Bluetooth®Speaker
User’s Guide 4000438
Please read this user’s guide before using your new
speaker.
2
23 34 45 5
Connect Power
Connect your speaker to the standard wall outlet
using the AC power adapter and AC cable.The
standby indicator lights red.
1. Plug the output cable end of the AC power
adapter into the speaker’s DC IN jack.
2. Plug the AC cable to the jack of the AC power
adapter.
3. Plug the AC cable to the wall outlet. The power
indicator of the AC power adapter lights.
Use Your Speaker
1. Press the power button (G), the Bluetooth
indicator flashes red and blue as the speaker
searches for a Bluetooth-enabled device.
2. Activate your device’s Bluetooth function (refer
to your device’s user’s guide).
3. When AUVIO4000438 appears in the Bluetooth
devices list, pair it to your device.
4. You can control your speaker through your device
or the remote or with the speaker’s buttons.
Package Contents
Home Bluetooth Speaker
AC Power Adapter
AC Cable
Remote Control
User’s Guide
Features
Sonic emotion absolute 3D technology* adopted
to produce rich, full sound that permeates every
inch of your room
Remote for conveniently controlling the speaker
from a distance
USB charging port charges your devices
Compatible with most Bluetooth enabled tablets,
laptops, MP3 players, and smartphones with iOS
or Android™ platforms
* Sonic Emotion Absolute 3D
is the listening experience.
nNote: You can download the free Auvio EQ
App from the App StoreSM and Google PlayTM to
customize your calls and music.
device but resumes connection once the device
is close.
If the speaker malfunctions, reset it by pressing
§/twice when the Bluetooth indicator flashes red
and blue .
Charge Your Device
1. Set the A/B switch for charging your device:
Afor Apple, Bfor Samsung.
2. Use a USB cable (not included) to connect your
device to the speaker’s USB port.
Use AUX IN
For audio devices without Bluetooth function, use
an audio cable (not included) to connect it to your
speaker’s AUX IN jack. The Bluetooth indicator lights
red and then turns off.
Volume +/–
Previous/Next
Power On/Off
Play/Pause/
Disconnect Bluetooth
Sonic Emotion
3D Indicator
5/ Version 1.2 Brand / Confidential sonicemotion ag 2012
Logo
Standard version
5/ Version 1.2 Brand / Confidential sonicemotion ag 2012
Logo
Standard version
nNote:
Press and hold §for 4 seconds to disconnect
Bluetooth. The speaker starts searching for other
Bluetooth devices.
If your device uses Android 2.0 and below, enter
the password 0000 for Bluetooth connection.
If the connected device moves too far away from
the speaker, the speaker disconnects from the
A/B Switch
AUX IN USB Port
Bluetooth Indicator
Fully insert
AC cable
Power Indicator
Standby Indicator



4000438_UG_EN_022513.indd 1-5 3/6/2013 10:42:51 AM

6
67 78 89 910 10
Printed
in China
03A13
4000437
© 2013. Ignition L.P. All rights reserved. Auvio is
a registered trademark used by Ignition L.P.
Package and user documentation are recyclable.
User documentation contains recycled material.
The Bluetooth®word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Ignition L.P. is under license.
Other trademarks and trade names are those of their respective owners.
Sonic Emotion and
5/Version 1.2 Brand / Confidential sonicemotionag 2012
Logo
Standard version
are registered trademarks of sonic emotion ag.
Google Play and Android are trademarks of Google Inc.
Apple is a trademark of Apple Inc., registered in the United States and other
countries.
Samsung is a registered trademark of Samsung Electronics Co., Ltd.
IGNITION L.P. EXPRESSLY DISCLAIMS ALL WARRANTIES AND
CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY
IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW,
INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY
AND, IF APPLICABLE,THE IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE
EXPIRATION OFTHE STATED WARRANTY PERIOD.
EXCEPT AS DESCRIBED ABOVE, IGNITION L.P. SHALL HAVE
NO LIABILITY OR RESPONSIBILITY TOTHE PURCHASER OF
THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH
RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED
DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF
THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS
WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES
RESULTING FROM INCONVENIENCE AND ANY LOSS OFTIME,
DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN
IF IGNITION L.P. HAS BEEN ADVISED OFTHE POSSIBILITY OF
SUCH DAMAGES.
Some states do not allow limitations on how long an implied
warranty lasts or the exclusion or limitation of incidental or
consequential damages, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
You may contact Ignition L.P. at:
Ignition L.P., 3102 Maple Ave., Suite 450, Dallas, TX 75201 02/09
For product support, call
1-866-315-0426
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Limited Warranty
Ignition L.P. warrants this product against defects in materials
and workmanship under normal use by the original purchaser
for ninety (90) days after the date of purchase. IGNITION L.P.
MAKES NO OTHER EXPRESS WARRANTIES.
This warranty does not cover: (a) damage or failure caused by
or attributable to abuse, misuse, failure to follow instructions,
improper installation or maintenance, alteration, accident, Acts of
God (such as floods or lightning), or excess voltage or current; (b)
improper or incorrectly performed repairs by persons who are not
a Ignition L.P. Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) ordinary wear and tear or cosmetic damage;
(e) transportation, shipping or insurance costs; (f) costs of product
removal, installation, set-up service, adjustment or reinstallation;
and (g) claims by persons other than the original purchaser.
Should a problem occur that is covered by this warranty, take the
product and the sales receipt as proof of purchase date to the
place of purchase. Ignition L.P. will, at its option, unless otherwise
provided by law: (a) repair the product without charge for parts
and labor; (b) replace the product with the same or a comparable
product; or (c) refund the purchase price. All replaced parts and
products, and products on which a refund is made, become the
property of Ignition L.P. New or reconditioned parts and products
may be used in the performance of warranty service. Repaired
or replaced parts and products are warranted for the remainder
of the original warranty period. You will be charged for repair
or replacement of the product made after the expiration of the
warranty period.
nNote:
Bluetooth is automatically deactivated when
AUX IN is connected.
Bluetooth is deactivated if your device has an
audio cable or earphones plugged in.
The speaker and remote control only volume for
AUX IN connections. Use the controls on your
device to control music playback.
Care and Caution
Do not operate the speaker if it has been
damaged in any way.
Do not place heavy objects on top of the
speaker.
To avoid electromagnetic interference, do
not place the speaker on top of a TV or other
electrical appliance.
Specifications
Power Input .............................................DC 15V, 4A
Output ............................. 10W × 6 RMS (THD 10%)
USB Charging Output............................... 5V DC, 1A
Bluetooth Frequency Response ........100Hz – 18kHz
Bluetooth Connection Range................. 30 ft. (9.1m)
Bluetooth Protocol .................... V2.1 + EDR Class 2
Drivers ................................ 50mm × 4 & 75mm × 2
S/N Ratio...................................≥70dB (A weighted)
Impedance........................................................... 8 Ω
Dimensions (HWD) ........................ 4.7 × 14 × 5.2 in
.................................................... (118×355×131mm)
Weight ........................................ 91 ounces (2578g)
Specifications are subject to change and
improvement without notice. Actual product may
vary from the images found in this document.
FCC Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
If you cannot eliminate the interference, the FCC requires that you
stop using your product. Changes or modifications not expressly
approved by Ignition L.P. could void the user’s authority to operate
the equipment.
4000438_UG_EN_022513.indd 6-10 3/6/2013 10:42:51 AM
FCC RF Radiation Exposure Statement Caution: This Transmitter
must be installed to provide a separation distance of at least 20 cmmust be installed to provide a separation distance of at least 20 cm
from all persons.