Avalue Technology EPD-3133 User manual

Part No. E2017E330A0R
EPD-3133
31.2” E Ink Public Display
Quick Reference Guide
1st Ed –07 September 2020
Copyright Notice
Copyright 2020 Avalue Technology Inc., ALL RIGHTS RESERVED.

EPD-3133
2 EPD-3133 Quick Reference Guide
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "B" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTATLLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

Quick Reference Guide
EPD-3133 Quick Reference Guide
3
Content
1. Getting Started ........................................................................................................4
1.1 Safety Precautions....................................................................................................4
1.2 Packing List...............................................................................................................4
1.3 System Specifications...............................................................................................5
1.4 System Overview......................................................................................................7
1.5 System Dimensions ..................................................................................................8
2. Hardware Configuration .......................................................................................11
2.1 EPD-3133 connector mapping................................................................................12
2.1.1 Serial port connector (COM)..................................................................................................... 12
3. T1000 test tool..............................................................................................................13
3.1 Driver ......................................................................................................................14
3.1.1 Windows 7................................................................................................................................. 14
3.1.2 Windows 10............................................................................................................................... 19
3.2 Application ..............................................................................................................20
3.3 Installation...............................................................................................................24

EPD-3133
4 EPD-3133 Quick Reference Guide
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
1 x EPD-3133 31.2” E Ink Public Display
1 x Power Adapter
1 x DC-in extended cable
.

Quick Reference Guide
EPD-3133 Quick Reference Guide
5
1.3 System Specifications
Component
Mother Board
ECM-APL2-B (with CPU Bottom Mounted)
CPU
Onboard Intel® Celeron® SoC BGA Processor N3350
CPU Cooler (Type)
Heatsink
Memory
1 x 204-Pin DDR3L 1866MTs SO-DIMM up to 8GB
Power Supply
+19V DC in
Adapter
+19V/3.4A (65W)
Speaker
2 x 2W(optional, need to add AUX-031 Amplifier Board)
Wireless LAN
mPCIe Wi-Fi/BlueTooth module(optional)
Bluetooth
mPCIe Wi-Fi/BlueTooth module(optional)
Operating System
Android 8.1(default) / Windows 10 IoT
Other Component
T1000 (E9697E33004R-A)
Transfer board (E9697E33001R-B)
Storage
Solid State Drive
1 x 2.5” Drive Bay
Other Storage Device
1 x mSATA (Shared mPCIe)
Panel
LCD Panel
E Ink ED312TT2 or ED312TT3
(Active area with 2560 x 1440 pixels and 16:9 aspect ratios)
Touch Screen
P-cap touch(optional)
Touch Controller
EETI
Others
Front light module(optional)
External I/O
Serial Port
1 x DB-9 male connector for COM1 supports RS232
USB Port
4 x USB 3.1 (Gen1 5Gbps)
DIO Port
8-bit GPIO(open frame)
Video Port
2 x HDMI (3840x2160@30Hz)
Audio Port
2 x speaker out (L/R 1x2 header)
LAN Port
2 x RJ45 LAN port (1 x Intel® I211AT/1 x Intel® I210IT, 10/100/1000
Base-Tx Gigabit Ethernet Compatible)
Wireless LAN Antenna
2 x Antenna Mounting with Dust Cover
Mechanical
Power Type
Power Input: +19V/3.4A (65W)
Power Connector Type
Lockable DC Jack
Dimension
750 x 445 x 36.7 mm
Weight
7.2 Kgs (True flat mode) / 4.9 Kgs (Front bezel mode)

EPD-3133
6 EPD-3133 Quick Reference Guide
Color
Black
Fanless
Full System Fan-less
OS Support
Android 8.1(default) / Windows 10 IoT
(400 × 200 mm) VESA mount compliant(optional)
Reliability
EMI Test
CE/FCC Class A
Vibration Test
With SSD : 1.5Grms, IEC 60068-2-64, Random, 5 ~ 500Hz, 30min/axis
Mechanical Shock Test
With SSD : 10Grms, IEC 60068-2-27, Half Sine, 11ms
Drop Test
ISTA-2A, IEC-60068-2-32 (96.5cm)
Operating Temperature
0 ~ 50°C (32 ~ 122°F)
Operating Humidity
0% ~ 90% Relative Humidity, Non-condensing
Storage Temperature
-20 ~ 60°C (-4 ~ 140°F)
Note:
Specifications are subject to change without notice.

Quick Reference Guide
EPD-3133 Quick Reference Guide
7
1.4 System Overview
Connectors
Label
Function
Note
LAN
2 x RJ-45 Ethernet connector
USB3.1
4 x USB3.1 connector
COM
Serial port connector
HDMI
2 x HDMI connector
DC IN
DC Power-in connector
Power Switch
Power Switch

EPD-3133
8 EPD-3133 Quick Reference Guide
1.5 System Dimensions
EPD-3133 True Flat mode
(Unit: mm)

Quick Reference Guide
EPD-3133 Quick Reference Guide
9
EPD-3133 Open Frame mode
(Unit: mm)

EPD-3133
10 EPD-3133 Quick Reference Guide
EPD-3133 Front Bezel mode
(Unit: mm)