AUXO CIRA User manual

CIRA USER MANUAL

READ THIS MANUAL BEFORE USING THE
PRODUCT. FAILURE TO FOLLOW
INSTRUCTIONS AND SAFETY PRECAUTIONS
IN THIS MANUAL CAN RESULT IN SERIOUS
INJURY OR DEATH.
FOR EASY FUTURE REFERENCE,
DOWNLOAD AND SAVE THIS USER MANUAL
AND WARRANTY POLICY.
DOWNLOAD THIS MANUAL AT:
www.auxo-official.com/pages/download

* Each glass piece is hand blown and may vary
slightly in size
1. Cira Base x 1
2. Quartz Chamber x 1
3. Titanium Chamber x 1
4. Glass Cap* x 1
5. Glass Mouthpiece* x 1
6. Charging Cable x 1
7. Charging Adapter x 1
8. Charging Base x 1
9. Wax Loading Tool x 1
10. Silicone Tether x 1
11. Cotton Swab x 5
12. User Manual x1
1
9 11
4
2
3
7
10
x 5
6
8
5
WHAT’S IN THE BOX
12

QUICK START
Attach silicone tether here
*It is recommended to use Cira fixed onto the charging
base and placed on a stable surface to prevent tilting.
Fully charge the device before first use.
Screw the heating chamber onto the Cira
base.
Fill glass mouthpiece with water just above
the air-holes but below the fill line. Do not fill
mouthpiece while it’s attached to Cira base.
Use the wax loading tool to place wax on the
heating chamber.
Secure glass mouthpiece onto the Cira base
and place glass cap on top of the chamber.
Attach the silicone tether to keep cap safe
during use.

Attention:
ON / OFF
CCELL
2 Seconds
Press the ⊙button for 2 seconds to turn on
the device.
Press “+/-” to adjust temperature that fits your
consumption needs, then double click ⊙
button to start the session. The device will
start preheating, wait 20 seconds to inhale.
Press the ⊙button for 2 seconds again to
turn off.
The device will go into standby when the
session ends.
The device will turn off automatically if no
activities are detected for 10 minutes after
turning on or in standby mode.
Cleaning is recommended after each use.

TEMPERATURE SETTING
+
SetTemp
SetTemp
870 F
880 F
-
Set Temp
860 F
SetTemp
10000F
MAX
Temperature range is from 450 - 1000 ℉.
To adjust temperature
1. Ensure device is on. Press +/- to adjust
temperature.
2. Each temperature level differs 10 ℉.
3. Press ⊙button twice continuously to start
heating after the temperature is set.
During the last 10 seconds of the session, the
15-second extended heating mode can be
implemented by double pressing the “+” key.

BATTERY & CHARGING
Battery Level
The OLED display will show the current battery level
when the device is on.
To charge the device
1. Connect one end of the charging cable to
the charging base and the other end to the
charging adapter.
2. Alternatively, connect one end of the charging
cable directly to the device itself and the other end
to the charging adapter.

Cleaning is recommended after each use.
1. Heat the chamber to remove any residues stuck
on the walls of the chamber.
2. Let chamber cool down to room temperature
and unscrew from Cira base.
3. Submerge chamber in 90%+ isopropyl alcohol
for over 20 minutes, use a cotton swab to clean
gently. Do not use water as there will be mineral
residuals that may affect the usage of the
chambers.
CLEANING: HEATING CHAMBER
CLEANING: GLASS COMPONENTS
Carefully remove glass mouthpiece and cap
from Cira base before cleaning.
1. Once removed, soak the glass components in
isopropyl alcohol.
2. Rinse clean with water.
3. Allow glass components to dry thoroughly before
re-attaching to Cira base.
Do not handle if hot.
Isopropyl alcohol is highly flammable.
Let dry completely before using the
device again.

STORAGE
SAFETY
Do not expose the device to direct sunlight,
dust, moisture or mechanical shock.
The device may no longer work properly if
dropped.
This product contains glass components.
Do not place heavy loads on top or drop it.
Do not attempt to disassemble or repair the
device by yourself as damage or personal
injury may occur.
Keep body parts, clothing, etc. away from the
heat source to prevent scalding or damage to
personal property. To prevent scalding, when
the device is heating, do not remove the glass
mouthpiece or touch the heating chamber.
Use only the power adapter provided with this
device to charge it.
Do not use the device while it is charging.
Make sure your hands are dry before touching
the charging device to prevent electric shock.
The device is not recommended to use
outdoor while it is raining.
This device is not recommended for pregnant
or breastfeeding women.
If any abnormality is observed, please stop
using immediately and contact a professional
after-sales service technician.

This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and (2) this device must accept
any interference received, including
interference thatmay cause undesired
operation. Any Changes or modifications not
expressly approved by the party responsible
for compliance could void the user’s authority
to operate the equipment. This equipment
has been tested and found to comply with
the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
generates uses and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment off
and on, the user is encouraged to try to
correct the interference by one or more of the
following measures:
1. Reorient or relocate the receiving antenna.
2. Increase the separation between the
quipment and receiver.
3. Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.