Avenview HDM-C5SP-8 User manual

www.avenview.com
1
2X8 HDMI 1.3 Extender / Splitter over
Single CAT5
Model #: HDM-C5SP-8
© 2009 Avenview Inc. All rights reserved.
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations or warranties with
respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any
time without notice. No license, whether express, implied, or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in
Avenview Standard Terms and Conditions of Sale, Avenview assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products
including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly prohibited.

www.avenview.com
2
Table of Contents
Section 1: Getting Started ...................................................................................................................... 3
1.1 Important Safeguards ............................................................................................................ 3
1.2 Safety Instructions ................................................................................................................. 3
1.3 Regulatory Notices Federal Communications Commission (FCC) ......................................... 4
1.4 Introduction ........................................................................................................................... 4
1.5 Package Contents................................................................................................................... 6
1.6 Before Installation.................................................................................................................. 6
1.7 Panel Description................................................................................................................... 7
1.7.1 Rear Panel ............................................................................................................................. 7
1.8 IR Control ............................................................................................................................... 7
1.7.3 Dip Switch for EDID & Audio Settings ................................................................................... 8
1.9 Installation ............................................................................................................................. 9
Section 2: Specifications....................................................................................................................... 10

www.avenview.com
3
Section 1: Getting Started
1.1 Important Safeguards
Please read all of these instructions carefully before you use the device. Save this manual for future
reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized
product modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2 Safety Instructions
The Avenview HDM-C5SP-8 HDMI 1.3 Extender / Splitter over CAT5 has been tested for conformance to safety
regulations and requirements, and has been certified for international use. However, like all electronic
equipment’s, the HDM-C5SP-8 should be used with care. Read the following safety instructions to protect
yourself from possible injury and to minimize the risk of damage to the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.

www.avenview.com
4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The Avenview HDM-C5SP-8 HDMI 1.3 over Single CAT5 Distribution Amplifier provides the most flexible
solution by which the high definition video and high quality audio can be transmitted to different locations
over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays almost
anywhere. The 2 input HDMI source (only 1 input can be used at a time) can be duplicated and distributed to
up to 8 HDMI enable displays through cost effective Cat-5/5e cables and RJ-45 to HDMI mini-extenders
HDM-C5-R-M. With the built in equalization, the input HDMI cable can be extended up to 20 meters (66 feet)
long under Full HD, and make the overall transmission distance superior than regular HDMI splitters or matrix
switches in the market.
-Silicon Image chipset embedded for best quality, compatibility and reliability
-HDMI 1.3c compliant
-HDCP compliant
-Regenerates the HDMI signal
-Acts as 2X1 HDMI Switch and 1X8 HDMI over CAT5 Splitter
-Supports default HDMI EDID and has the ability to learn the EDID of the displays
-Supports default HDMI EDID and has the ability to learn the EDID of displays
-Extends up to 20m (66ft) of input HDMI cable
-Extends up to 60m (200ft) (720p / 1080i) of output CAT5/6 cable
-Extends up to 40m (130ft) (1080p) of output CAT5/6 cable
-Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
-Allows cascading
-1U rack mountable with interlocking power adapter for fixedness
-Perfectly integrated with other HDM-C5XD Series products

www.avenview.com
5

www.avenview.com
6
1.5 Package Contents
Before you start the installation of the converter, please check the package contents.
-HDM-C5SP-8 x 1
-Rack-mounting ears x 2
-Power Adapter x 1
-User’s Manual x 1
1.6 Before Installation
Put the product in an even and stable location. If the product falls down or drops, it may cause an
injury or malfunction.
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high
humidity.
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it
may cause a fire.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.

www.avenview.com
7
1.7 Panel Description
1.7.1 Rear Panel
1 2 3 4 5 6
1. Power Jack
2. HDMI Input 1
3. HDMI Input 2
4. DIP Switches (details below)
5. HDMI Input Source Selection (1 & 2)
6. HDMI Output over RJ45 (1 –8)
1.8 IR Control
Function Key
Function Description
Power
Turn On/Off HDMI transmission on all 8
Output Ports
Switch to the other channel from either
HDMI INPUT 1 or HDMI INPUT 2 that is in
play
Switch to the other channel from either
HDMI INPUT 1 or HDMI INPUT 2 that is in
play
SOURCE SELECT 1
Select HDMI INPUT 1 to be the input
source
SOURCE SELECT 2
Select HDMI INPUT 2 to be the input
source
F1
Mute on/off (audio off, video on) on all
eight output ports

www.avenview.com
8
1.7.3 Dip Switch for EDID & Audio Settings
DIP Switch Position
Video
Audio
Description
PIN # 1
PIN # 2
OFF 
OFF 
1080p
Stereo1
Default Mode2:Up to 1080p & Stereo output.
OFF 
ON 
720p/1080i
Stereo
Safe Mode3:Forces system to output at 720p/1080i
with Stereo Audio.
ON 
OFF 
Bypass4
Bypass
EDID Learning Mode5:for learning EDID from the
display while playing any received HDMI Audio format.
ON 
ON 
Bypass
Stereo
EDID Learning & Stereo Mode: For learning EDID from
the display while enforcing stereo output.
1 Pin-1 and pin-2 are for HDMI INPUT 1; while pin-3 and pin-4 are for HDMI INPUT 2
2 If the HDTV shows video but without audio, please set audio mode to stereo.
3 Factory default setting is pin-1 at OFF[  ], pin-2 at OFF[  ], pin-3 at OFF[  ] & pin-4 at OFF[  ]for 1080p
with stereo.
4 If you encounter any unsolved audio/video output problem during system installation, please dial the DIP
switch to pin-1 at OFF[  ], pin-2 at ON[  ], pin-3 at OFF[  ], & pin-4 at ON[  ] for safe mode to enforce the
most compatible 720p stereo output for system check. However, the safe mode cannot be initiated if your
HDMI sources are set to enforce 1080p output. In this case, please reconfigure your HDMI source to all
resolution output for troubleshooting.
5 Bypass means this device will maintain playing the original format of HDMI signals in video and perhaps
audio. By setting at this mode, the users may encounter compatibility issue among different kinds of HDMI
sources and displays. If you cannot get the audio and/or video output normally at the system installation,
please change the DIP switch setting to default mode or even safe mode to verify the functionality of the
device.
6 To learn the EDID of HDMI display for respective HDMI source devices, set (pin-1 and/or pin-3)at ON[  ]
first then connect the HDTV sets to respective HDMI inputs via HDMI cables. Then please wait for 20
seconds for completing the EDID learning procedure. If you want to learn the EDID from another HDTV, you
must set pin-1 and/or pin-3) at OFF[  ] first and repeat this procedure all over again.

www.avenview.com
9
1.9 Installation
To setup Avenview HDM-C5SP-8 follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect to a HDMI source (such as a Blu-Ray Disc player) to HDMI Input of HDM-C5SP-8
3. Connect the receiver HDM-C5-3-R or HDM-C5-R-M to HDM-C5SP-8 from RJ45 Out with CAT5 / CAT6
cable
4. Plug in 5V 4A DC Power (supplied).
5. Power on the HDMI display
6. Power on HDMI Sources.

www.avenview.com
10
Section 2: Specifications
Item
Description
Units
HDM-C5SP-8
Unit Description
2x8 HDMI 1.3 Transmitter / Splitter over CAT5 / CAT6
HDMI Compliance
HDMI 1.3c
HDCP Compliance
Yes
Video Bandwidth
Single Link 225 MHz (6.75Gbps)
Supported Resolutions
480i / 480p / 720p / 1080i / 1080p60
Resolution and Distance
Full HD: (1080p) ~ 40meter (130feet) (CAT5e) / 50meter (165feet) (CAT6)
HD: (720p/1080i) ~ 50meter (165feet) (CAT5e) / 60meter (200feet) (CAT6)
Audio Support
Surround Sound (up to 7.1 Ch) or Stereo Digital Audio
Equalization
-
Input TMDS Signal
1.2 Volts (peak-to-peak)
Input DDC Signal
5 Volts (peak-to-peak, TTL)
ESD Protection
-Human body model —±15kV (air-gap discharge) & ±8kV (contact discharge)
- Core chipset —±8kV
Input
2 x HDMI
Output
8 x Rj45
HDMI Connector
Type A (19 pin female)
RJ45 Connector
WE/SS 8P8C with 2 LED indicators
Dimensions (L x W x H)
17” x 6.2” x 1.8”
Power Supply
5V 4A DC
Power Consumption
13 Watt (max)
Environmental
Operating Temperature
32˚~ 104˚F (0˚to 40˚C)
Storage Temperature
-4˚~ 140˚F (-20˚~ 60˚C)
Relative Humidity
20~90% RH (no condensation)

www.avenview.com
11
Notice
1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to
retrieve and provide DVI/HDMI EDID information.
2. All HDMI over CAT5 transmission distances are measured using Belden 1583A CAT5e 125MHz
LAN cable and ASTRODESIGN Video Signal Generator VG-859C.3
3. The transmission length is largely affected by the type of LAN cables, the type of HDMI sources,
and the type of HDMI display. The testing result shows solid LAN cables (usually in bulk cable
300m or 1000ft form) can transmit a lot longer signals than stranded LAN cables (usually in
patch cord form). Shielded STP cables are better suit than unshielded UTP cables. A solid UTP
CAT5e cable shows longer transmission length than stranded STP CAT6 cable. For long extension
users, solid LAN cables are your only choice.
4. EIA/TIA-568-B termination (T568B) for LAN cables is recommended for better performance.
5. To reduce the interference among the unshielded twisted pairs of wires in LAN cable, you can use
shielded LAN cables to improve EMI problems, which is worsen in long transmission.
6. Because the quality of the LAN cables has the major effects in how long transmission distance
will be made and how good is the received display, the actual transmission length is subject to
your LAN cables. For resolution greater than 1080i or 1280x1024, a CAT6 cable is recommended.
7. If your HDMI display has multiple HDMI inputs, it is found that the first HDMI input
[HDMI input #1] generally can produce better transmission performance among all HDMI inputs.

www.avenview.com
12
Disclaimer
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the
Avenview hardware, software, or other products and documentation provided herein.
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and
non-infringement.