Aventura DHA Series Quick user guide

DHA / DHC / DHP / NVR-4U
CWS-MGR and CWS-RM-Series
Hardware Reference Manual
Please read these instructions before installation and keep for later reference.
NOTES:
1. Do not use in extreme heat or cold temperatures.
2. Do not expose to rain or moisture
3. Do not expose to flammable, explosive, or corrosive gas.
4. Avoid exposure to dust or other particles that may get inside the equipment.
5. Use of extension cords may significantly increase risk of fire, electric shock, and damage to the
equipment.
6. To avoid risk of electric shock and damage to equipment do not open the device.
7. Professional installation is required.

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 2
Reference Page
The information on this page should be filled out during or immediately following installation for later
reference.
SERIAL # ____________________________________________________
COMPUTER NAME ____________________________________________________
IP ADDRESS ____________ . ____________ . ____________ . ____________
DEFAULT GATEWAY ____________ . ____________ . ____________ . ____________
PRIMARY DNS ____________ . ____________ . ____________ . ____________
SECONDARY DNS ____________ . ____________ . ____________ . ____________
NOTES ____________________________________________________
____________________________________________________
____________________________________________________

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 3
Brief Introduction
Aventura’s DHx (excluding DH5), CWS-MGR and CWS-RM-Series systems use a standard 4U rack-mount
design with support for up to 5 hard drives, IP video decoding, and up-to 64 channels of analog video
encoding.
Unit with Front Doors Closed
Unit with Front Doors Open

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 4
Specifications
4U form factor
Intel Core 2 Quad (DHA)
Intel i7 CPU (DHC, DHP, NVR-4U, CWS-MGR, CWS-RM)
4GB RAM
Windows 7 Professional 32-bit
Operating Conditions
This unit should be installed in a room with active climate controls such as air conditioning and
dehumidification.
Operating Temperature: 40 ~ 100F
Operating Humidity: 0 ~ 80%
Networking
When using this unit on a network, connecting to a private (non-internet) network is highly
recommended for maximum security. Any potential problems or security issues resulting from an
internet-capable connection are the responsibility of the end-user.
Software
Aventura servers come pre-loaded with all the software required for proper operation. Installing
additional software such as virus protection is not recommended. Any potential problems or security
issues resulting from the installation of additional software is the responsibility of the end-user.
Hardware
Do not remove, install or modify any hardware components of the system. All maintenance must be
performed by Aventura or an affiliated authorized service.

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 5
Equipment Mounting
This system should be rack-mounted using a rail system. Rails should be secured to the side of the unit
and to the server rack in accordance with their installation instructions. Brackets on both sides of the
front of the system also allow the unit to be secured.
Secure Mounting Points

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 6
Back Panel Layout
The back panel of the system is where all wired connections are made for power and connectivity with
external devices.
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)
1. Main Power Switch (must be “on” to use front power switch)
2. Power Supply
3. PS/2 (Mouse)
4. PS/2 (Keyboard)
5. (Optional, DVR Models Only) BNC Audio/Video Inputs
6. Serial (COM Port)
7. USB
8. 10/100/1000 Base-T Ethernet LAN (RJ-45)
9. Audio Line-In (Top), Audio Out (Middle), Microphone in (Bottom)
10. Video Out (Computer Monitor)
11. (Optional) Video Decoder Out
12. (DVR Models Only) Video Encoder Inputs (D Connectors)

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 7
NOTES:
Video encoder inputs (12) require use of the supplied video pigtail connectors to convert BNC
analog video connections to the D connectors on the back panel unless using the optional back
panel BNC inputs (5).
COM port can be used to communicate with external devices. Additional hardware may be
required to interface between COM port and external devices. Additional COM ports can be
added with USB-to-COM Port adapters.
Audio output is available for systems with audio/video recording capabilities. Once speakers are
connected operators can enable or disable live audio and audio playback in the Aventura
software.
Video Decoder Outputs are an optional feature available with Aventura DVR systems. Decoder
outputs can be used to create an analog composite video signal using any video or combination
of video feeds available to the server. Output is configured through the Aventura software.

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 8
Front Panel Layout
(1) (2) (3)
(4) (5) (6) (7)
1. DVD/RW Drive
2. HDD Activity LED
3. Power LED
4. Door Lock (to prevent access to DVD/RW or power/reset switches)
5. USB
6. Reset Button (forces a system reboot)
7. Power Button (switch on back panel must be set to “on” before using)

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 9
Power
Aventura’s DHx (excluding DH5), CWS-MGR and CWS-RM-Series systems utilize a 500W power supply
that requires AC 110V, 60 Hz grounded power source.
COM Port Devices
Aventura software supports communication with a number of external devices using the COM port.
One COM port is included standard as part of the main unit. If additional COM ports are required they
should be added using a standard USB-to-COM Port adapter.
RS-485 Setup (DVR Systems Only)
By connecting the optional VID-232485EX adapter to the system’s COM port the unit can be used to
communicate with and operate RS-485 hardware such as PTZ cameras. Please follow instructions
included with the adapter and connected equipment for proper wiring. Connected devices must be
configured in the Aventura software according to the settings outlined in the device manual.
VID-232485EX

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 10
Alarm Inputs/Outputs (DVR Systems Only)
Aventura software is capable of handling alarms when the unit is connected to an external alarm box.
Two alarm boxes are available:
VID-ALARM-8CH-COM has 8 alarm inputs and 8 alarm outputs
VID-ALARM-16CH-COM has 16 alarm inputs and 8 alarm outputs
Alarm boxes should be connected to the system’s COM port in accordance with the individual unit’s
installation instructions.
VID-ALARM-8CH-COM
VID-ALARM-16CH-COM

Aventura Hardware Reference Manual for DHA/DHC/DHP/NVR-4U/CWS-MGR and CWS-RM-Series 11
Other COM Port Devices
Configuration options are also available for communication with external PTZ Keyboard Controllers, POS
Systems, Access Control Systems, and other devices. Please contact your Aventura representative to
discuss specific applications.
Technical Support
For difficulties using this unit please contact Aventura technical support at 631-300-4000 or toll-free at
1-877-707-9600. Online support is available at www.AventuraCCTV.com or email
[email protected]
When contacting technical support be certain to have full details about your Aventura products
available, including model and invoice numbers.
Service
Any service required by this unit should be performed by Aventura or authorized service personnel.
Unauthorized service may invalidate warranties or service agreements. Some service may require
equipment to be returned to Aventura’s offices for evaluation and repair. Be certain to follow proper
packing and shipping instructions for all equipment to prevent damage during transport.