Avanti FFFD150H3S User manual

Model / Modelo / Modelé: FFFD150H3S
REFRIGERATOR / FREEZER
REFRIGERADOR / CONGELADOR
RÉFRIGÉRATEUR / CONGÉLATEUR
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves
the right to change materials and specifications without notice.
Avanti Products LLC
P.O. Box 520604
Miami, FL 33152
www.avantiproducts.com

2
TABLE OF CONTENTS
Appliance Safety
3
Important Safeguides
4
Help Us Help You
5
Parts and Features
6
Important Safety Instructions
7
Installation Instructions
7
Before Using Your Appliance
7
Installation of Your Appliance
7
Electrical Connection
8
Operating Your Appliance
9-11
Care and Maintenance
12
Cleaning Your Appliance
12
Power Failure / Vacation Time, Moving Your Appliance
12
Energy Saving Tips
12
Troubleshooting Guide
13
Service for Your Appliance
14
Your Avanti Products Warranty
15
Instrucciones en Español
17 – 22
Instructions en Français
23 - 36
Registration Information and Registration Card
Last
Page

3
APPLIANCE SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your
appliance. Always read and obey all safety messages.
This is the Safety Alert Symbol.
This symbol alerts you to potential
hazards that can kill or injure you
and others.
All safety messages will follow the
Safety Alert Symbol and either
the wards” DANGER”,
“WARNING” or “CAUTION”.
Danger means that failure to heed
this safety statement may result in
severe personal injury or death.
Warning means that failure to
heed this safety statement may
result in extensive product
damage, serious personal injury,
or death.
Caution means that failure to
heed this safety statement may
result in minor or moderate
personal injury, or property or
equipment damage.
All safety messages will alert you to what the potential hazard is, tell you how to
reduce the chance of injury, and let you know what can happen if the
instructions are not followed.
PROP. 65 WARNING FOR CALIFORNIA RESIDENTS
WARNING:
Cancer And Reproductive Harm
www.p65warnings.ca.gov

4
IMPORTANT SAFEGUARDS
Before the beverage cooler is used, it must be properly positioned and
installed as described in this manual, so read the manual carefully. To
reduce the risk of fire, electrical shock or injury when using the beverage
cooler, follow basic precautions, including the following:
·
Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and
do not use an extension cord
• Replace all panels before operating
• It is recommended that a separate circuit, serving only your beverage cooler, be provided. Use
receptacles that cannot be turned off by a switch or pull chain
• Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or
explosion. And do not store or use gasoline or other flammable vapors and liquids in the vicinity
of this or any other appliance. The fumes can create a fire hazard or explosion.
• Before proceeding with cleaning and maintenance operations, make sure the power line of the
unit is disconnected.
• Do not connect or disconnect the electric plug when your hands are wet
• Unplug the appliance or disconnect the power before cleaning or servicing. Failure to do so can
result in electrical shock or death.
• Do not attempt to repair or replace any part of your appliance unless it is specifically
recommended in this material. All other servicing should be referred to a qualified technician.
• Use two or more people to move and install the appliance. Failure to do so can result in back or
other injury.
• To ensure proper ventilation for your appliance, the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above 550F (130C) and below 900F (32 0C). This
unit must be installed in an area protected from the elements, such as wind, rain, water spray or
sunlight.
• The appliance should not be located next to ovens, grills or other sources of high heat.
• The appliance must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (115 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the appliance.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the appliance to be leveled in order to work properly. You may need to make
several adjustments to level it.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installation.
• Check for leaks after connection.
• Never allow children to operate, play with or crawl inside the appliance
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may
damage or discolor the interior.
• Do not use this apparatus for other than its intended purpose.

5
HELP US HELP YOU...
Read this guide carefully.
It is intended to help you operate and
maintain your new appliance properly.
Keep it handy to answer your questions.
If you don't understand something or you
need more help, please call:
Avanti Customer Service
800-220-5570
Keep proof of original purchase date
(such as your sales slip) with this guide to
establish the warranty period.
Writedown the model and serial numbers.
You'll find them on a plate located on the rear outside
wall of the appliance.
Please write these numbers here:
_____________________________________
Date of Purchase
_____________________________________
Model Number
_____________________________________
Serial Number
Use these numbers in any correspondence or service
calls concerning your appliance.
If you received a damaged appliance, immediately
contact the dealer (or builder) that sold you the
appliance.
Save time and money. Before you call for service,
check the Troubleshooting Guide. It lists causes of
minor operating problems that you can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you
to be pleased. If for some reason you are
not happy with the service you receive,
here are some steps to follow for further
assistance.
FIRST, contact the people who serviced
your appliance. Explain why you are not
pleased. In most cases, this will solve the
problem.
NEXT, if you are still not pleased, write all the details,
including your telephone number, and send it to:
Customer Service
Avanti Products
10880 NW 30 Street
Miami, FL33172USA
CAUTION:
THIS APPLIANCE IS NOT
DESIGNED FOR THE
STORAGE OF MEDICINE OR
OTHER MEDICAL
PRODUCTS.

6
PARTS AND FEATURES
1
Interior Light
5
Vegetable Crisper
2
Egg Tray
6
Upper Freezer Drawer
With Removable Tray
3
Door Bins (3 Each Door)
(2) Standard Bins Each Door
(1) Gallon Bin Each Door
7
Lower Freezer Drawer
4
Refrigerator Shelves
8
Leveling legs

7
IMPORTANT SAFETY INSTRUCTIONS
~
WARNING
~
To reduce the risk of fire, electrical shock,
or injury when using your refrigerator
-freezer, follow these basic precautions:
•Read all instructions before using the refrigerator-freezer.
•DANGER or WARNING: Risk of child entrapment.
Child entrapment and suffocation are not problems of the past. Junked or
abandoned refrigerator-freezers are still dangerous. . . even if they will “just sit in the
garage a few days.”
•Before you throw away your old refrigerator-freezer: Take off the doors. Leave
the shelves in place so that children may not easily climb inside.
•Never allow children to operate, play with, or crawl inside the refrigerator-freezer.
•Never clean refrigerator-freezer parts with flammable fluids. The fumes can create a
fire hazard or explosion.
•Do not store or use gasoline or any other flammable vapors and liquids in the vicinity
of this or any other refrigerator-freezer. The fumes can create a fire hazard or
explosion.
-Save these instructions-
INSTALLATION INSTRUCTIONS
ØBefore Using Your Appliance
lRemove the exterior and interior packing.
lCheck to be sure you have all the following parts:
l
2 Glass Refrigerator Shelves
l
Egg Tray
l
1 Vegetable Crispers
l
Removable Freezer Drawer Tray
l1 Glass Crisper Cover
lInstruction Manual
l
6 Refrigerator Door Bins
(4) Standard Bins
(2) Gallon Bottle Bins
l
•Before connecting the unit to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
•Clean the interior surface with lukewarm water using a soft cloth.
ØInstallation of Your Appliance
•Place your refrigerator-freezer on a floor that is strong enough to support the refrigerator-
freezer when it is fully loaded. To level your refrigerator-freezer, adjust the leveling legs at the
bottom of unit.
•ALLOW 5 INCHES OF SPACE BETWEEN THE BACK AND SIDES OF THE UNIT, WHICH
ALLOWS THE PROPER AIR CIRCULATION TO COOL THE COMPRESSOR AND
CONDENSER.
•Locate the unit away from direct sunlight and sources of heat (stove, heater, radiator, etc.).
Direct sunlight may affect the acrylic coating and heat sources may increase electrical
consumption. Extreme cold ambient temperatures may also cause the refrigerator- freezer not
to perform properly.
•Avoid locating the unit in moist areas.
•Plug the unit into an exclusive properly installed-grounded wall outlet. Do not under any
circumstances cut or remove the third (ground) prong from the power cord. Any questions
concerning power and/or grounding should be directed toward a certified electrician or an
authorized Avanti Products service center.

8
Electrical Connection
~Warning~
Improper use of the grounded plug can result in the risk of electrical shock. If the power
cord is damaged, have it replaced by an authorized Avanti Products service center.
This appliance should be properly grounded for your safety. The power cord of this
appliance is equipped with a three-prong plug
which mates with standard three
prong wall outlets to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the
power cord supplied.
This appliance requires a standard 115Volts~/60Hz electrical outlet with three-prong
ground.
The cord should be secured behind the appliance and not left exposed or dangling
to prevent accidental injury.
Never unplug the appliance by pulling the power cord. Always grip the plug firmly
and pull straight out from the receptacle.
Do not use an extension cord with this appliance. If the power cord is too short, have
a qualified electrician or service technician install an outlet near the appliance.
EXTENSION CORD
Because of potential safety hazards under certain conditions, it is strongly
recommended that you do not use an extension cord with this unit. However, if you
must use an extension cord it is absolutely necessary that it be a UL/CUL-Listed,
3-wire grounding type appliance extension cord having a grounding type plug and
outlet and that the electrical rating of the cord be 115 volts and at least 10
amperes.
SURGE PROTECTOR
Most electrical appliances use a series of electric control boards to operate.
These boards are very susceptible to power surges and could be damaged or
destroyed.
If the appliance is going to be used in an area or if your city / country is prone to
power surges / outages; it is suggested that you use a power surge protector for all
electrical devices / appliances you use. The surge protector that you select must
have a surge block high enough to protect the appliance it is connected to. If you
have any questions regarding the type and size of surge protector needed contact
a licensed electrician in your area.
Damages due to power surges are not considered a manufacturer covered defect
and will void your product warranty.

9
OPERATING YOUR APPLIANCE
ØTemperature Control Panel
ØSetting the Temperature Control
•Your refrigerator has one control for regulating the temperature. The temperature control is located
on the outside of the refrigerator compartment door.
•The first time you turn the unit on, the unit will start at the default temperature set at the factory,
38ºF in the refrigerator section and -08ºF in the freezer section.
•The first time you turn the unit on, adjust the temperature in the refrigerator compartment to 34ºF
and run for at least 4 hours before placing foods inside.This will ensure the freezer cabinet is
thoroughly chilled and the refrigerator compartment will be stabilized before food is placed. Then
adjust the temperature setting to your desired setting that best suits your needs.
To adjust the temperature in each zone, press the Temp Zone button, the selected zone will flash
on and off.
Press the Temp button to select the desired temperature and then press the OK button to activate
the setting. (Temperature will cycle in 1ºF increments with each press of the button).
Refrigerator temperature range: OFF – 43ºF
Freezer temperature range: -11 – 3ºF

10
PREPROGRAMMED FUNCTIONS:
•SABBATH MODE
The Sabbath mode is designed for those whose religious observances require turning off the lights.
All interior lights and control panel indicators will be disabled.
To enable the SABBATH MODE, press the function button until the SABBATH MODE icon is
flashing and press the OK button to activate. The control panel and interior lights will turn off and
will remain in the SABBATH MODE until it is deactivated on the control panel
To disable the SABBATH MODE, press and hold the function button for approximately 3 seconds
until the control panel lights up again. And you can also unplug the power cord for approximately
10 seconds then, plug in the power cord, the refrigerator SABBATH MODE will be deactivated. The
icon will turn off and all lights and indicators will return to the normal operation.
•FAST FREEZE MODE
This mode will set the freezer temperature to -26ºF / -32ºC for quick temperature drop when storing
large amounts of warm or room temperature foods in the freezer.
The unit will remain in FAST FREEZE mode until the temperature reaches-26ºF / -32ºC and will
then return to the original setting or until the function is turned off at the control panel.
To enable the FAST FREEZE mode, press the function button until the FAST FREEZE icon is
flashing and press the OK button to activate. The icon will remain illuminated.
To disable the FAST FREEZE mode, press the function button until the FAST FREEZE icon is
flashing and press the OK button to deactivate. The icon will turn off.
•VACATION MODE
Use this mode when leaving for long periods of time, where you will remove the large majority of
the content from the refrigerator section but leave the freezer content.
The Vacation mode will automatically set the refrigerator section at 57ºF and the freezer section
remain at your current setting.
The unit will remain in the VACATION MODE until it is deactivated at the control panel.
To enable the VACATION MODE, press the function button until the VACATION MODE icon is
flashing and press the OK button to activate. The icon will remain illuminated.
To disable the VACATION MODE, press the function button until the VACATION MODE icon is
flashing and press the OK button to deactivate. The icon will turn off.
•SMART (AUTOMATIC) MODE
Use this mode to automatically set the unit at normal average operating temperatures.
The SMART MODE will automatically set the refrigerator section at 38ºF and the freezer section at
-0ºF. The unit will remain in the SMART MODE until it is deactivated at the control panel.
The temperatures cannot be adjusted when in the SMART (AUTOMATIC) MODE.
To enable the SMART MODE, press the function button until the SMART MODE icon is flashing
and press the OK button to activate. The icon will remain illuminated.
To disable the SMART MODE, press the function button until the SMART MODE icon is flashing
and press the OK button to deactivate. The icon will turn off.
Once you have disabled the SMART MODE, set the temperature manually as indicated previously
in this manual to a temperature that better suits your needs.

11
•CONTROL PANEL – CHILD LOCK
The CONTROLPANEL LOCK is designed to prevent any changes to the settings to the refrigerator.
To enable the CHILD LOCK, press and hold the OK button for approximately 3 seconds, the CHILD
LOCK icon will turn on. The control panel will be locked until unlocked at the control panel or there
is a loss of power.
To disable the CHILD LOCK, press and hold the OK button for approximately 3 seconds until the
CHILD LOCK icon turns off and the control panel is working in normal operation mode.
•CONTROL PANEL – STANDBY
The CONTROL PANEL will do dark after approximately 5 minutes of no activity
To activate the control panel, press and hold the OK button for approximately 3 seconds, the
CONTROL PANEL AND CHILD LOCK icon will turn on. The control panel will be locked until
unlocked at the control panel or there is a loss of power.
To disable the CHILD LOCK, press and hold the OK button for approximately 3 seconds until the
CHILD LOCK icon turns off and the control panel is working in normal operation mode.
NOTE:
•IF THE UNIT IS UNPLUGGED, HAS LOST POWER, OR IS TURNED OFF, YOU MUST WAIT 3
TO 5 MINUTES BEFORE RESTARTING THE UNIT. IF YOU ATTEMPT TO RESTART BEFORE
THIS TIME DELAY, THE REFRIGERATOR-FREEZER WILL NOT START.
NOTE:
WE DO NOT RECOMMEND THE INSTALLATION OF THE REFRIGERATOR
WHERE THE TEMPERATURE WILL DROP BELOW 50ºF (13ºC) OR RISE ABOVE
110ºF (43ºC). THE COMPRESSOR WILL NOT BE ABLE TO MAINTAIN PROPER
TEMPERATURES INSIDE THE REFRIGERATOR.
FOR INSTALLATIONS WHERE THE TEMPERATURES WILL DROP BELOW 50º
SET THE FREEZER TEMPERATURE CONTROL TO THE “COLDEST” SETTING.
THIS WILL IMPROVE THE OPERATIONS OF THE REFRIGERATOR UNDER
THESE CONDITIONS.
ØAdjusting the Temperature in the Fresh Zone / Crisper
To adjust the temperature in the Fresh Zone / Crisper, simply move the temperature control (located
at the back of the unit just above the crisper) left to right. Temperature range is MAX to MIN.
MAX is the coldest
MIN is the Warmest

12
CARE AND MAINTENANCE
ØCleaning Your Appliance
•Unplug the unit, and remove the food and baskets.
•Wash the inside with a warm water and baking soda solution. The solution should be about 2
tablespoons of baking soda to a quart of water.
•Wash the baskets with a mild detergent solution.
•The outside of the unit should be cleaned with mild detergent and warm water.
CAUTION
Failure to unplug the refrigerator-freezer could result in electrical shock or personal injury.
ØPower Failure
Most power failures are corrected within a few hours and should not affect the temperature of your
refrigerator-freezer if you minimize the number of times the door is opened. If the power is going to be
off for a longer period of time, you need to take the proper steps to protect your food.
ØVacation Time
Short vacations: Leave the unit operating during vacations of less than three weeks.
Long vacations: If the appliance will not be used for several months, remove all food and unplug the
power cord. Clean and dry the interior thoroughly. To prevent odor and mold growth, leave the door
open slightly: blocking it open if necessary
ØMoving Your Appliance
•Remove all the food.
•Securely tape down all loose items inside your unit.
•Turn the leveling screws up to the base to avoid damage.
•Tape the door shut.
•Be sure the unit stays in the upright position during transportation.
ØEnergy Saving Tips
•The unit should be located in the coolest area of the room, away from heat producing appliances
or heating ducts, and out of direct sunlight.
•Let hot foods cool to room temperature before placing them in the unit. Overloading the unit forces
the compressor to run longer. Foods that freeze too slowly may lose quality, or spoil.
•Be sure to wrap foods properly, and wipe containers dry before placing them in the unit. This cuts
down on frost build-up inside the freezer.
•Organize and label food to reduce door openings and extended searches. Remove as many items
as needed at one time, and close the door as soon as possible.

13
ØPROBLEMS WITH YOUR APPLIANCE?
You can solve many common refrigerator-freezer problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling for service.
TROUBLESHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
Unit does not operate.
Not plugged in.
The circuit breaker tripped or there is a blown
fuse.
Compressor turns on and off frequently.
The room temperature is hotter than normal.
A large amount of food has been added to the
refrigerator - freezer.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The refrigerator -freezer does not have the
correct clearances.
Vibrations.
Check to assure that the refrigerator - freezer is
level.
The unit seems to make too much noise.
The rattling noise may come from the flow of the
refrigerant, which is normal.
As each cycle ends, you may hear gurgling
sounds caused by the flow of refrigerant in your
refrigerator - freezer.
Contraction and expansion of the inside walls
may cause popping and crackling noises.
The unit is not level.
The door will not close properly.
The unit is not level.
The door is reversed and not properly installed.
The gasket is dirty.
The baskets are out of position.
Error code E0 is shown in the display window
This indicates there has been a Refrigerator or
Freezer Sensor failure:
Contact Customer Service 1-800-220-5570
Error code E1 is shown in the display window
This indicates a freezer evaporator sensor failure
Contact Customer Service 1-800-220-5570
Error code EH is shown in the display window
This indicates an Ambient temperature sensor
failure.
Contact Customer Service 1-800-220-5570
Error code EC is shown in the display window
This indicates a communication error in the unit.
Contact Customer Service 1-800-220-5570
Error Code EF is shown in the display window
This indicates a fan alarm.
Contact Customer Service 1-800-220-5570

14
SERVICE FOR YOUR APPLIANCE
We are proud of our customer service organization and the network of professional service
technicians that provide service on your Avanti appliances. With the purchase of your Avanti
appliance, you can have the confidence that if you ever need additional information or assistance the
Avanti Products Customer Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323 5029
Whatever your questions are about our products,
help is available.
Part Orders
800-220 5570
You may order parts and accessories that will be
delivered directly to your home.
You may order these items by personal check,
money order, Master Card, or Visa.
In-Home Repair Service
800-220 5570
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.
WIRING DIAGRAM

15
YOUR AVANTI PRODUCTS
WARRANTY
Staple your sales receipt here. Proof of original
purchase date is needed to obtain service under
warranty.
WHAT IS COVERED – LIMITED ONE-YEAR WARRANTY
Avanti Products warrants that the product is free from defects in materials and/or workmanship for a period of
twelve (12) months from the date of purchase by the original owner. The foregoing timeline begins to run
upon the date of purchase, and shall not be stalled, tolled, extended, or suspended for any reason whatsoever
unless described in detail in the warranty document. For one year from the date of purchase by the original
owner, Avanti products will, at its option, repair or replace any part of the product which proves to be defective
in material or workmanship under normal use. Avanti Products will provide you with a reasonably similar
product that is either new or factory refurbished. During this period Avanti Products will provide all parts and
labor necessary to correct such defects free of charge, so long as the product has been installed and operated
in accordance with the written instructions in this manual. In rental or commercial use, the warranty period is
90 days. All Avanti appliances of 4.2 cubic feet capacity or less must be brought/sent to the appliance service
center for repair.
LIMITED SECOND THROUGH FIFTH YEAR WARRANTY
For the second through the fifth year from the date of original purchase, Avanti Products will provide a
replacement compressor free of charge due to a failure. You are responsible for the service labor and freight
charges. In rental or commercial use, the limited compressor warranty is one year and nine months. Costs
involved to move the product to the service center and back to the user’s home, as maybe required, are the
user’s responsibility.
WARRANTY EXCLUSIONS / WHAT IS NOT COVERED:
The warranty coverage described herein excludes all defects or damage that are not the direct fault of Avanti
Products, including without limitation, one or more of the following:
•
A failure to comply with any applicable state, local, city, or county electrical, plumbing and/or building codes,
regulations, or laws, including failure to install the product in strict conformity with local fire and building
codes and regulations.
•Any external, elemental and/or environmental forces and factors, including without limitation, rain, wind,
sand, floods, fires, mud slides, freezing temperatures, excessive moisture or extended exposure to
humidity, lightning, power surges, structural failures surrounding the appliance, and acts of God.
•
Content losses of food or other content due to
spoilage.
•Incidental or consequential damages
•Parts and labor costs for the following will not be
considered as warranty:
•Evaporator doors, door springs, and/or frames.
•Inner door panels, door shelves, door rails,
and/or door supports.
•Vegetable crispers.
•Light bulbs and/or plastic housing.
•Plastic cabinet liners.
•Punctured evaporator that voids the warranty on
the complete sealed system.
•Shipping and handling costs associated with the
replacement of the unit.
•Repairs performed by unauthorized servicers.
•Service calls that are related to external problems,
such as abuse, misuse, inadequate electrical
power, accidents, fire, floods, or any other acts of
God.
•Failure of the product if it is used for other than it
intended purpose.
•The warranty does not apply outside the
Continental USA.
•Surcharges including but not limited to, any after
hour, weekend, or holiday service calls, tolls, ferry
trip charges, or mileage expense for service calls
to remote areas.
In no event shall Avanti Products have any liability or responsibility whatsoever for damage to surrounding
property, including cabinetry, floors, ceilings, and other structures and/or objects around the product. Also
excluded from this warranty are scratches, nicks, minor dents, and other cosmetic damages on external
surfaces and exposed parts; Products on which the serial numbers have been altered, defaced or removed;
service visits for customer education, or visits where there is nothing wrong with the product; correction of
installation problems (you are solely responsible for any structure and setting for the product, including all
electrical, plumbing and/or other connecting facilities, for proper foundation/flooring, and for any alterations
including without limitation cabinetry, walls, floors, shelving etc., as well as the resetting of breakers or fuses.
OUT OF WARRANTY PRODUCT
Avanti Products is under no obligation, at law or otherwise, to provide you with any concessions, including
repairs, pro-rates, or product replacement, once this warranty has expired.
WARRANTY – REFRIGERATION - COMPRESSOR

16

17
INSTRUCCIONES EN ESPAÑOL
PRECAUCIÓN
Para reducir el riesgo de incendio, descarga
eléctrica, o daño cuando use su
electrodoméstico, siga las siguientes
precauciones.
•Lea todas las instrucciones antes de usar su electrodoméstico.
•Peligro o Precaución: Existe el riesgo que los niños queden atrapados.
•Niños atrapados o sofocamiento no son un problema del pasado. Los electrodomésticos
son peligrosos aún si solo los deja en el garaje por un par de días.
•Antes de desechar su electrodoméstico o refrigerador usado: quítele las puertas. Deje las
repisas en su lugar para evitar que los niños se queden atrapados.
•No permita que los niños manejen, jueguen o entren dentro del electrodoméstico.
•No limpie su electrodoméstico con líquidos inflamables. Los gases pueden ocasionar
fuego o una explosión.
•No guarde ni use gasolina u otros líquidos inflamables cerca de este o de cualquier otro
electrodoméstico. Los vapores pueden ocasionar fuego o explosión.
- Guarde estas instrucciones-
INSTRUCCIONES PARA LA INSTALACIÓN
Antes de usar su equipo
•Retire la envoltura interna y externa.
•Verifique que tenga las siguientes partes:
l
2 Repisas de vidrio
l
1 Bandeja para huevos
l
1 Gaveta para vegetales
l
1 Bandeja de congelador removable
l1 Tapa de vidrio para gaveta de
vegetales
l1 Manual de instrucciones
l
6 Bandejas de puerta en el
refrigerador
•Antes de conectar su electrodoméstico a la corriente eléctrica, ubíquelo en posición vertical sobre
una superficie plana por lo menos por 2 horas. Esto reducirá la posibilidad de malfuncionamiento
en el sistema de enfriamiento por el manipuleo durante el transporte.
•Limpie la superficie interior con agua tibia usando un trapo suave.
Instalación de su electrodoméstico
•Ubique su electrodoméstico en un piso que sea lo suficientemente fuerte para soportar su peso
cuando esté totalmente lleno o cargado. Para nivelar el electrodoméstico, ajuste las patas
delanteras.
•Deje aproximadamente 5 pulgadas de espacio entre la parte trasera y los costados de su
electrodoméstico, así permitirá la circulación de aire necesaria para enfriar el compresor.
•Mantenga su electrodoméstico alejado del aire caliente, vapor o líquidos que puedan salpicarlo, ya
que la unidad podría averiarse.
•Los rayos solares directos pueden malograr la capa acrílica, y las fuentes de calor pueden
ocasionar un aumento en el consumo eléctrico. Manténgalo lo más alejado posible del agua para
prevenir algún choque eléctrico. Evite los sitios húmedos y los ambientes extremadamente fríos
ya que esto puede afectar la eficiencia del enfriamiento de su electrodoméstico.
•Evite ubicar su electrodoméstico en áreas mojadas o muy húmedas.
•Conecte el electrodoméstico a un enchufe de pared exclusivo con conexión a tierra. Bajo ninguna
razón se debe retirar la tercera punta del enchufe. Cualquier consulta con respecto a la energía
y/o cable de tierra debe ser dirigida a un electricista certificado o autorizado por el Servicio Técnico
de Avanti Products.
Conexión eléctrica
Este electrodoméstico debe ser conectado a tierra. En el caso que ocurra un corto circuito, la
conexión a tierra reduce el riesgo de recibir un choque eléctrico ya que cuenta con un alambre

18
para el escape de la corriente eléctrica. Este electrodoméstico está equipado con un enchufe
que consta de tres puntas, la tercera punta es la conexión a tierra. Este enchufe debe ser
insertado a un enchufe de pared que este correctamente instalado con la conexión a tierra.
ADVERTENCIA
•El uso inapropiado del enchufe a tierra puede desencadenar un choque eléctrico. Consulte a
personal autorizado por Avanti Products si tiene alguna duda sobre las instrucciones o si tiene
alguna consulta si el electrodoméstico está correctamente instalado a la corriente eléctrica y a
tierra. Si el cordón del enchufe del electrodoméstico se encuentra dañado, debe ser reemplazado
por el Servicio Técnico de Avanti Products.
•El cordón del enchufe está equipado con tres puntas que encajan perfectamente en un enchufe de
pared standard para reducir el riesgo de un choque eléctrico.
•Bajo ninguna circunstancia corte o saque la tercera punta del enchufe que le proveemos ya que
este es para que vaya conectado a tierra.
•No use una extensión.
•La corriente de este electrodoméstico es de 115/120 voltios, tiene una salida eléctrica de 60 Hz. y
consta de un enchufe de tres puntas que va conectado al enchufe de pared.
•El cordón del enchufe debe ser asegurado atrás del electrodoméstico y no dejarlo expuesto para
evitar accidentes.
COMO CAMBIAR LA DIRECCION DE APERTURA DE LA PUERTA
En caso de que necesite cambiar el lado de apertura de la puerta, por favor consulte al servicio pos-
venta de su localidad.
ADVERTENCIA
No use agua hirviendo porque dañará las partes de plástico.
•Retire los alimentos del electrodoméstico y colóquelos en una caja térmica para conservarlos y
protegerlos.

19
FUNCIONAMIENTO DEL APARATO
Control de la temperatura del refrigerador
ØAjuste del control de temperatura
•Su refrigerador tiene un mando para regular la temperatura. El control de temperatura se encuentra
en el exterior de la puerta del compartimiento refrigerador.
•La primera vez que encienda la unidad, la unidad comenzará a la temperatura predeterminada
establecida en la fábrica, en la sección 38ºF refrigerador y -08ºF en la sección de congelados.
•La primera vez que encienda la unidad, ajustar la temperatura en el compartimiento del refrigerador
a 34ºF y una duración de por lo menos 4 horas antes de introducir los alimentos. Esto asegurará
que el congelador está muy frío y el compartimiento del refrigerador se estabilice antes de colocar
los alimentos. A continuación, ajustar la temperatura a la configuración deseada que mejor se
adapte a sus necesidades.
Para ajustar la temperatura en cada zona de prensa el botón de zona de temperatura, la zona
seleccionada se encenderá y se apagará.
Pulse el botón TEMP para seleccionar la temperatura deseada y pulse el botón OK para activar
el ajuste. (Ciclo de voluntad de temperatura en incrementos de 1 ° F con cada pulsación del
botón).
Rango de temperatura del refrigerador: OFF - 43ºF
Congelador rango de temperatura: -8 - 3 ºF

20
Funciones pre-programadas:
•MODO DE SABBATH
El modo de Sabbath está diseñado o aquellos cuyas prácticas religiosas requieren apagar las luces.
Todas las luces interiores y los indicadores del panel de control serán desactivados.
Para habilitar el Modo Sabbath, pulse el botón de función hasta que el icono de modo Sabbath es
parpadeando, luego pulse el botón OK para activar. El panel de control y las luces interiores se
apagarán y permanecerán en el modo Sabbath hasta que se desactive en el panel de control
Para desactivar el Modo Sabbath, pulse y mantenga pulsado el botón de función durante
aproximadamente 3 segundos hasta que el panel de control se ilumina de nuevo. Presione el botón
de función hasta que el icono de modo Sabatino parpadea y pulse el botón OK para desactivar.
Otro opción será desenchufar el refrigerador por aproximadamente 10 segundos, enchufe la unidad
de nuevo y el icono se apagará y todas las luces e indicadores volverá al funcionamiento normal.
•MODO DE CONGELACIÓN RÁPIDA
Este modo ajustar la temperatura del congelador a -26ºF para la caída rápida de la temperatura
cuando el almacenamiento de grandes cantidades de alimentos calientes o temperatura de
habitación en el congelador.
La unidad permanecerá en el modo de congelación rápida hasta que la temperatura llega a -26ºF
y entonces volverá a la configuración original o hasta que la función se apaga en el panel de control.
Para activar el modo de congelación rápida, pulse el botón de función hasta que el icono de
congelación rápida parpadea y pulse el botón OK para activar. El icono permanecerá iluminado.
Para desactivar el modo de congelación rápida, pulse el botón de función hasta que el icono de
congelación rápida parpadea y pulse el botón OK para desactivar. El icono se apagará.
•MODO VACACIONES
Utilice este modo al salir por largos períodos de tiempo, en las que se eliminará la gran mayoría
del contenido de la sección del refrigerador, pero deja el contenido del congelador.
El modo de vacaciones ajustará automáticamente la sección de refrigerador a 57ºF y la sección
del congelador permanecer en su configuración actual.
La unidad permanecerá en el modo de vacaciones hasta que se desactive en el panel de control.
Para activar el modo de vacaciones, pulse el botón de función hasta que el icono de modo de
vacaciones parpadea y pulse el botón OK para activar. El icono permanecerá iluminado.
Para desactivar el modo de vacaciones, pulse el botón de función hasta que el icono de modo de
vacaciones parpadea y pulse el botón OK para desactivar. El icono se apagará.
•SMART (AUTOMÁTICO) MODO
Use este modo para establecer automáticamente la unidad a temperaturas medias de
funcionamiento normales.
El modo Smart ajustará automáticamente la sección de refrigerador a 38ºF y la sección de
congelador a -0ºF. La unidad permanecerá en el modo Smart hasta que se desactive en el panel
de control.
Las temperaturas no se pueden ajustar en el modo de SMART (automático).
Para activar el modo Smart, pulse el botón de función hasta que el icono inteligente de modo
parpadea y pulse el botón OK para activar. El icono permanecerá iluminado.