Avalue Technology EMX-ADLP-B1 User manual

Part No. E2047MXAD00R
EMX-ADLP-B1
12th Gen Intel® Core™ SoC & Celeron Processor Thin Mini
ITX Motherboard
User’s Manual
1st Ed –08 September 2023

EMX-ADLP-B1 User’s Manual
2 EMX-ADLP-B1 User’s Manual
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2023 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

User’s Manual
EMX-ADLP-B1 User’s Manual
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

EMX-ADLP-B1 User’s Manual
4 EMX-ADLP-B1 User’s Manual
Product Warranty
Avalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Avalue, or which have been subject to
misuse, abuse, accident or improper installation. Avalue assumes no liability under the
terms of this warranty as a consequence of such events. Because of Avalue’s high
quality-control standards and rigorous testing, most of our customers never need to use our
repair service. If any of Avalue’s products is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will be billed according
to the cost of replacement materials, service time, and freight. Please consult your dealer
for more details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example,
CPU type and speed, Avalue’s products model name, hardware & BIOS
revision number, other hardware and software used, etc.) Note anything
abnormal and list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material
authorization) number from your dealer. This allows us to process your good
return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales
receipt) in a shippable container. A product returned without proof of the
purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it
prepaid to your dealer.

User’s Manual
EMX-ADLP-B1 User’s Manual
5
Content
1. Getting Started............................................................................................................8
1.1 Safety Precautions ....................................................................................................8
1.2Packing List...............................................................................................................8
1.3 Document Amendment History .................................................................................9
1.4 Manual Objectives...................................................................................................10
1.5 System Specifications .............................................................................................11
1.6 Architecture Overview—Block Diagram ..................................................................15
2. Hardware Configuration...........................................................................................16
2.1 Product Overview....................................................................................................17
2.2 Jumper and Connector List .....................................................................................18
2.3 Setting Jumpers & Connectors ...............................................................................20
2.3.1 Serial port 1/2 pin9 signal select (JRI1/JRI2)................................................................................. 20
2.3.2 LVDS Back Light power selection (JSBKL1).................................................................................. 20
2.3.3 AT/ATX Power Mode Select (JSATX1).......................................................................................... 21
2.3.4 M2KB2 Voltage setting (JP1) ......................................................................................................... 21
2.3.5 Clear CMOS (JRTC1) .................................................................................................................... 22
2.3.6 LCD Inverter connector (JBKL1) .................................................................................................... 22
2.3.7 LCD Inverter connector (JBKL2) .................................................................................................... 23
2.3.8 LVDS connector (LVDS1) .............................................................................................................. 23
2.3.9 eDP_Panel connector (EDP1) ....................................................................................................... 24
2.3.10 General purpose I/O connector (JDIO1) ....................................................................................... 24
2.3.11 Serial port1 connector (JCOM1).................................................................................................... 25
2.3.12 Serial port2 connector (JCOM2).................................................................................................... 25
2.3.13 Serial port3 connector (JCOM3).................................................................................................... 26
2.3.14 Serial port4 connector (JCOM4).................................................................................................... 26
2.3.15 Serial Port 1 RS485/422 Mode connector (JRS485_1) ................................................................ 27
2.3.16 Serial Port 2 RS485/422 Mode connector (JRS485_2) ................................................................ 27
2.3.17 SATA Power connector 1 (SPWR1).............................................................................................. 28
2.3.18 Power connector (PWR1).............................................................................................................. 28
2.3.19 USB connector 3 (JUSB3)............................................................................................................. 29
2.3.20 USB connector 4 (JUSB4)............................................................................................................. 29
2.3.21 Speaker connector (SPK1)............................................................................................................ 30
2.3.22 SPI connector (JSPI) ..................................................................................................................... 30
2.3.23 Battery connector (BT1) ................................................................................................................ 31
2.3.24 Audio connector (JFAUD1)............................................................................................................ 31
2.3.25 JESPI1 connector (JESPI1) .......................................................................................................... 32

EMX-ADLP-B1 User’s Manual
6 EMX-ADLP-B1 User’s Manual
2.3.26 JEC1 connector (JEC1)................................................................................................................. 32
2.3.27 Miscellaneous setting connector 1 (JFPT1) .................................................................................. 33
2.3.28 Miscellaneous setting connector 2 (JFPT2) .................................................................................. 33
2.3.29 CPU fan connector (CPU_FAN1).................................................................................................. 34
2.3.30 Power connector (DCIN1) ............................................................................................................. 34
3.BIOS Setup ....................................................................................................................35
3.1 Introduction .............................................................................................................36
3.2 Starting Setup .........................................................................................................36
3.3 Using Setup ............................................................................................................37
3.4 Getting Help ............................................................................................................38
3.5 In Case of Problems................................................................................................38
3.6 BIOS setup..............................................................................................................39
3.6.1 Main Menu...................................................................................................................................... 39
3.6.1.1 System Language ...................................................................................................................... 40
3.6.1.2 System Date .............................................................................................................................. 40
3.6.1.3 System Time .............................................................................................................................. 40
3.6.2 Advanced Menu ............................................................................................................................. 40
3.6.2.1 Connectivity Configuration..................................................................................................... 41
3.6.2.2 CPU Configuration................................................................................................................. 41
3.6.2.2.1 Efficient-core Information....................................................................................................... 42
3.6.2.2.2 Performance-core Information............................................................................................... 43
3.6.2.3 Power & Performance ........................................................................................................... 43
3.6.2.3.1 CPU - Power Management Control....................................................................................... 44
3.6.2.4 PCH-FW Configuration.......................................................................................................... 45
3.6.2.4.1 Firmware Update Configuration............................................................................................. 45
3.6.2.5 ACPI Settings ........................................................................................................................ 46
3.6.2.6 Super IO Configuration.......................................................................................................... 46
3.6.2.6.1 Serial Port 1 Configuration .................................................................................................... 47
3.6.2.6.2 Serial Port 2 Configuration .................................................................................................... 48
3.6.2.6.3 Serial Port 3 Configuration .................................................................................................... 48
3.6.2.6.4 Serial Port 4 Configuration .................................................................................................... 49
3.6.2.7 EC 5782 HW monitor............................................................................................................. 50
3.6.2.8 S5 RTC Wake Settings.......................................................................................................... 50
3.6.2.9 Serial Port Console Redirection ............................................................................................ 51
3.6.2.9.1 Legacy Console Redirection Settings ................................................................................... 51
3.6.2.10 USB Configuration................................................................................................................. 52
3.6.2.11 Network Stack Configuration ................................................................................................. 53
3.6.2.12 NVMe Configuration .............................................................................................................. 53
3.6.3 Chipset ........................................................................................................................................... 54
3.6.3.1 System Agent (SA) Configuration.......................................................................................... 54

User’s Manual
EMX-ADLP-B1 User’s Manual
7
3.6.3.1.1 Memory Configuration ........................................................................................................... 55
3.6.3.1.2 Graphics Configuration.......................................................................................................... 55
3.6.3.1.3 VMD Configuration ................................................................................................................ 56
3.6.3.2 PCH-IO Configuration............................................................................................................ 56
3.6.3.2.1 PCI Express Configuration .................................................................................................... 57
3.6.3.2.2 SATA Configuration............................................................................................................... 62
3.6.3.2.3 HD Audio Configuration......................................................................................................... 63
3.6.3.3 Board & Panel Configuration ................................................................................................. 63
3.6.3.3.1 SHOW DMI INFO .................................................................................................................. 65
3.6.4 Security .......................................................................................................................................... 66
3.6.4.1 Secure Boot menu................................................................................................................. 66
3.6.5 Boot ................................................................................................................................................ 67
3.6.6 Save and exit.................................................................................................................................. 68
3.6.6.1 Save Changes and Reset...................................................................................................... 68
3.6.6.2 Discard Changes and Reset.................................................................................................. 68
3.6.6.3 Restore Defaults.................................................................................................................... 69
3.6.6.4 Launch EFI Shell from filesystem device .............................................................................. 69
4. Drivers Installation.......................................................................................................70
4.1 Install Chipset Driver ...............................................................................................71
4.2 Install VGA Driver....................................................................................................72
4.3 Install ME Driver......................................................................................................73
4.4 Install Audio Driver (For Realtek ALC897 and ALC888S HD Audio).......................74
4.5 Install LAN Driver ....................................................................................................75
4.6 Install Serial IO Driver .............................................................................................76
5. Mechanical Drawing ....................................................................................................77

EMX-ADLP-B1 User’s Manual
8 EMX-ADLP-B1 User’s Manual
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EMX-ADLP-B1 motherboard
1 x SATA cable
1 x SATA power cable
1 x I/O Shield

User’s Manual
EMX-ADLP-B1 User’s Manual
9
1.3 Document Amendment History
Revision
Date
By
Comment
1st
September 2023
Avalue
Initial Release

EMX-ADLP-B1 User’s Manual
10 EMX-ADLP-B1 User’s Manual
1.4 Manual Objectives
This manual describes in details Avalue Technology EMX-ADLP-B1 Single Board.
We have tried to include as much information as possible but we have not duplicated
information that is provided in the standard IBM Technical References, unless it proved to
be necessary to aid in the understanding of this board.
We strongly recommend that you study this manual carefully before attempting to set up
EMX-ADLP-B1 or change the standard configurations. Whilst all the necessary information
is available in this manual we would recommend that unless you are confident, you contact
your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that
make booting impossible. If this should happen, clear the CMOS settings, (see the
description of the Jumper Settings for details).
If you have any suggestions or find any errors regarding this manual and want to inform us
of these, please contact our Customer Service department with the relevant details.

User’s Manual
EMX-ADLP-B1 User’s Manual
11
1.5 System Specifications
EMX-ADLP-B1
Product
Features
Onboard Alder Lake-P 12th Intel® Core™ SoC i7/i5/i3/ Celeron®BGA Processor
(TDP: 15~45W)
*Support Consumer CPU SKU ONLY
*TDP design default: 15W
Two 262-pin DDR5 4800MHz SO-DIMM socket, supports up to 64GB Max (non ECC
only)
1 x Intel® I226LM 2.5 Gigabit Ethernet
1 x Intel® I219LM Gigabit Ethernet PHY
Realtek ALC888S-VD2-CG audio codec
TI TPA3113D2PWP Stereo Class-D 6W x 2 Audio Amplifier
2 x DP++, 1 x LVDS, 1 x eDP (Quadruple independent displays)
2 x SATA III, 1 x SATA Power
4 x USB2.0 by pin header
2 x USB3.2 Gen2, 2 x USB 3.0 Gen2 at I/O
4 x RS-232, 2 x RS422/485 (ZT3243 for RS232, MAX13487 Transceiver & SP485 IC
for RS422/485)
1 x M.2 Type B 3042/3052 (with 1 x PCI-e x1 (default), USB2.0, USB 3.2 Gen2 with 1
x SIM card slot support WWAN+GNSS
1 x M.2 Key E 2230 support Wi-Fi module and CNVi (1 x PCI-e x1 & USB 2.0 Signal)
1 x M.2 Key B 2242 (SATA Signal, shared with SATA2) slot support SSD storage
1 x M.2 Key M 2280 (PCI-e x4) slot for storage NVMe SSD
H-series: 1 x PCI-e x8 Gen4 with PCI-e x8 slot
P/U-series: 1 x PCI-e x4 Gen4 with PCI-e x8 slot
GPIO 16bit
Onboard NuvoTon NPCT754AABYX support SPI TPM 2.0
Support Line-out & Mic-in & Front audio pin-header
DC in +12V~24V
Product Specification
CPU
Onboard Alder Lake-P 12th Intel® Core™ SoC i7/i5/i3/Celeron® Processor (TDP:
15~45W)
H-Series: 25~45W, P-Series: 20~28W, U-Series: 12~15W
*Support Consumer CPU SKU ONLY
*TDP design default: 15W

EMX-ADLP-B1 User’s Manual
12 EMX-ADLP-B1 User’s Manual
BIOS
AMI uEFI BIOS, 256Mbit SPI Flash ROM
I/O Chip
EC-ITE: IT5782VG
ZT3243 for RS232, MAX13487 Transceiver & SP485 IC for RS422/485
System Memory
Two 262-pin DDR5 4800MHz SO-DIMM socket, supports up to 64GB Max (non ECC
only)
Watchdog Timer
H/W Reset, 1sec. –65535sec./min.1sec. or 1min. step
H/W Status
Monitor
CPU temperature monitoring
Voltage monitoring
CPU fan speed control
TPM
Onboard NuvoTon NPCT754AABYX support SPI TPM 2.0
iAMT
Yes
Expansion Slot
M.2
1 x M.2 Type B 3042/3052 (with 1 x PCI-e x1 (default), USB2.0, USB 3.2 Gen2 with 1
x SIM card slot support WWAN+GNSS
1 x M.2 Key E 2230 support Wi-Fi module and CNVi (1 x PCI-e x1 & USB 2.0 Signal)
1 x M.2 Key B 2242 (SATA Signal, shared with SATA2) slot support SSD storage
1 x M.2 Key M 2280 (PCI-e x4) slot for storage NVMe SSD
PCIe
H-series: 1 x PCI-e x8 Gen4 with PCI-e x8 slot
P/U-series: 1 x PCI-e x4 Gen4 with PCI-e x8 slot
Storage
M.2
1 x M.2 Key B 2242 (SATA Signal, shared with SATA2) slot support SSD storage
1 x M.2 Key M 2280 (PCI-e x4) slot for storage NVMe SSD
SATA
2 x SATA III
*SATA 2 share with M.2 key B SATA
Edge I/O
LAN
1 x Intel® I219LM Gigabit Ethernet PHY (LAN1)
1 x Intel® I226LM 2.5 Gigabit Ethernet (LAN2)
USB 3.1
2 x USB 3.2 Gen2 (USB1), 2 x USB 3.0 Gen.2 (USB2) (Hub Controller)
DP
2 x DP++ or 1 x eDP, 1 x LVDS (Quadruple independent displays)
DC Input
Mini Din 4-pin DC in Jack
Onboard I/O
COM
4 COM Port (JCOM1/JCOM2/JCOM3/JCOM4)
JCOM1 / JCOM2: Support RS-232 (default), RS-422/485 modify setting by
BIOS Setup & jumper (JRS485_1/2).
JCOM3 / JCOM4: Support RS-232.

User’s Manual
EMX-ADLP-B1 User’s Manual
13
2 x 2 x 3 pin, pitch 2.00mm connector jumper for RS-422/485 (JCOM1 & JCOM2)
(JRS485_1/2 Jumper)
4 x 2 x 5 pin, pitch 2.00mm connector support RS-232 (JCOM1 / JCOM2 / JCOM3 /
JCOM4)
* ZT3243 for RS232, MAX13487 Transceiver & SP485 IC for RS422/485
USB 2.0
2 x 2 x 5 pin, pitch 2.54mm connector for 4 USB 2.0 (JUSB3,JUSB4)
GPIO
1 x 2 x 10 pin, pitch 2.00mm connector for GPIO: 16 bits & +3.3S Level SMBus
(JDIO1)
SATA Power
1 x SATA Power (SPWR1)
CPU/System
FAN
1 x 1 x 4 pin, pitch 2.54mm CPU fan connector with smart fan function supported
(CPU_FAN1)
Buzzer
Onboard Buzzer (BZ1)
Front Panel
2 x 2 x 5 pin, pitch 2.54mm connector for front panel
RTC Battery
2 x 1 x 2 Pin Pitch 1.25mm horizontal type battery connector (CR2032 Battery)
AT/ATX Selector
1 x 1 x 3 pin pitch 2.54mm connector for AT/ATX jumper
Clear CMOS
1 x 3 pin, pitch 2.00mm connector for CMOS clear
LVDS
1 x 2 x 20 pin, pitch 1.25mm connector for LVDS
LCD Backlight
Brightness
2 x 1 x 5 pin, pitch 2.00mm Wafer connector for LCD inverter backlight connector
(5V/12V) (JBKL1,2)
1 x 1 x 3 pin, pitch 2.00mm connector LCD backlight brightness adjustment
(PWM/DC)
LCD Inverter
2 x 1 x 5 pin, pitch 2.00mm Wafer connector for LCD inverter backlight connector
BIOS SPI
1 x 2 x 4 pin, pitch 2.00mm connector for BIOS SPI (JSPI1)
eSPI
1 x 2 x 6 pin, pitch 2.00mm connector for eSPI debug (JESPI1)
EC Debug
1 x 2 x 6 pin, pitch 2.00mm connector for EC SPI (JEC1)
Audio
1 x 2 x 6 pin, pitch 2.00mm connector for front Audio (JFAUD1)
DC-Input
Mini Din 4-pin DC in Jack
Amp Connector
1 x 4 pin, pitch wafer 2.00mm connector for 6W x 2 Speaker (SPK1)
Other
1 x 2 x 10 pin, pitch 1.25mm connector for eDP
1 x 2 x 2 pin, pitch 4.20mm connector for power input connector (PWR1)
Display
Graphic Chipset
Intel® Iris® Xe Graphics (For Core i5 & i7)
Intel® UHD Graphics for 12th Gen Intel® Processors (For Core i3 & Celeron)
Spec. &
Resolution
8K(4K+4K) DP1+DP2 (DP1.4): Max: 8192 x 4320@60 Hz
Single DP port (2021/2 Lab test): 5120 x 3200@60 Hz
Note: This resolution is actual test result. Intel resolution as below:
2 x DP++ (DP1+DP2): 1920 x 1080@60 Hz (with passive Displayport(DP) to HDMI
Dongle/Adapter)

EMX-ADLP-B1 User’s Manual
14 EMX-ADLP-B1 User’s Manual
LVDS: 1920 x 1080 Dual channel 18/24-bits LVDS (Chrontel CH7511B eDP to
LVDS)
eDP: 3840 x 2160@60 Hz
*2 x DP++, LVDS, eDP Default for Thin Mini ITX
Multiple Display
Quadruple Independent Display: 2 x DP++, LVDS, eDP (Thin Mini ITX)
Audio
Audio Codec
Realtek ALC888S-VD2-CG audio codec (co-lay ALC897)
Amplifier
TI TPA3113D2PWP Stereo Class-D 6W x 2 Audio Amplifier
Ethernet
LAN Chipset
1 x Intel® I219LM Gigabit Ethernet PHY (LAN1)
1 x Intel® I226LM 2.5 Gigabit Ethernet (LAN2)
LAN Spec.
10/100/1000 Base-Tx GbE compatible & 2.5 Gigabit Ethernet
Mechanical & Environmental Specification
ACPI
Single power ATX Support S0, S3, S4, S5
ACPI 5.0 Compliant
Power Mode
AT / ATX mode Switchable Through Jumper
Operating Temp.
0~60C (32~140°F) w/HDD/SSD, ambient with 0.5 m/s Air flow
Storage Temp.
-40 ~ +75°C
Operating
Humidity
40°C @ 95% Relative Humidity, Non-condensing
Size (L x W)
6.7" x 6.7" (170mm x 170mm)
Weight
0.88lbs (0.4kg)
OS Information
Win11 64bit, Win10 64bit.
Linux
Power
Requirement
DC in +12V ~ +24V
ACPI
Single power ATX Support S0, S3, S4, S5
ACPI 5.0 Compliant
Note:
Specifications are subject to change without notice.

User’s Manual
EMX-ADLP-B1 User’s Manual
15
1.6 Architecture Overview—Block Diagram
The following block diagram shows the architecture and main components of EMX-ADLP-B1.

EMX-ADLP-B1 User’s Manual
16 EMX-ADLP-B1 User’s Manual
2. Hardware
Configuration

User’s Manual
EMX-ADLP-B1 User’s Manual
17
2.1 Product Overview

EMX-ADLP-B1 User’s Manual
18 EMX-ADLP-B1 User’s Manual
2.2 Jumper and Connector List
You can configure your board to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch.
It consists of two metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case, you would connect either two pins.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
If you have any doubts about the best hardware configuration for your application, contact
your local distributor or sales representative before you make any changes.
The following tables list the function of each of the board’s jumpers and connectors.
Jumpers
Label
Function
Note
JRI1/2
Serial port 1/2 pin9 signal select
3 x 2 header, pitch 2.00mm
JSBKL1
LVDS Back Light power selection
3 x 1 header, pitch 2.00mm
JSATX1
AT/ATX Power Mode Select
3 x 1 header, pitch 2.54mm
JP1
M2KB2 Voltage setting
3 x 1 header, pitch 2.00mm
JRTC1
Clear CMOS
3 x 1 header, pitch 2.00mm
Connectors
Label
Function
Note
JFPT1/2
Miscellaneous setting connector 1/2
5 x 2 header, pitch 2.54mm
SODIMM1/2
206-pin DDR4 SO-DIMM socket
JFAUD1
Front Audio connector
6 x 2 header, pitch 2.00mm
JBKL1/2
LCD Inverter connector
5 x 1 wafer, pitch 2.00mm

User’s Manual
EMX-ADLP-B1 User’s Manual
19
JSPI1
SPI connector
4 x 2 header, pitch 2.00mm
JESPI1
JESPI connector
6 x 2 header, pitch 2.00mm
JCOM1/2/3/4
Serial Port 1/2/3/4 connector
5 x 2 header, pitch 2.00mm
JDIO1
General purpose I/O connector
10 x 2 header, pitch 2.00mm
SPK1
Speaker connector
4 x 1 wafer, pitch 2.00mm
LVDS1
LVDS Connector
20 x 2 wafer, pitch 1.25mm
EDP1
eDP_Panel connector
10 x 2 wafer, pitch 1.25mm
JUSB3/4
USB connector 3/4
5 x 2 header, pitch 2.54mm
LAN1/2
RJ-45 Ethernet 1/2
BT1
Battery connector
2 x 1 wafer, pitch 1.25mm
M2KE1
M.2 2230 Type E Slot
M2KB1
M.2 2242 Type B Slot
M2KB2
M.2 3052/3042/2242 Type B Slot
DP1/2
DP connector 1/2
JRS485_1/2
Serial Port 1/2 RS485/422 Mode
connector
3 x 2 header, pitch 2.00mm
JEC1
JEC connector
3 x 1 header, pitch 2.00mm
DCIN1
DC Power-in connector
PWR1
Power connector
2 x 2 wafer, pitch 4.20mm
SATA1/2
Serial ATA connector 1/2
SPWR1
SATA Power connector 1
4 x 1 wafer, pitch 2.54mm
EXT_SIM
SIM card slot
Can Only use either one slot, not
both at the same time.
INT_SIM
SIM card slot
CPU_FAN1
CPU fan connector
4 x 1 wafer, pitch 2.54mm
PCIE1
PCle connector
JUSB1/2
USB connector 1/2

EMX-ADLP-B1 User’s Manual
20 EMX-ADLP-B1 User’s Manual
2.3 Setting Jumpers & Connectors
2.3.1 Serial port 1/2 pin9 signal select (JRI1/JRI2)
* Default
Ring*
+5V
+12V
2.3.2 LVDS Back Light power selection (JSBKL1)
* Default
PWM Mode*
DC Mode
JRI2
JRI1