Avalue Technology EMX-QM77 User manual

Part No. E2047EMXQ00R
EMX-QM77
Intel® QM77 with Intel Core™ i7/ i5/ i3 Pentium/Celeron
Mobile CPU Mini-ITX Motherboard
User’s Manual
1st Ed –23 July 2012

EMX-QM77 User’s Manual
2 EMX-QM77 User’s Manual
FCC Statement
THIS DEVICE COMPLIES WITH PART 15 FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE.
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED INCLUDING
INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS
FOR A CLASS "A" DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES.
THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES, USES, AND CAN RADIATE RADIO
FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH
THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS.
OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY TO CAUSE
HARMFUL INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO
CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.
Notice
This guide is designed for experienced users to setup the system within the shortest time. For
detailed information, please always refer to the electronic user's manual.
Copyright Notice
Copyright 2012 Avalue Technology Inc., ALL RIGHTS RESERVED.
No part of this document may be reproduced, copied, translated, or transmitted in any form or
by any means, electronic or mechanical, for any purpose, without the prior written permission
of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Avalue Technology Inc. reserves the right to make changes, without notice, to any product,
including circuits and/or software described or contained in this manual in order to improve
design and/or performance. Avalue Technology assumes no responsibility or liability for the
use of the described product(s), conveys no license or title under any patent, copyright, or

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
3
masks work rights to these products, and makes no representations or warranties that these
products are free from patent, copyright, or mask work right infringement, unless otherwise
specified. Applications that are described in this manual are for illustration purposes only.
Avalue Technology Inc. makes no representation or warranty that such application will be
suitable for the specified use without further testing or modification.
Life Support Policy
Avalue Technology’s PRODUCTS ARE NOT FOR USE AS CRITICAL COMPONENTS IN
LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE PRIOR WRITTEN APPROVAL
OF Avalue Technology Inc.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are intended for surgical
implant into body, or (b) support or sustain life and whose failure to perform, when properly
used in accordance with instructions for use provided in the labeling, can be reasonably
expected to result in significant injury to the user.
2. A critical component is any component of a life support device or system whose failure to
perform can be reasonably expected to cause the failure of the life support device or
system, or to affect its safety or effectiveness.
A Message to the Customer
Avalue Customer Services
Each and every Avalue’s product is built to the most exacting specifications to ensure reliable
performance in the harsh and demanding conditions typical of industrial environments.
Whether your new Avalue device is destined for the laboratory or the factory floor, you can be
assured that your product will provide the reliability and ease of operation for which the name
Avalue has come to be known.
Your satisfaction is our primary concern. Here is a guide to Avalue’s customer services. To
ensure you get the full benefit of our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products. So if you run into
technical difficulties, we are here to help. For the most frequently asked questions, you can
easily find answers in your product documentation. These answers are normally a lot more
detailed than the ones we can give over the phone. So please consult the user’s manual first.
To receive the latest version of the user’s manual; please visit our Web site at:
http://www.avalue.com.tw/

EMX-QM77 User’s Manual
4 EMX-QM77 User’s Manual
If you still cannot find the answer, gather all the information or questions that apply to your
problem, and with the product close at hand, call your dealer. Our dealers are well trained
and ready to give you the support you need to get the most from your Avalue’s products. In
fact, most problems reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from Avalue’s engineers every business day.
We are always ready to give advice on application requirements or specific information on the
installation and operation of any of our products. Please do not hesitate to call or e-mail us.
Headquarters and Branch
Avalue USA
Avalue Technology Inc.
7F, 228, Lian-cheng Road, Zhonghe Dist.,
New Taipei City 235, Taiwan
Tel:[phone]
Fax: [phone]
Information:sa[email protected].tw
Service: [e-mail]
Avalue Technology Inc.
9 Timber Lane, Marlboro, NJ 07746-1443
Tel: [phone]
Fax: [phone]
Information: [e-mail]
Service: [e-mail]
BCM Advanced Research
Avalue Europe
BCM Advanced Research
an Avalue Company
7 Marconi, Irvine, CA92618
Tel: [phone]
Fax: [phone]
Information: [e-mail]
Web: www.bcmcom.com
Avalue Europe A/S
Moelledalen 22C, 3140
Aalsgaarde, Denmark
Tel: [phone]
Fax:[phone]
Information: sales.e[email protected].tw
Service: [e-mail]
Avalue China
Avalue Japan
Avalue Technology Inc.
Room 805, Building 9,No.99 Tianzhou Rd.,
Caohejing Development Area,
Xuhui District, Shanghai
Tel: [phone]
Fax:[phone]
Information: sales.chi[email protected].cn
Service: [e-mail]
Avalue Technology Inc.
3F Ishiyama-Bldg, 1-6-1 Taito,
Taito-Ku, Tokyo 110-0016 Japan
Tel: [phone]
Fax: [phone]
Information: sales.japa[email protected].tw
Service: [e-mail]

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
5
Product Warranty
Avalue warrants to you, the original purchaser, that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products which have been repaired or altered by persons
other than repair personnel authorized by Avalue, or which have been subject to misuse,
abuse, accident or improper installation. Avalue assumes no liability under the terms of this
warranty as a consequence of such events. Because of Avalue’s high quality-control
standards and rigorous testing, most of our customers never need to use our repair service. If
any of Avalue’s products is defective, it will be repaired or replaced at no charge during the
warranty period. For out-of-warranty repairs, you will be billed according to the cost of
replacement materials, service time, and freight. Please consult your dealer for more details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For example, CPU type and
speed, Avalue’s products model name, hardware & BIOS revision number, other
hardware and software used, etc.) Note anything abnormal and list any on-screen
messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your manual, product, and any
helpful information available.
3. If your product is diagnosed as defective, obtain an RMA (return material authorization)
number from your dealer. This allows us to process your good return more quickly.
4. Carefully pack the defective product, a complete Repair and Replacement Order Card
and a photocopy proof of purchase date (such as your sales receipt) in a shippable
container. A product returned without proof of the purchase date is not eligible for
warranty service.
5. Write the RMA number visibly on the outside of the package and ship it prepaid to your
dealer.

EMX-QM77 User’s Manual
6 EMX-QM77 User’s Manual
Contents
1. Getting Started...............................................................................................................9
1.1 Safety Precautions.......................................................................................................9
1.2 Packing List..................................................................................................................9
1.3 Document Amendment History ..................................................................................10
1.4 Manual Objectives......................................................................................................11
1.5 System Specifications................................................................................................12
1.6 Architecture Overview –Block Diagram.....................................................................14
2. Hardware Configuration..............................................................................................15
2.1 Product Overview.......................................................................................................16
2.2 Before you Proceed ...................................................................................................18
2.3 Motherboard Overview...............................................................................................18
2.3.1 Placement Direction......................................................................................................................... 18
2.3.2 Screw Holes..................................................................................................................................... 19
2.3.3 Motherboard Layout......................................................................................................................... 20
2.4 Jumper and Connector List........................................................................................21
2.4.1 Internal Connectors............................................................................................................................ 22
2.5 Central Processing Unit (CPU).....................................................................................23
2.5.1 Installing the CPU............................................................................................................................. 24
2.5.1.1 Locate the CPU socket on the motherboard.....................................................................................24
2.5.1.2 Separate CPU cooler and its base first by screw drawer................................................................24
2.5.2 Installing the CPU Heatsink and Fan................................................................................................. 27
2.6 System Memory ...........................................................................................................28
2.6.1 Overview ............................................................................................................................................ 28
2.6.2 Memory Configurations...................................................................................................................... 29
2.6.3 Installing a SO-DIMM......................................................................................................................... 29
2.6.4 Removing a SO-DIMM....................................................................................................................... 32
2.7 Expansion Card..........................................................................................................33
2.7.1 Installing an Expansion Card ............................................................................................................. 33
2.7.2 Configuring an Expansion Card ......................................................................................................... 33
2.7.3 PCI Express x16 slot.......................................................................................................................... 34
2.7.4 MINI PCI Express............................................................................................................................... 34
2.7.5 CFast Card......................................................................................................................................... 35
2.8 Jumper settings and Connectors................................................................................36
2.8.1 Clear CMOS (JCMOS1)................................................................................................................... 36
2.8.2 COM2, COM3, RI/+5V/+12V Select (JCOMPWR2 JCOMPWR3 ).................................................. 37

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
7
2.8.3 LVDS Back Light power selection (JLVDS_BKL1)...........................................................................37
2.8.4 AT/ATX Power Mode Select (JPSON) .............................................................................................38
2.8.5 Rear panel connectors .....................................................................................................................38
2.8.6 CPU and System fan connectors (CPU_FAN1, SYS_FAN1) ..........................................................39
2.8.7 System Panel (F_PANEL)................................................................................................................40
2.8.8 ATX power connectors (ATXPWR, ATX12V1).................................................................................41
2.8.9 Serial Port connectors (COM2, COM3)............................................................................................42
2.8.10 GPIO Connector (JGPIO)..............................................................................................................42
2.8.11 Audio Mic.-In & Line-Out Connector (FPAUD1) ...........................................................................43
2.8.11.1 Signal Description –Audio connector (FPAUD1)............................................................................. 43
2.8.12 LVDS Connector (LVDS1)................................................................................................................44
2.8.13 LCD Inverter Connector (JBKL) .......................................................................................................45
2.8.14 SPI Connector (JPI_CN1) ................................................................................................................46
2.8.15 LPC Connector (JLPC).....................................................................................................................46
2.8.16 Serial ATA 3 Connector (SATA1, SATA2) ......................................................................................47
2.8.17 Serial ATA II Connector (SATA3 , SATA4 , SATA5).......................................................................47
2.8.18 USB connectors (USB56, USB78, USB910, USB1112,) ...............................................................48
3. BIOS Setup......................................................................................................................49
3.1 Introduction ................................................................................................................50
3.2 Starting Setup ............................................................................................................50
3.3 Using Setup ...............................................................................................................51
3.3.1 List Box...............................................................................................................................................51
3.3.2 Sub-menu...........................................................................................................................................51
3.4 BIOS setup.................................................................................................................52
3.4.1 Main Menu..........................................................................................................................................53
3.4.2 Advanced BIOS Setup .......................................................................................................................54
3.4.3 PCI Subsystem Setting ......................................................................................................................55
3.4.4 ACPI Settings.....................................................................................................................................56
3.4.5 Trusted computing..............................................................................................................................57
3.4.6 CPU configuration ..............................................................................................................................58
3.4.7 SATA Configuration............................................................................................................................59
3.4.8 Intel TXT(LT) Configuration................................................................................................................60
3.4.9 PCH-FW Configuration.......................................................................................................................61
3.4.10 AMT Configuration.........................................................................................................................62
3.4.11 USB Configuration .........................................................................................................................63
3.4.12 Super IO Configuration ..................................................................................................................64
3.4.12.1 Serial Port 1 configuration .......................................................................................................65
3.4.12.2 Serial Port 2 configuration .......................................................................................................66
3.4.12.3 Serial Port 3 configuration .......................................................................................................67
3.4.13 Smart Fan Mode Configuration....................................................................................................68

EMX-QM77 User’s Manual
8 EMX-QM77 User’s Manual
3.4.14 Option ROM Policy.......................................................................................................................... 69
3.4.15 CPU PPM Configuration.................................................................................................................. 71
3.4.16 Chipset............................................................................................................................................. 72
3.4.16.1 System Agent (SA) Configuration ........................................................................................... 72
3.4.16.1.1 LCD Control ....................................................................................................................................74
3.4.16.1.2 NB PCIe Configuration..................................................................................................................77
3.4.17 Memory Configuration ................................................................................................................... 79
3.4.18 PCH-IO Configuration.................................................................................................................... 80
3.4.19 USB Configuration......................................................................................................................... 82
3.4.20 Boot................................................................................................................................................ 83
3.4.21 Security.......................................................................................................................................... 84
3.4.22 Save & Exit .................................................................................................................................... 85

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
9
1. Getting Started
1.1 Safety Precautions
Warning!
Always completely disconnect the power cord from your
chassis whenever you work with the hardware. Do not
make connections while the power is on. Sensitive
electronic components can be damaged by sudden power
surges. Only experienced electronics personnel should
open the PC chassis.
Caution!
Always ground yourself to remove any static charge before
touching the CPU card. Modern electronic devices are very
sensitive to static electric charges. As a safety precaution,
use a grounding wrist strap at all times. Place all electronic
components in a static-dissipative surface or static-shielded
bag when they are not in the chassis.
1.2 Packing List
Before you begin installing your single board, please make sure that the
following materials have been shipped:
1 x EMX-QM77 Mini-ITX Motherboard
1 x CD-ROM contains OS drivers/QIG/User’s Manual
2 x COM cable (9-pin)
1 x SATA cable (2 in 1,7-pin)
1 x I/O shield

EMX-QM77 User’s Manual
10 EMX-QM77 User’s Manual
1.3 Document Amendment History
Revision
Date
Comment
1st
July 2012
Initial Release

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
11
1.4 Manual Objectives
This manual describes in detail the Avalue Technology EMX-QM77 motherboard Board.
We have tried to include as much information as possible but we have not duplicated
information that is provided in the standard IBM Technical References, unless it proved to be
necessary to aid in the understanding of this board.
We strongly recommend that you study this manual carefully before attempting to interface
with EMX-QM77 series or change the standard configurations. Whilst all the necessary
information is available in this manual we would recommend that unless you are confident,
you contact your supplier for guidance.
Please be aware that it is possible to create configurations within the CMOS RAM that make
booting impossible. If this should happen, clear the CMOS settings, (see the description of
the Jumper Settings for details).
If you have any suggestions or find any errors concerning this manual and want to inform us
of these, please contact our Customer Service department with the relevant details.

EMX-QM77 User’s Manual
12 EMX-QM77 User’s Manual
1.5 System Specifications
System
CPU
Intel Core i7/ i5/ i3 Pentium®/ Celeron® Mobile CPU
BIOS
AMI 64Mb SPI ROM
System Chipset
Intel QM77
I/O Chipset
Nuvoton NCT6776F
Memory
Two 204-pin SODIMM support up to 16GB dual channel DDR3 1600/ 1333
SDRAM, Non-ECC
Watchdog Timer
Reset: 1 to 255 sec/min per step
H/W Status Monitor
Monitoring temperature, voltage and cooling fan status. Auto throttling control
when CPU overheats.
Expansion Slots
1 PCI-E x 16 Gen. 3, 1 Mini PCI-E, 1 CFast
Power State
S1, S3, S4, S5
TPM
TPM 1.2 by Infineon SLB9635
RAID
RAID 0, 1, 5 and 10
Wake up / Boot on LAN
LAN (WOL,PXE)
Smart Fan Control
Yes
Display
Chipset
Intel GMA HD 4000 /2500 (22nm) , 3000/2000(32nm)
Display Memory
Shared Memory, up to 256MB
Dual Display
VGA + LVDS, VGA + HDMI, VGA + DVI, LVDS + HDMI, LVDS + DVI, HDMI + DVI
VGA
Onboard, supports max resolution 2048 x 1536 (@75Hz)
LVDS
Onboard 24-bit LVDS, supports max resolution 1920 x 1200
HDMI
Onboard HDMI 1.3, supports max resolution 1920 x 1200
DVI
Onboard DVI-D, supports max resolution 1920x1200
LVDS Backlight
Yes
Audio
Audio Codec
Realtek AL892, 5.1 Channel HD Audio
Audio Interface
Line-in, line-out, Mic-in, S/PDIF Out, Front Audio Header
Ethernet
LAN1
Intel 82579LM GbE LAN supports iAMT 8.0
LAN2
Intel 82583V GbE LAN
Back Panel I/O Port

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
13
Back Panel I/O Port
1 PS/2 Keyboard
1 PS/2 Mouse
1 VGA Port
1 HDMI Port
1 COM RS-232 Port
1 DVI Port
4 USB 3.0 Ports
2 LAN RJ45 Ports
1 Audio I/O(3 Jacks)
Internal I/O Connector
Internal I/O Connector
4 USB Connectors support 8 USB Ports,
2 COM RS-232 Connectors
5 SATA Connectors (2 SATA 3.0, 3 SATA II),
1 Front Audio Connector,
1 Front Panel , Connector,
1 CPU Fan Connector
1 System Fan Connector
1 S/PDIF Out Connector
1 Mini PCI-E Connector,
1 CFast Connector,
1 LVDS Connector,
1 LVDS Backlight Power Connector,
1 Keyboard Mouse Header
1GPIO Connector
Mechanical & Environmental
Power Requirement
+12V (11A), +5V (21A), +3.3V (18A), -12V (0.3A), 5VSB (2.5A)
Power Type
ATX (supports AT Mode)
Power Connector
1 20-pin ATX Power Connector,
1 4-pin ATX 12V Power Connector
Operating Temperature
0°C to 60°C (32°F to 140°F)
Operating Humidity
0% to 90% relative humidity, non-condensing
Size (L x W)
6.69" x 6.69" (170 x 170mm)
Weight
0.77 lbs (0.35 Kg)
* Specifications are subject to change without notice.

EMX-QM77 User’s Manual
14 EMX-QM77 User’s Manual
1.6 Architecture Overview –Block Diagram
The following block diagram shows the architecture and main components of EMX-QM77.

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
15
2. Hardware
Configuration

EMX-QM77 User’s Manual
16 EMX-QM77 User’s Manual
2.1 Product Overview
Supports latest Intel rPGA988 CPU-socket interface processor, the 3rd Generation Intel®
Core i3, i5, i7, Pentium ,Celeron mobile processors which are built on 22/32 nm technologies
to provide smart performance and responsiveness on executing tasks, It combines the CPU
and GPU to offer fantastic HD media and graphics, especially on 3D gaming experience.
Doubles the bandwidth of your system memory up to 21GB/s and pumps up the system
performance at lower power.
DMI (Direct Media Interface) architecture connects between the processor and chipset at
5.0Gb/s which twice the speed of previous version. The exceptionally increased interconnect
bit rate from 2.5Gb/s up to 5.0Gb/s would effectively eliminates the bottle neck of the system
performance and brings the most terrific computing experience from the present to the future.
There are 2 of 5 SATA ports running at speed up to 6.0Gb/s, and each port can connect with
any other SATA 3.0Gb/s devices for backward compatibility. It supports RAID 0(Striped disk
array), RAID 1(Mirroring disk array), RAID 5(Block Interleaved Distributed Parity), RAID 10 (A
Stripe of Mirrors).
The MB also provides users the performance and protection. It is integrated 5.1-channel HD
Audio CODEC delivering advanced multi-channel audio and bringing you the experience of
home theater-quality sound. Delivers transfer speed ten times faster than conventional
Gigabit Ethernet connections, supporting a high transfer rate up to Gigabit/s. Gigabit LAN is
the networking standards for the future and is ideal for handing large amount of data such as
video, audio, and voice. Supports TPM 1.2.
2.1.1 Platform Features and Benefits
•Integrated Gfx (Intel® HD Graphics 4000/3000) with enhanced operating modes to enable
excellent graphics performance in power and cost sensitive embedded applications
• DirectX® 11 & Open CL 1.1 let you enjoy awesome graphics performance, stunning 3D
visual effect and dynamic interactivity
•Memory support, integrated low voltage DDR3 memory controller
•Operating system support:
- Windows XP 32 bit / 64 bit
- Windows 7 32 bit / 64 bit
- Fedora core Linux16 32bit / 64 bit
-Red Hat Enterprise Linux 6.0 i386vg
2.1.2 Key Architecture Features
•Supports Intel rPGA988 CPU, the 3’rd Generation Intel® Core i3, i5, i7 Mobile processors.

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
17
- 22/32nm monolithic die
- Integrated Gfx (Intel® HD Graphics 4000/3000) & memory controller
- 4 &2 Cores, up to 8MB Cache
- HW accelerated video CODECs
- Compatible with high speed DDR3-1600
- PCIe* (CPU): Gen 3.0, 8GT/s, **
- TDP: 17W-45W
•Intel® Turbo Boost Technology
-More efficient power sharing between CPU and Graphics
•Intel® Hyper-Threading Technology
•Intel® Advanced Vector Extensions (Intel® AVX)
•Intel® AES-New Instructions
•Integrated Display Interfaces
- VGA
- LVDS
- HDMI
- DVI
•Intel® HD Graphics 4000/3000
- DirectX® 11
- Improved realism for DX 3D applications. Improved rendering.
- OpenCL 1.1
- Improved realism for OGL 3D based application
- UVD (Unified Video Decoder) 2.01
Hardware decode of most common HD codecs (MPEG-2, H.264/AVC MPEG-4 and
VC-1)
- Supports ATI Hybrid CrossFireXTM Technology2
•Intel Quick Sync Video
- Enables faster and higher quality video editing, recording and sharing
•TPM
- Support TPM 1.2
• I/O
- PCI Express® x 16 PCIE 3.0 8GT/s
- Mini PCI Express® x 1Gen 2.5GT/s
- CFast connector SATA II interface
- Five SATA ports (2 port of SATA 3.0 and 3 ports of SATA II) support RAID 0,1, 5, 10
- Gigabit Ethernet Media Access Controller (GbE MAC)
IPv4 and IPv6 Checksum Offload
- High Definition Audio
- USB: 3.0, up to 4 ports
- USB: 2.0, up to 8 ports

EMX-QM77 User’s Manual
18 EMX-QM77 User’s Manual
- SMBus 2.0
- LPC Bus
Supports SPI devices
- Hardware Monitor
Fan control (Voltage, Temp)
Watchdog timer
2.2 Before you Proceed
Take note of the following precautions before you install motherboard components or change
any motherboard settings.
Unplug the power cord from the wall socket before touching any
component.
Use a grounded wrist strap or touch a safely grounded object or a
metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity
Hold components by the edges to avoid touching the ICs on
them.
Whenever you uninstall any component, place it on a grounded
anti-static pad or in the bag that came with the component.
Before you install or remove any component, ensure that the ATX
power supply is switched off or the power cord is detached from
the power supply. Failure to do so may cause severe damage to
the motherboard, peripherals, and/or components.
2.3 Motherboard Overview
Before you install the motherboard, study the configuration of your chassis to ensure that the
motherboard fits into it. Refer to the chassis documentation before installing the motherboard.
Make sure to unplug the power cord before installing or removing the
motherboard. Failure to do so can cause you physical injury and
damage motherboard components.
2.3.1 Placement Direction
When installing the motherboard, make sure that you place it into the chassis in the correct
orientation. The edge with external ports goes to the rear part of the chassis as indicated in
the image below.

EMX-QM77 User’s Manual
EMX-QM77 User’s Manual
19
2.3.2 Screw Holes
Place four (4) screws into the holes indicated by circles to secure the motherboard to the
chassis.
Place this side towards the rear of the
chassis.
Do not over tighten the screws! Doing so can damage the
motherboard.

EMX-QM77 User’s Manual
20 EMX-QM77 User’s Manual
2.3.3 Motherboard Layout