Avantco CO14 User manual

User Manual
www.AvantcoEquipment.com 1
Countertop Convection Ovens
Models: CO14, CO12
Please read and keep these instructions. Indoor use only.
09/2013
User Manual

User Manual
2 www.AvantcoEquipment.com
Important Safety Informaon ������������������������������������������������������������� 3
Idencaon of Key Parts ������������������������������������������������������������������� 4
Idencaon of Accessories ���������������������������������������������������������������� 4
Before Using Your Oven����������������������������������������������������������������������� 5
Using Your Oven ���������������������������������������������������������������������������������� 5
Typical Operaon Sequence ���������������������������������������������������������������� 5
Timer��������������������������������������������������������������������������������������������������� 6
Temperature Control Knob ������������������������������������������������������������������ 6
Power and Temperature Indicator Light����������������������������������������������� 6
Protecon Component ������������������������������������������������������������������������ 6
Cleaning and Maintaining Your Oven ��������������������������������������������������� 6
Specicaons �������������������������������������������������������������������������������������� 7
Index

User Manual
www.AvantcoEquipment.com 3
IMPORTANT SAFETY INFORMATION
When using electrical appliances, basic safety precauons should always be followed,
including the following:
1. Read all instructions carefully and completely.
2. For commercial use only.
3. Do not touch hot surfaces.
4. Protect against electrical shock by keeping all cords, plugs, and other electrical
components away from water or other liquids.
5. Unplug this unit when not in use and before cleaning.
6. Allow the unit to cool before putting on or taking off parts.
7. Do not operate this or any appliance with a damaged electrical cord or plug.
8. Do not operate this or any appliance after it has malfunctioned or been damaged in
any way.
9. Do not use outdoors.
10. Do not place on or near a hot gas or electric burner.
11. Attach plug to appliance first, then plug electrical cord into the wall outlet.
12. Disconnect the unit by turning any control to “O,” then remove electrical plug from the
wall outlet.
13. Do not use appliance for any application other than intended use.
14. Do not insert metal utensils or oversized foods into this unit as they may cause a fire
and heighten the risk of electrical shock.
15. Do not store any item on top of this unit when in operation.
16. Do not allow this oven to touch or be covered by flammable material, such as
curtains, draperies, walls, etc., when in operation.
17. Do not clean with metal scouring pads as pieces can break off and touch electrical
components, heightening the risk of electrical shock
18. Never place materials such as paper, cardboard, plastic, etc. in this oven.
19. Do not cover crumb tray or any other part of this unit with metal foil as it may cause
the oven to overheat.
20. Avoid scratching the surface or nicking the edges of this unit’s tempered, safety glass
door. If the oven door has a scratch or nick, contact customer service before use.
21. Turn appliance off by setting the TIMER control to the “O” position.
22. Note that the use of accessories not recommended by the manufacturer may result in
injury.
NOTE: Save these instructions for future reference.

User Manual
4 www.AvantcoEquipment.com
Identification of Key Parts
Identification of Accessories
Roasting Racks

User Manual
www.AvantcoEquipment.com 5
BEFORE USING YOUR OVEN
Before cooking anything in your oven for the rst me, please follow these simple instrucons:
Using a small amount of detergent, wash the handle and roasng racks with soapy water. (NOTE: Do
not use a spray or abrasive polishing agent.) Gently wipe down interior walls with a damp cloth.
While washing this unit, do not to touch the electric heang element. Do not soak the inside of the
oven with water.
Aer washing and thoroughly drying the surfaces noted above, place the roasng racks back inside
the oven.
Close the oven door and preheat the oven to its highest temperature seng for 5 minutes.
Turn o the heang elements and open the oven door in order to remove any smoky residue from
inside the oven. The heang elements are well lubricated and this inial use will help burn o the
extra grease. A light amount of smoke is normal during this process.
Using Your Oven
CAUTION: During the baking process, make sure that no metal accessory comes in contact with
the electric heang elements.
CAUTION: Foods baked in this oven will be hot. Wear protecve hand coverings when reaching
into oven to retrieve food.
Typical Operation Sequence
ACTION RESULT
Plug in your oven Power indicator light comes on
Adjust temperature control know to desired seng Temperature indicator light comes on; heang ele-
ments begin to heat up
Indicator light shuts o Oven has reached desired temperature
Load product into oven Product will begin to cook
Set mer to desired cook me between 0-120 min. Timer starts ming down, the fan and heang ele-
ments resume operaon
Timer reaches zero Oven chimes; fan and heang elements shut o
Unload oven Product will be cooked/hot; use cauon removing it
from the oven

User Manual
6 www.AvantcoEquipment.com
Timer
The range of the mer on this unit is 0-120 minutes. Turning the mer to the "0" posion will cut o
the power, and the oven will stop operaon.
If you need to reset the baking me while the oven is in operaon, simply turn the mer to a new
posion. The oven will reset the me according to the revised requirement without needing to be
turned o.
When the set baking me has been reached, the oven will chime and the heang elements will
automacally shut o.
Cleaning & Maintaining Your Oven
To clean, rst remove the power cord’s plug from the wall outlet. Wait for the oven to cool. Use a
damp cloth or sponge to gently wipe down the inside of the oven. Avoid soaking the inside of the
oven or washing it in running water as this will cause serious damage to the unit.
Temperature Control Knob
The temperature range of this unit is 0-450 degrees Fahrenheit. This thermostac switch controls the
temperature inside the oven and helps to maintain the proper temperature during various heang,
roasng, and baking applicaons.
Power & Temperature Indicator Light
Anyme this appliance is connected to the power supply, the power indicator light will be on.
If you turn the mer knob, the fan motor will begin to operate.
If you turn the temperature control knob, the heang elements will begin to operate, and the
temperature indicator light will automacally turn on.
Protection Component
If the temperature of this oven reaches an unsafe limit, the electrical components will shut o and it
will stop operang in order to prevent overheang.

User Manual
www.AvantcoEquipment.com 7
Limited Warranty
All equipment, which is sold under Avantco trademark and used for commercial purpose is warranted
against defects in materials and workmanship. The warranty runs for six months from the date
of original installaon and is for the benet of the original purchaser only. All other Warranes,
Expressed or Implied, Statutory or Otherwise, including Without Limitaon any implied Warranty of
Merchantability or Fitness for Purposes are excluded. The Seller shall in no event be liable for direct,
indirect or consequenal damages in connecon with Avantco commercial products.
This warranty is not eecve if damage occurs because of accident, carelessness, improper
installaon, lack of proper set– up, supervision when required or if the equipment is installed or
operated in any manner contrary to the installaon and operang instrucons. Work performed by
unauthorized personnel or unauthorized service agencies voids this Warranty.
This warranty does not apply to, and Avantco is not responsible for, any warranty claims made on
products sold or used outside of the United States.
Specifications
Troubleshooting
Problem: The oven does not become hot aer being switched on.
• Be sure that the mer switch is set.
• Be sure that the temperature control knob is set.
Problem: There is a metallic sound when the oven is in use.
• Do not aempt to dismantle the oven.
• Contact your service agent right away to examine the fan.
Problem: Food is oen overcooked or burned, even when cooked according to the recipe.
• Check that the fan motor is operang normally.
• Contact your service agent to examine the temperature control knob.
MODEL # POWER SUPPLY DIMENSIONS UNIT WEIGHT
177CO14 120 120V 60Hz 1440W 18¾"W x 18"D x 15"H 35 lbs. (40 lbs. shipping)
177CO12 120 120V 60Hz 1600W 23"W x 22¼"D x 16½"H 53 lbs. (62 lbs. shipping)