AVAPOW A07 User manual

AVAPOW
Multi-function car jump starter
-User Manual-
Model: A07 EN

Friendly Tips:
Please read carefully the instruc-
tion manual so that you can be
familiar with the product more
conveniently and quickly!Please
use product correctly based on the
instruction manual.
Perhaps there is small difference
between the picture and the actual
product,so please turn to the
actual product for detail informa-
tion.
01

What's in the box
Specifications
AVAPOW jump starter x1
Intelligent battery clamps with starter cable x1
High quality type-C charging cable x1
User-friendly manual x1
Model number
Capacity
EC5 output
USB output
Type-C input
Charging time
LED light power
Working temperature
Dimension (LxWxH）
47.36Wh
A07
12V/1500A maximum starting power(max.)
5V/3A, 9V/2A, 12V/1.5A
5V/2A, 9V/2A
2.5-4 hours
White: 1W
-20 ℃~+60 ℃ / -4℉~+140℉
180*92*48.5mm
03

Product diagrams
Accessories
Power button
Output: 5V/3A, 9V/2A, 12V/1.5A
Type-C input: 5V/2A, 9V/2A
LED display
EC5 jump start output
LED light
Light button
Intelligent battery clamps with starter cable High quality type-C
charging cable
1
2
3
4
5
6
7
1
2
3
4
5
6
7
04

Charge the Jump Starter battery
LED Display
Charging with an AC adapter (Note:AC adapter
is not included).
1.Connect the battery input with Type-C cable.
2.Connect the Type-C cable to AC adapter.
3.Plug the AC adapter into a power source.
AC adapter
Type-C cable
100
Press the power button,the LED display shows as follows:
Show available battery
Input
05

How to Jump Start Your Vehicle
This unit is designed for jump starting 12V car batteries only and rated for
gasoline engines up to 7 liters and diesel engines up to 4 liters.Do not
attempt to jump start vehicles with a higher battery rating, or different
voltage.If the vehicle isn't started immediately, please wait for 1 minute to
allow device to cool down. Do not try to restart the vehicle after three
consecutive attempts as this may damage the unit. Check your vehicle for
other possible reasons why it can't be restarted.
First step: Second step: Third step: Fourth step:
Press the power
button to turn on
it,check the
battery shown on
the LED
display,then plug
jumper cable into
battery pack
outlet.
Connect the
jumper clamp to
car battery,red
clamp to
positive,black
clamp to negative
pole of car battery.
Turn on the car
engine to start car.
Pull the plug of
battery terminal
from jump starter
and remove
clamps from auto
battery.
Operating instructions
06

Jumper Clamp Indicator Instruction
Input low
voltage
protection
13.0V±0.3V The red light is always on, the green light is
off, and the buzzer does not sound.
Input high
voltage
protection
18.0V±0.5V The red light is always on, the green light is
off, and the buzzer does not sound.
Work instruction Support
When working normally,the green light is
always on, the red light is off, and the buzzer
beeps once.
Reverse
connection
protection
Support
The red/black clip of the wire clip is
reversely connected to the car battery
(battery voltage ≥0.8V), the red light is
always on, the green light is off, and the
buzzer sounds at short intervals.
Start timeout
protection 90S±10% The red light is always on, the green light is
always on, and the buzzer does not sound.
Short circuit
protection Support
When the red and black clips are
short-circuited, no sparks, no damage, the
red light is always on, the green light is off,
the buzzer 1 long and 2 short beeps.
Connect to the
high voltage
alarm
Support
The clip is mistakenly connected to battery
that is >16V, the red light is always on, the
green light is off, and the buzzer sounds
slowly and shortly.
Automatic
anti-virtual
electricity
function
Support
When the car battery voltage is higher than
the Starter battery voltage, the output is
automatically turned off and the green light
is on,at this time, it can be ignited normally.
If the car battery voltage drops and is lower
than the starter battery voltage during the
ignition process, the smart clip will
automatically turn on the output to complete
the startup process.
Item Technical
parameters Instruction
07

How to charge a mobile phone or digital
products?
Operating instruction
With powerful capacity and USB Quick Charger(5V/3A,9V/2A,12V/1.5A),it
can full charge your smart phones and tablets up to 75% faster than a
standard charger.
First step: Second step: Third step:
Plug the USB port of
the charging cable into
the product USB
Inset the other side
into the input port of
the mobile phone
Press the power
button,then check the
battery shown on the
LED display
08

LED flashlight
sos
Short press the Light Button to turn on the flashlight.The battery capacity
indicator lights up.Short press the light button again to scroll through the
lighting,Strobe,SOS.Short press again to turn off the flashlight.The
flashlight offers more than 35 hours of continuous use when fully charged.
Lighting Strobe light SOS off
Press the Light
Button shortly
Press the Light
Button shortly
Press the Light
Button shortly
Press the Light
Button shortly
LED Flashlight Light Button
09

Warranty Exemption
Safety Warning
1. Never short circuit the jump starter by connecting the Red and Black
clamps.
2. Do not disassemble the jump starter.
3. If you find swelling,leakage or odor,please stop using the jump starter
immediately.
4. Please use this starter at normal temperature and keep away from
humid,hot and fire places.
5. Do not start the vehicle continuously.There should be at least 30
seconds to 1 minute between two starts.
6. When the battery power is less than 10%,do not use the jump starter
otherwise the device will be damaged.
7. Before first use please charge it for 3 hours or more.
8. If the positive clamp of the starting power was incorrectly connected to
the negative poles of the car battery,the product comes with relevant
protective measures to avoid personal injury and property damage.
1. The product has been incorrectly operated or damaged due to the
following irresistible reasons (such as flood,fire,earthquake,
lightning,etc).
2. The product has been repaired,disassembled or modified by
non-manufacturer or non-manufacturer authorized technicians.
3. The problem caused by wrong charger does not match the product.
4. Beyond the product warranty period(24-month).
Note:
- For the first use, please make sure to fully charge before use.
- In normal use, please confirm that the unit has at least 50% power
before use.
10