Avidsen HomeFlow W User manual

WIRED SMART WIFI
THERMOSTAT
HomeFlow W
Ref.127062
www.avidsen.com
V2
EN

EN3
CONTENTS
A - SAFETY
INSTRUCTIONS
1 - OPERATING PRECAUTIONS 04
2 - WARNING 04
3 - MAINTENANCE AND CLEANING 04
4 - RECYCLING 04
B - PRODUCT
DESCRIPTION
1 - KIT CONTENTS 05
2 - CHARACTERISTICS 05
3 - LCD DISPLAY 05
C - INSTALLATION
1 - WIRING AND MOUNTING 06
2 - SETTINGS 06
2.1 - Time and date settings 06
 2.2-Howtocongureaprogramme 07
 2.3-Temporarytemperaturechange 07
 2.4-Manualmode 07
 2.5-Howtoturnoffthethermostat 07
 2.6-Holidaymode 07
 2.7-Lockingthebuttons 08
 2.8-Backlighting 08
 2.9-Technicalsettings 08
D - CONNECTION
1 - INSTALLINGTHEMOBILEAPPLICATION
AND CREATING AN ACCOUNT 09
2 - CONNECTING THE THERMOSTAT 10
2.1 - Connection in EZ mode 10
 2.2-Otherconnectionmode(APmode)12
E - USE
1 - USE VIA THE APP 14
 1.1-Weeklyprogramme 14
1.2 - Settings 15
1.3 - Voice assistant
 compatibility 15
F - TECHNICAL AND
LEGAL INFORMATION
1 - TECHNICAL CHARACTERISTICS 16
2 - WARRANTY 16
3 - HELP AND ADVICE 16
4 - DECLARATION OF CONFORMITY 16

EN 4
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS
• Read this entire manual before starting the
installation.
• Donotallowchildrentooperatetheproduct.
• Donotinstallthisproductoutside
• Switchoffthecircuitbreakerbeforeworkingon
theproduct
2 - WARNING
Thisproductwasdesignedtocontrolaboiler(gas,
heatingoil,irreversibleheatpump);anyotheruse
of the device is not covered by the warranty or
technicalsupport.Avidsencannotbeheldliablefor
anyusethatdoesnotcomplywiththeinstructions
in this manual and causes damage. Children
should be supervised to make sure that they do
notplaywiththedevice.
3 - MAINTENANCE AND CLEANING
Theoutercasecanbecleanedperiodically.
• Switchoffthecircuitbreakerbeforeworkingon
theproduct.
• Do not use abrasive substances, substances
containingalcohol,thinnersorotherammable
substances.
• Donotsprayanyproductsdirectlyontotheunit.
4 - RECYCLING
Thislogodenotesthatdevicesnolonger
in use should not be disposed of as
household waste. They are likely to
containhazardoussubstanceswhichare
dangerous to both health and the
environment. Return the equipment to your local
distributor or use the recycling collection service
providedbyyourlocalcouncil.
Pour en savoir plus :
www.quefairedemesdechets.fr

EN5
B - PRODUCT DESCRIPTION
The HomeFlow W programmable thermostat lets you control your home’s temperature from your
smartphone(AppleandAndroid).IthasalargebacklitLCDscreen.
Easytoinstallanduse,itwillquicklytintoyourlifestyle.Youcancongureweeklyprogrammesfromthe
apporthermostatdirectly.
1 - KIT CONTENTS
11smartthermostat
2Wallplugsandscrewsfor
mounting
1x1 2x2
2 - CHARACTERISTICS
1. Weeklyprogrammesfromthethermostatorintheapp
2. Usetemperaturerange:0°Cto40°C
3. Adjustabletemperaturerange:5°Cto35°C(inincrementsof0.5°C)
4. Precisionoftemperaturemeasurements:±1°C(to20°C)
5. Powersupply:230VAC/50Hz
6. Switchablecurrent:6A(2Ainductiveload),230V
7. Backlighting:white
8. Compatiblewith2.4GHzWIFI(iOS10.0minimumandAndroid4.0.3minimum)
3 - LCD DISPLAY
PRG
8
8
:
8
8
°
E
°
E
P
8
ROO
M
HO
LD
AM
PM
SET
7
6
5
4
3
2
1
8
8
.
8
8
8
.
8
1
2
3
4
5
6
8
7
9
10
PRG
8
8
:
8
8
°
E
°
E
P
8
ROO
M
HO
LD
AM
PM
SET
7
6
5
4
3
2
1
8
8
.
8
8
8
.
8
14
15
11
12
13
PRG
1DayofWeek
2Time
3WIFISymbol(solidwhenthethermostatis
online,blinkingwhenthereisnoconnection)
4‘Flame’symbolonwhenheatingisenabled
5Setpointtemperature
6Lockingthebuttons
7Holidaymode
8Temporarymanualmode
9Manualmode
10 Roomtemperature
11 Modifytheprogramme
12 Changethedateandtime
13 Changeanoptioninthesettingsorprogramme
menu
14 Adjustthesetpointtemperature,changevalues
inthesettingsorprogrammemenu
15 ReturntoHomemenu

EN 6
C - INSTALLATION
Beforethedevice is permanentlyinstalled,make
sure it is within WIFI range of your router. If it is
installedoutsideWIFIrange,youshouldinstalla
WIFIrepeatertoboostthesignal.
1 - WIRING AND MOUNTING
Wiringdiagram basedon thetype of installation.
Refertothemanualforyourheatingequipment.
N
NL
2
31
456
LNO NC COM
L
Electricvalve
/pump
N
NL
2
31
456
LNO NC COM
L
Hotwire
N
NL
2
31
456
LNO NC COM
L
Boiler
N
NL
2
31
456
LNO NC COM
L
Expansion
valve
6 5 4 3 2 1
Caution:beforebeginningthisstep,makesurethe
powersupplyhasbeencut.Whenindoubt,please
contactaprofessionaltocompletetheinstallation.
1.Openthethermostat.
2.Attachthepowersupplytothewall(usescrews
suitabletothesupport).
3.Openthecentralcoverandconnect(refertothe
diagramabovedependingonyourinstallation).
4.Close the cover and plug the screen into the
powersupply.
2 - SETTINGS
2.1 - SETTING THE DATE AND TIME
1. Press
PRG
once until the date symbol ashes,
pressthe
PRG
or
PRG
buttonstoadjustthecurrent
day.
2.Press
PRG
onceuntilthemonth

EN7
symbol ashes, press the
PRG
 or
PRG
 buttons to
adjustthecurrentmonth.
3. Press
PRG
 once until the year symbol ashes,
pressthe
PRG
or
PRG
buttonstoadjustthecurrent
year.
4. Press
PRG
 once until the hour symbol ashes,
pressthe
PRG
or
PRG
buttonstoadjustthecurrent
hour.
5.Press
PRG
onceuntiltheminutesymbolashes,
pressthe
PRG
or
PRG
buttonstoadjustthecurrent
minute.
6. Press
PRG
 once to return to the main menu or
wait 30 seconds.
2.2 -CREATINGAPROGRAMME(THISCANBE
DONEFROMTHEAPP)
1. Press
PRG
 once until the day of the week
symbolashes.
 1=Monday;2=Tuesday;3=Wednesday;4=
Thursday;5=Friday;6=Saturday;7=Sunday
2.Pressthe
PRG
or
PRG
buttonstoselectthedayof
theweektobechanged.
3.Press
PRG
once,P1is displayed onthescreen
andthetimeshouldbeashing.-Usethe
PRG
or
PRG
 buttons to adjust the start time for the new
temperaturesetpoint.
4.Press
PRG
once,P1is displayed onthescreen
andthetemperatureshouldbeashing.Usethe
PRG
 or
PRG
 buttons to adjust the temperature (in
incrementsof0.5°C).
5.Press
PRG
once,P2is displayed onthescreen
andthe timeshould be ashing. Repeat steps
3-4-5throughP6
6.Onceyouhaveprogrammedaday,repeatthese
stepsfortheotherdaysoftheweek.
7. Press
PRG
 once to return to the main menu or
wait 60 seconds.
8.Thethermostat’sdefaultvaluesareshownin
thetablebelow
Defaultprogramme
Events Time Temp
Week
P1 06:30 20°C
P2 08:30 16°C
P3 12:00 16°C
P4 14:00 16°C
P5 16:30 21°C
P6 22:30 7°C
Defaultprogramme
Events Time Temp
Weekend
P1 07:30 20°C
P2 09:30 20°C
P3 11:30 20°C
P4 13:30 20°C
P5 16:30 20°C
P6 22:30 15°C
2.3 -TEMPORARY TEMPERATURE CHANGE
1. Press the
PRG
 or
PRG
 buttons to adjust the
temperature, press
PRG
 to conrm or wait 15
seconds.Thistemperatewillremainsetuntilthe
nextprogramme.
2.If youwish to return to the initial temperature,
press
PRG
again.
2.4 - MANUAL MODE
1.When the thermostat is connected to a
programme,press
PRG
once.TheHOLDsymbol
lightsupandthetemperatureashes.Pressthe
PRG
or
PRG
buttonstoadjustthetemperature,press
PRG
toconrmorwait15seconds.
 Thistemperaturewillbesetuntilyoupress
PRG
again.
2.5 - HOW TO TURN OFF THE THERMOSTAT
1.When the thermostat is connected to a
programme,press
PRG
3times,nosymbolshould
appearatthebottomrightofthescreen.Inthis
mode,thetemperatureissetto5°Ctoprevent
thepipesfromfreezing.
2.Press
PRG
againtoreturntothedefaultprogram.
2.6 - HOLIDAY MODE
1. Press and hold
PRG
 for 5 seconds to activate
holidaymode.
2.Pressthe
PRG
or
PRG
buttonstoadjustthenumber
ofdaysyouwillbegone,press toconrmor
wait 15 seconds.
3.Press
PRG
againtoconrm.
4.Tocancelholidaymode,press
PRG
or
PRG
.
C - INSTALLATION

EN 8
C - INSTALLATION
Settings Screen Adjustmentoption
Default
value
WIFIConguration
Press
PRG
for3secondstoenterWIFI
pairingmode.Thenfollowtheinstructionsin
the"Login"paragraph.
Hysteresis
Thehysteresisisadjustablefrom0.2to2°C.
Thehysteresispreventstheheatingfrom
beingswitchedonandofftooquicklyclose
tothethermostat'ssetpointtemperature.
0.4
Temperature
calibration
Thisfunctioncanbeusedtoadjustthe
measuredtemperatureifatemperature
differenceexists.Calibrationisdonein
incrementsof0.5°Candfrom+3°Cto-3°C.
0
Time
synchronisationvia
theinternet
WhentheselectionisON,thedateand
timeareautomaticallysynchronisedviathe
internet.
ON
Softwareversion
Displaysthesoftwareversion
Reset
PressPRG,thescreendisplays----,press
PRGagaintorestorethedefaultvalues.
2.7 - LOCKINGTHEBUTTONS
1.Press
PRG
for5secondstolockthebutton,thescreenwilldisplayLOC
2.Tounlockthescreen,press
PRG
for5seconds,thescreenwilldisplayUNLO
2.8- BACKLIGHTING
1.Backlightingisactivatedwhentheuserpressesabutton.Itremainsactivefor15safterthelastpress
2.9 - TECHNICAL SETTINGS
1.Pressandhold
PRG
for5secondstoenterthesettings.
2.Press
PRG
toselectthesetting.
3.Pressthe
PRG
or
PRG
buttonstoadjustthevalues.
4.Press
PRG
orwait15secondstoreturntothemainmenu.

EN9
D - CONNECTION
Thisproductonlyworkswitha2.4Ghzfrequency.
During pairing, make sure your smartphone is
connected on that specic frequency. If you are
notsure,checkwithyourInternetserviceprovider.
1 - INSTALLING THE MOBILE APP AND
CREATING AN ACCOUNT
Once the thermostat is connected, follow the
instructionsbelowtopairit.
DownloadtheAvidsenHomeappfromtheAndroid
PlayStoreorAppleAppStore.
Launch the app and log in if you already have
anaccount. If not,pressCREER UN NOUVEAU
COMPTE (CREATEA NEW ACCOUNT) and let
theapplicationguideyou.
After accepting the privacy policy, create an
accountwithanemail address.
Chooseyourcountryandenteryouremailaddress,
thenselectObtenir le code de vérication (Get
conrmation code).
Inafewseconds,youwillreceiveaconrmation
codeinyouremailinbox.Enterthiscodetonalise
registration.
Notethatthisemailmaygointoyourspamfolder.
Ifyoudonotreceiveacodebeforethecountdown
ends,pressrenvoyer(resend)andcheckthatyour
emailaddresswasenteredcorrectly.

EN 10
To complete your registration, set a password
between6and20characterslongwithlettersand
numbersonly.ThenpressTerminé(Finished).
2 - CONNECTING THE THERMOSTAT
2.1 – CONNECTION IN EZ MODE
Thisistheeasiesttypeofconnectiontomake.
A)Tostartpairing,pressAJOUTER(ADD)inthe
app.Makesureyourphoneisconnectedtoyour
router or gateway’s 2.4GHz WIFI network. If you
alreadyhaveadeviceinstalledontheapplication
(e.g.IPcamera,smartplug,etc.)clickon+inthe
toprightcorneroftheapplication.
B)Next,select“HomeFlow-W”
C)Selectyour2.4GHzWIFInetwork(note: your
smartphone must be connected to the same
WIFI network that your thermostat will use),
enteryournetworkpasswordandpressSUIVANT
(NEXT).
D - CONNECTION