Avalue Technology EMX-BSWB User manual

Part No. E2047EMWB01R
EMX-BSWB
Intel® Celeron® Processor N3160
Thin Mini ITX Motherboard
User’s Manual
2nd Ed –26 April 2019

EMX-BSWB User’s Manual
2 EMX-BSWB User’s Manual
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A
COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN
RADIATE RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL
INTERFERENCE TO RADIO COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time.
For detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2019 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the prior written
permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or
masks work rights to these products, and makes no representations or warranties that

User’s Manual
EMX-BSWB User’s Manual
3
these products are free from patent, copyright, or mask work right infringement, unless
otherwise specified. Applications that are described in this manual are for illustration
purposes only. Avalue Technology Inc. makes no representation or warranty that such
application will be suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for
surgical implant into body, or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can
be reasonably expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose
failure to perform can be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure
reliable performance in the harsh and demanding conditions typical of industrial
environments. Whether your new Avalue device is destined for the laboratory or the factory
floor, you can be assured that your product will provide the reliability and ease of operation
for which the name Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual
first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

EMX-BSWB User’s Manual
4 EMX-BSWB User’s Manual
Product Warranty
Avalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by
persons other than repair personnel authorized by Avalue, or which have been subject to
misuse, abuse, accident or improper installation. Avalue assumes no liability under the
terms of this warranty as a consequence of such events. Because of Avalue’s high
quality-control standards and rigorous testing, most of our customers never need to use our
repair service. If any of Avalue’s products is defective, it will be repaired or replaced at no
charge during the warranty period. For out-of-warranty repairs, you will be billed according
to the cost of replacement materials, service time, and freight. Please consult your dealer
for more details. If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example,
CPU type and speed, Avalue’s products model name, hardware & BIOS
revision number, other hardware and software used, etc.) Note anything
abnormal and list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material
authorization) number from your dealer. This allows us to process your good
return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement
Order Card and a photocopy proof of purchase date (such as your sales
receipt) in a shippable container. A product returned without proof of the
purchase date is not eligible for warranty service.
5. Write the RMA number visibly on the outside of the package and ship it
prepaid to your dealer.

User’s Manual
EMX-BSWB User’s Manual
5
Content
1. Getting Started............................................................................................................8
1.1 Safety Precautions....................................................................................................8
1.2 Packing List...............................................................................................................8
1.3 Document Amendment History .................................................................................9
1.4 Manual Objectives...................................................................................................10
1.5 System Specifications.............................................................................................11
1.6 Architecture Overview—Block Diagram..................................................................14
2. Hardware Configuration...........................................................................................15
2.1 Product Overview....................................................................................................16
2.2 Jumper and Connector List.....................................................................................17
2.3 Setting Jumpers & Connectors ...............................................................................19
2.3.1 SATA/MSATA slot selector (JP1/2/3/4).......................................................................................... 19
2.3.2 LCD power voltage setting (LCD_VOL_SEL2) .............................................................................. 19
2.3.3 LVDS 6/8bit and Dual or single LVDS selection (JLVDS1)............................................................ 20
2.3.4 Clear CMOS (CLR_CMOS)............................................................................................................ 21
2.3.5 Flash BIOS ME connector (ME_PROTECT).................................................................................. 21
2.3.6 Inverter connector (INVERTER1)................................................................................................... 22
2.3.7 Serial port 1 connector (COM_A)................................................................................................... 22
2.3.8 SATA Power connector 1 (HDD_PWR1)....................................................................................... 23
2.3.9 SATA Power connector 2 (HDD_PWR2)....................................................................................... 23
2.3.10 Power input connector (JDCIN1)............................................................................................... 24
2.3.11 Battery connector (BAT1) .......................................................................................................... 24
2.3.12 USB 2.0 connector (FUSB20_1)................................................................................................ 25
2.3.13 USB 2.0 connector (FUSB20_2)................................................................................................ 25
2.3.14 Front Audio connector (F_AUDIO1) .......................................................................................... 26
2.3.15 LVDS connector (LVDS_CON1)................................................................................................ 26
2.3.16 Speaker connector (SPEAKERS1)............................................................................................ 27
2.3.17 Front Panel connector (F_PANEL)............................................................................................ 27
2.3.18 CPU fan connector (CPU_FAN) ................................................................................................ 28
2.3.19 System fan connector (SYS_FAN) ............................................................................................ 28
2.3.20 VGA port connector (VGA_CON1) ............................................................................................ 29
3.BIOS Setup....................................................................................................................30
3.1 Introduction .............................................................................................................31
3.2 Starting Setup .........................................................................................................31
3.3 Using Setup ............................................................................................................32
3.4 Getting Help............................................................................................................33

EMX-BSWB User’s Manual
6 EMX-BSWB User’s Manual
3.5 In Case of Problems................................................................................................33
3.6 BIOS setup..............................................................................................................34
3.6.1 Main Menu...................................................................................................................................... 34
3.6.1.1 System Language.................................................................................................................. 35
3.6.1.2 System Date.......................................................................................................................... 35
3.6.1.3 System Time.......................................................................................................................... 35
3.6.2 Advanced Menu ............................................................................................................................. 35
3.6.2.1 APCI Settings ........................................................................................................................ 36
3.6.2.2 NCT5567D-B Super IO Configuration................................................................................... 37
3.6.2.3 Hardware Monitor.................................................................................................................. 37
3.6.2.4 S5 RTC Wake Settings.......................................................................................................... 38
3.6.2.5 Serial Port Console Redirection ............................................................................................ 39
3.6.2.6 CPU Configuration................................................................................................................. 39
3.6.2.6.1 Socket 0 CPU Information..................................................................................................... 40
3.6.2.6.2 CPU Thermal Configuration .................................................................................................. 41
3.6.2.7 SATA Configuration............................................................................................................... 41
3.6.2.8 Miscellaneous Configuration ................................................................................................. 42
3.6.2.9 Network Stack Configuration................................................................................................. 43
3.6.2.10 CSM Configuration ................................................................................................................ 43
3.6.2.11 USB Configuration................................................................................................................. 44
3.6.3 Chipset.......................................................................................................................................... 45
3.6.3.1 North Bridge........................................................................................................................... 45
3.6.3.1.1 Intel IGD Configuration.......................................................................................................... 46
3.6.3.2 South Bridge.......................................................................................................................... 47
3.6.3.2.1 Azalia Configuration .............................................................................................................. 47
3.6.3.2.2 USB Configuration................................................................................................................. 48
3.6.3.2.3 PCI Express Configuration .................................................................................................... 49
3.6.4 Security......................................................................................................................................... 51
3.6.4.1 Secure Boot menu................................................................................................................. 52
3.6.4.1.1 Key Management................................................................................................................... 53
3.6.5 Boot .............................................................................................................................................. 53
3.6.6 Save and exit................................................................................................................................ 54
3.6.6.1 Save Changes and Reset...................................................................................................... 55
3.6.6.2 Discard Changes and Reset.................................................................................................. 55
3.6.6.3 Restore Defaults.................................................................................................................... 55
3.6.6.4 Launch EFI Shell from filesystem device .............................................................................. 55
4. Drivers Installation.......................................................................................................56
4.1 Install Chipset Driver...............................................................................................57
4.2 Install VGA Driver....................................................................................................58
4.3 Install TXE Driver....................................................................................................59

User’s Manual
EMX-BSWB User’s Manual
7
4.4 Install Audio Driver (For Realtek ALC662 HD Audio)..............................................60
4.5 Install LAN Driver (For Realtek RTL8111F) ............................................................61
5. Mechanical Drawing ....................................................................................................62

EMX-BSWB User’s Manual
8 EMX-BSWB User’s Manual
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EMX-BSWB motherboard
2 x SATA cables
1 x I/O Shield
2 x SATA power cables

User’s Manual
EMX-BSWB User’s Manual
9
1.3 Document Amendment History
Revision
Date
By
Comment
1st
January 2017
Avalue
Initial Release
2nd
April 2019
Avalue
Update Jumper and Connector List

EMX-BSWB User’s Manual
10 EMX-BSWB User’s Manual
1.4 Manual Objectives
This manual describes in details Avalue Technology EMX-BSWB Single Board.
We have tried to include as much information as possible but we have not duplicated
information that is provided in the standard IBM Technical References, unless it proved to
be necessary to aid in the understanding of this board.
We strongly recommend that you study this manual carefully before attempting to set up
EMX-BSWB or change the standard configurations. Whilst all the necessary information is
available in this manual we would recommend that unless you are confident, you contact
your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that
make booting impossible. If this should happen, clear the CMOS settings, (see the
description of the Jumper Settings for details).
If you have any suggestions or find any errors regarding this manual and want to inform us
of these, please contact our Customer Service department with the relevant details.

User’s Manual
EMX-BSWB User’s Manual
11
1.5 System Specifications
System
CPU
Intel® Celeron® Processor N3160 (2M Cache, up to 2.24 GHz)
BIOS
AMI uEFI BIOS, 64 Mbit SPI Flash ROM
I/O Chip
NuvoTon NCT5567D
System Memory
2 x 204-pin DDR3L1600 MTs SODIMMs, up to 8GB
Watchdog Timer
H/W Reset, 1sec. –65535sec./ step
H/W Status
Monitor
System temperature monitoring
Voltages monitoring
Fan status with auto Throttling control
Expansion
1 x full size Mini PCI-e support mSATA only (SATA III and mSATA Switchable
Through jumper)
1 x half size Mini PCI-e support WiFi module
S3/S4
Yes (S0/S3/S4/S5)
I/O
USB
2 x USB 3.0, 5 x USB 2.0
Display
Chipset
Intel® Atom™/ Celeron® SoC integrated Graphics
Resolution
HDMI : 3840 x 2160 @ 30Hz
2CH LVDS: 1920 x 1200 @ 60Hz
eDP to LVDS Converter (Parade PS8625)
VGA : 2560 x 1600 @ 60 Hz
HDMI + LVDS + VGA
Multiple Display
Triple Display
Audio
AC97 Codec
RealTek ALC662 HD Audio Decoding Controller
Audio Amp
RealTek ALC105 Stereo Class-D 3W x 2
Ethernet
LAN Chip
2 x USB 3.0, 5 x USB 2.0
Ethernet
Interface
10/100/1000 Gigabit Ethernet
Internal I/O Connectors
External I/O
Connector
Storage:
- 1 x full size Mini PCI-e support mSATA and Mini PCI-e only
- 1 x half size Mini PCI-e support WiFi Module
- 1 x 3 x 4 pin pitch 2.54mm connector for SATA/ mSATA solution (SATA III and
mSATA Switchable Through jumper)

EMX-BSWB User’s Manual
12 EMX-BSWB User’s Manual
- 1 x 1 x 4 pin, pitch 2.54mm SATA power connectors
- 1 x 1 x 4 pin, pitch 2.00mm SATA power connectors
COM:
- 1 x 2 x 5 pin, pitch 2.54mm connector for COM1 support RS-232 connector, Pin 9
without power
1 x 1 x 5 pin, pitch 2.54mm connector for 1 USB 2.0
1 x 2 x 5 pin, pitch 2.54mm connector for 2 USB2.0
1 x horizontal type battery connector
1 x 2 x 5 pin, pitch 2.54mm connector for front panel
1 x 2 x 15 pin, pitch 2.00mm connector for LVDS
1 x 1 x 6 pin, pitch 2.00mm Wafer connector for inverter
1 x 2 x 3 pin, pitch 2.00mm connector for LVDS 6/8bit dual or single channel or VESA
or JEIDA selection.
1 x 5 pin, pitch 2.00mm connector for LCD power voltage setting ( 3.3V/ 5V/ 12V)
1 x 2 x 5 pin, pitch 2.54mm connector for front Audio
1 x 4 pin, pitch wafer 2.00mm wafer connector for 3W x 2 Speaker
1 x 3 pin, pitch 2.54mm connector for CIR
1 x 2 pin, pitch 2.54mm connector for CMOS clear
1 x 2 pin pitch 2.54mm connector for flash BIOS ME
1 x 1 x 4 pin, pitch 2.54mm CPU fan connector with smart fan function supported
1 x 1 x 3 pin pitch 2.54mm system Fan
1 x 2 x 2 pin, pitch 4.20mm connector for power input connector
1 x 1 x 12 pin pitch 2.00mm connector for VGA port
Fanless Operating
Rear I/O Connectors
USB
2 x USB 3.0, 2 x USB 2.0
LAN
1 x RealTek RTL8111F Gigabit Ethernet
Rear Side
External I/O
Connector
1 x RJ-45
2 x USB 3.0 connectors
2 x USB 2.0 connectors
1 x VGA
1 x HDMI 1.4b
1 x Mic-In and 1 x Line-out
1 x DC Jack connector type
S/ PDIF
Mechanical & Environmental
Power
Requirement
DC in +12V
ACPI
Single power ATX Support S0, S3, S4, S5
ACPI 3.0 Compliant

User’s Manual
EMX-BSWB User’s Manual
13
Power Type
ATX mode
Operating Temp.
0 ~ 60°C (32~140°F)
Storage Temp.
-40 ~ +75°C
Operating
Humidity
0%~90% relative humidity, non-condensing
Size (L x W)
6.7" x 6.7" (170mm x 170mm)
Weight
0.40 kg
OS Support
MS Win 7,Win 8.1,Win 10
(listed in accordance with Intel document)
Note:
Specifications are subject to change without notice.

EMX-BSWB User’s Manual
14 EMX-BSWB User’s Manual
1.6 Architecture Overview—Block Diagram
The following block diagram shows the architecture and main components of EMX-BSWB.

User’s Manual
EMX-BSWB User’s Manual
15
2. Hardware
Configuration

EMX-BSWB User’s Manual
16 EMX-BSWB User’s Manual
2.1 Product Overview

User’s Manual
EMX-BSWB User’s Manual
17
2.2 Jumper and Connector List
You can configure your board to match the needs of your application by setting jumpers. A
jumper is the simplest kind of electric switch.
It consists of two metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1,
2, and 3. In this case, you would connect either two pins.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers.
Connectors on the board are linked to external devices such as hard disk drives, a
keyboard, or floppy drives. In addition, the board has a number of jumpers that allow you to
configure your system to suit your application.
If you have any doubts about the best hardware configuration for your application, contact
your local distributor or sales representative before you make any changes.
The following tables list the function of each of the board’s jumpers and connectors.
Jumpers
Label
Function
Note
JP1/2/3/4
SATA1/MSATA slot selector
3 x 4 header, pitch 2.54mm
JLVDS1
LVDS 6/8bit and Dual or single LVDS
selection
2 x 3 header, pitch 2.00mm
LCD_VOL_SEL2
LCD power voltage setting
1 x 5 header, pitch 2.00mm
CLR_CMOS
Clear CMOS
1 x 2 header, pitch 2.54mm
Connectors
Label
Function
Note
CPU_FAN
CPU fan connector
4 x 1 wafer, pitch 2.54mm
SYS_FAN
System fan connector
3 x 1 wafer, pitch 2.54mm
ME_PROTECT
Flash BIOS ME connector
1 x 2 header, pitch 2.54mm
INVERTER1
Inverter connector
1 x 6 wafer, pitch 2.00mm

EMX-BSWB User’s Manual
18 EMX-BSWB User’s Manual
DIMMA1/A2
204-pin DDR3L SODIMM socket
F_AUDIO1
Front Audio connector
6 x 2 header, pitch 2.54mm
F_PANEL
Front Panel connector
2 x 5 header, pitch 2.54mm
COM_A
Serial Port 1 connector
5 x 2 header, pitch 2.54mm
SPEAKERS1
Speaker connector
1 x 4 wafer, pitch 2.00mm
LVDS_CON1
LVDS Connector
2 x 15 header, pitch 2.00mm
USB1
2 x USB 2.0 connector
USB2
2 x USB 3.0 connector
FUSB20_1
USB 2.0 connector
1 x 5 header, pitch 2.54mm
FUSB20_2
USB 2.0 connector
2 x 5 header, pitch 2.54mm
SPDIF1
Sony/Philips Digital Interface
LAN1
RJ-45 Ethernet
BAT1
Battery connector
2 x 1 wafer, pitch 1.25mm
MSATA1
Full size mPCIe Slot
MINIPCIE1
Mini-PCIe connector
DCIN1
DC Power-in connector
JDCIN1
Power input connector
2 x 2 wafer, pitch 4.20mm
SATA1/2
Serial ATA connector 1/2
HDD_PWR1
SATA Power connector 1
4 x 1 wafer, pitch 2.54mm
HDD_PWR2
SATA Power connector 2
4 x 1 wafer, pitch 2.00mm
HDMI1
HDMI connector
B_OUT1
Line-out audio jack
B_MIC1
Mic-in audio jack
VGA1
VGA connector
VGA_CON1
VGA port connector
1 x 12 header, pitch 2.00mm

User’s Manual
EMX-BSWB User’s Manual
19
2.3 Setting Jumpers & Connectors
2.3.1 SATA/MSATA slot selector (JP1/2/3/4)
* Default
Note:
SATA1/MSATA1 shared SATA signal can not be used
simultaneously.
SATA1 Connector *
(SATA1 Connector enabled, MSATA1 slot
Disabled)
MSATA1 mPCIe slot
(MSATA1 slot enabled, SATA1 Connector
(Disabled)
2.3.2 LCD power voltage setting (LCD_VOL_SEL2)
* Default
+5V*
+3.3V
+12V
JP3
JP1
JP4
JP2

EMX-BSWB User’s Manual
20 EMX-BSWB User’s Manual
2.3.3 LVDS 6/8bit and Dual or single LVDS selection (JLVDS1)
* Default
Note:
Pin 1 & 3 & 5 for 6bit or 8bit VESA or JEIDA selection.
Pin 2 & 4 & 6 for dual or single channel LVDS selection.
8bit VESA*
8bit JEIDA
NC 6bit
Pin 2 & 4 NC for dual channel LVDS
Pin 2 & 4 Close for single channel
LVDS