AVE ATM Interface TCPIP232 User manual

OPERATIONMANUAL
June 15, 2006
ATM TCPIP Interface
TT
TT
TCPIP232CPIP232
CPIP232CPIP232
CPIP232

TCPIP232 Connections
There are 2 kinds of connection for TCPIP232
1. Stand alone with Digital Video Recorder
This connection will inteface directly to DVR which supported Text Insertion. This insertion will
interface via RS232C only from TCPIP232 rear panel.So Please consult your DVR manual or contact
DVR manufacturer.
2. VSSI-pro Interface
VSSI-Pro has also supported text insertion and programmable gray scale and background of text
inesertion. User are able to define the ATM IP Address via Onscreen programming on VSSI-Pro Menu.
Introduction TCPIP232 ATM Interface.
TCPIP232 ATM Interface is designed to capture ATM transactions on ATM LAN system then
convert caputered transactions to serial port to interface with VSSI-Pro (ATM Serial Interface)
or Digital Video Recorder (DVR) which supports text insertion and overlays trasaction informa-
tion to video.
PAGE 2
Figure 1. Stand alone connection
ATM
Camera
Rounter/Network
CAT-5
CAT-5
Video Coaxial
Video Coaxial
Serial
DVR
TCPIP232
Monitor
Figure 2. VSSI-Pro Interface

TCPIP232 Hardware Configuration:
TCPIP232hardwareoperationdependsonyournetworkconnection.TCPIP232isabletooperate
withHUBandNetworkSwitcher.Thereare 2hardwareconfigurations:
1. Mirror Mode
ThisModesupports HUB and Programmable Network Switchers.Theuserneedsto provide a
portforTCPIP232 to captureATMtransactions on the HUB and needs to mirror theATM LAN port
forTCPIP232 port to capturedata.This kind of switcherwecalled “ programmable networkswitcher”
whichisveryexpensive.
2. Tapping Mode.
TheTapping mode supportsHUBandTypicalNetwork Switcher.TapppingMode captures
ATM transactionsbytapping receivingdataat theATMonly. SoHUBand Switch willnot see
TCPIP232 as a network device. see Figure 3
Figure 3. TCPIP232 Hardware Silkscreen
JP7, JP15 JP16
JP6 1
Tapping Mode Setup. (This is defualt from manufacturer)
1. Close JP7 and JP15. Open JP16. (Lifted up Pin of C20 on Old PCB)
2. JP6 Close PIN5-6, PIN11-12
Mirror Mode Setup
1. Close JP7, JP15, JP16 ( Need to install C20)
2. JP16 Close Pin1-2, Pin3-4, Pin5-6,Pin7-8,Pin9-10,Pin11-12,Pin13-14,Pin15-16
2
PAGE 3

TCPIP232 Setups
Theusermust becarefulto unplugtheLAN cable fromtheATM.TheATMhas the
protectionwhenthere is nocomunicationbetweenthe ATM andHostServer in limited
timeyourATM will beoffline automatically. Thisperoid iscalledthe “ATMTime Out’.This
timeoutdepends on yourATM system.Itis approximately 6-10seconds.
Stand alone Setup:
ConnectthePC/DVR Cable which comesfromtheTCPIP232 adapter to your
laptop.Powerup your TCPIP232andyour laptop andrunTCPIP232 Setup toprogramthe
IPAddress oftheTCPIP232.ThisIP address willbethesame as theATMmachine.Un-
plugyourPC/DVR Cable from yourlaptopand plug it toyourDVR Com port. Nowyour
needtoprogram your DVRtodisplaytext insertion.
VSSI-Pro Setup
Connect theTCPIP232adapter to the VSSI-Prowiththe provided cable, connectvideo,
ATMLAN and powerupbothunits.
1.Enter theVSSI-Pro MainMenuby simultaneously pressingandholding theDOWNand
UPwhilethen press andreleasingRESET Button. Themainmenuwill be displayedas
below. So move cursor toATM Select by press UPor DOWN button. PressSETto enter
theATMSelectMenu.
MAIN PROGRAMMING MENU
*ATM SELECT
SCREEN SETUP
TEXTDISPLAY
COMMUNICATION
EXCEPTIONREPORT
ALARMOUTPUTS
TEST/DEMOMODE
DWN/UP LOAD SETUP
HELP
2.OnATMSelectMenu, Move cursortoTCPIPInterface thenpressSETtoenter
SDLC
BSYNC
ASYNC
CAMERAPORT
JOURNALPRINTER
*TCPIP INTERFACE
CUSTOM
EXIT
3.TheMenu inTCPIPInterface will bedisplayedas below:
*TCPIP FORMAT I
TCPIPDEBUGING
EXIT.
PAGE 4

TCPIP232 LED Indicators
GREEN POWER TCPIP-232Power Status
RED RECEIVE TCPIP-232ReceiveDatafromATM
GREEN LINK ATM Status, On = Ready/OFF = Not ready
YELLOW SPEED OFF = 10Mbps, On = 100Mbps Ethernet
Cables and Pin assignments:
TCPIP232-PC/DVR Cable
This is RS232 Cable. User uses to programming IPAddress on TCPIP232 and
thenremoveand pluge toDVRtoinsertASCIItexton Video.
TCPIP232Port PC/DVR Port
DB9 Female DB9 Female
Pin-5(GND)--------------------------------------------------Pin-5(GND)
Pin-2(RXD)---------------------------------------------------Pin-3(TXD)
Pin-3(TXD)---------------------------------------------------Pin-2(RXD)
TCPIP232-VSSI-Pro Cable
ThisisalsoRS232 Cable. User users usetointerfacewith VSSI-Pro. This cable
alsoprovidedreached alarm cable tointerfacewithalrm systems. and alsoincludedSerial
outputtoconnect withDVRto get textinsertion.This kind oftextinsertion willhelpuser to
usedittoserach video by serachingfromText . ThisfeatureisforAVE DVR only.
TCPIP232 VSSI-Pro DVR
Pin-5(GND)-------------------------Pin-5(GND)----------------------------Pin-5(GND)
Pin-2(RXD)-------------------------Pin-3(TXD)
Pin-3(TXD)-------------------------Pin-2(RXD)
Pin-8(CTS)-----------------------------Pin-2(RXD)
Pin-1(Alarm)
PAGE 5
4.SelectTCPIPFormatI to enter and ChangetheIPAddressthesameasATM’sIP
Address. Example, if theATM’s IP address is 192.168.0.141 So the address onTCPIP-
232Adapter thismenuas:
*IPADDRESS 1 192
IPADDRESS 2 168
IPADDRESS 3 0
IPADDRESS 4 141
EXIT
1. Exitofftoreturn to themainmenu then pressRESETbutton to operationmode.
2. Testyou transaction onATMto verify VSSI-ProandTCPIP-232Adapter’sOperation.

LIMITED WARRANTY
(Terms and Conditions)
For 2 Years from the date of shipment, Seller warrants to Buyer that the Product is free from defects in
material or workmanship under normal use and service. Equipment manufactured by other than Seller
but furnished by Seller carries the same warranty to Buyer as Seller receives from the other manufacturer,
notwithstanding any provision to the contrary. If Buyer has specified a particular manufacturer’s product
which is not the brand standardly supplied by Seller, Buyer shall look only to the other manufacturer’s
warranty and Seller shall not warrant such item.
EXCLUSIONS. Seller’s warranty does not cover the following:
(1) in-transit damage claims, improper handling by carrier or post office (Note: only the consignee of
the shipment can file a claim with the common carrier)
(2) damages caused by incorrect use, modification, carelessness, improper storage, hostile operat-
ing conditions, or unauthorized service, installation or repairs without proper training from the
Seller
(3) damages caused by fire, flood, lightning, collision, acts of God or other events beyond the
control of Seller
(4) products or parts thereof that have had serial numbers removed, altered or defaced
(5) products returned without an RMA number and sales or delivery receipt showing the date of
original purchase
(7) use of components that do not meet Seller’s specifications
(9) external parts such as cabinets or keypads
(10) periodic maintenance and adjustments resulting from normal use
WARRANTIES EXCLUDED, SELLER EXPRESSLY DISCLAIMS AND EXCLUDES ANY EXPRESS OR
IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WHICH
EXCEEDS OR IS INCONSISTENT WITH THE WARRANTY HEREIN EXPRESSLY SET FORTH.
NON-WARRANTY CLAIMS. In the event Buyer makes a warranty claim and Seller’s warranty does not
apply, Buyer shall reimburse Seller for all reasonable expenses incurred by Seller in diagnosing the instal-
lation/repair problem.
BUYER’S EXCLUSIVE REMEDIES. If the Product supplied shall fail to conform to the contract or any
applicable warranty, Buyer shall immediately notify Seller of such condition and afford Seller a reasonable
opportunity to inspect said Product. Seller shall, at its option, either repair or replace such nonconforming
Product. Seller shall not be responsible for labor charges for removal or installation of such equipment or
material or charges for transportation, handling and shipping except as provided in Seller’s written service
policy. No Product shall be returned without Seller’s prior written consent.
SELLER SHALL NOT BE LIABLE FOR ANY SPECIAL, DIRECT INCIDENTAL OR CONSEQUENTIAL
DAMAGES OFACOMMERCIAL NATURE ARISING OUT THE USE OF OR INABILITYTO USE SELLER’S
PRODUCT BY REASON OF THE FACT THAT SUCH PRODUCT DOES NOT CONFORM TO THE CON-
TRACT OR TO ANY EXPRESS OR IMPLIED WARRANTY. SELLER’S MAXIMUM LIABILITY SHALL BE
LIMITED TO THE COST OF REPAIR AND/OR REPLACEMENT OF THE PRODUCT CLAIMED TO BE
DEFECTIVE OR NONCONFORMING, SUBJECT TO SELLER’S RIGHT OF REMOVAL AND RETURN
OF PRODUCT.
All of the foregoing constitute Buyer’s sole and exclusive remedy and Seller’s sole and exclusive liability for
supplying nonconforming or defective Product.
PAGE 6

RETURNS. AVE products are fully inspected and carefully packed to ensure you are delivered a quality
product in good condition. If you are not fully satisfied with our product, returns of standard stocking items with
no restocking fee can be made within thirty (30) days of invoice to Buyer. All such returns must have prior
consent of Seller by obtaining an RMA number and must include the sales or delivery receipt showing the date
of original purchase and be in an unused condition contained in its original packaging. Any other returns must
have prior written consent of Seller and are subject to a restocking fee of fifteen percent (15%) and freight
charges.
RMA NUMBER. The RMA (Return Material Authorization) number must be obtained by contacting Seller prior
to the shipment of the the product for return. The RMA number is valid only for 15 days from the date of issue.
The RMA number must be clearly displayed on all shipping labels.
PAGE 7

ASIA
AVE (Thailand) Co., Ltd.
217/4 Crystal Garden
Soi 4 (Nanatai), Sukhumvit Rd.
Klongtoey, Klongtoey
Bangkok, 10110 Thailand
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.avethailand.com
NORTH AMERICA
AVE USA
2000 West Governors Circle, Suite E
Houston, Texas 77092
Tel: [phone]
Fax: [phone]
Email: [email protected]
www.americanvideoequipment.com
WESTERN EUROPE
AVE Multiview
Unit 1C, The Potteries,
Woodgreen Road, Waltham Abbey
Essex, EN9 3SA, UK
Tel: [phone]
Fax: [phone]
Email: [e-mail]
www.multiview.net