Aviosys IP Video 9100B User manual

IP Video 9100
User Guide

IP VIDEO 9100 USER MANUAL
User Guide
IP Video 9100
Manual version: 2.1
Date: June. 30, 2004
VER. 2.10,
- 1 -

Caution: Any changes or modifications not approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for FCC and CE. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in
commercial environment.
Important Notice
1. IP Video 9100 is for indoor use only.
2. IP Video 9100 is not waterproof. Therefore we will not hold any
damage responsibility if IP Video is used under raining condition.
3. Be sure to use the DC adapter that is provided by your dealer. We will
not hold any responsibly if wrong DC adapter is in use.
4. Be caution in handling IP Video 9100 for physical shocks may
occur serious damage.
5. If IP Video 9100 does not operate properly, please contact your local
dealer for after sale service. In all cases, you are prohibited to
disassemble the product. If so, we do not hold any responsibility for
mal-function nor service warranty.
- 2 -

IP VIDEO 9100 USER MANUAL
Table of Contents
1. PRODUCT OVERVIEW............................................................................................... 4
FEATURES ......................................................................................................
2. PHYSICAL DESCRIPTION ......................................................................................... 5
SPECIFICATION ..................................................................................................................
SYSTEM MINIMUM REQUIRNMENT .......................................................................................
3. PANEL DESCRIPTION…………………………………………………………………6
FRONT PANEL………………………………………………………………………………
BACK PANEL………………………………………………………………………………..
4. INSTALLATION………………………………………………………………………..7
PREPERATION....................................................................................................................
HARDWARE INSTALLATION .................................................................................................
SOFTWARE INSTALLATION ...............................................................................................
5. INTERNET SET UP ................................................................................................... 14
LAN SET UP........................................................................................................................
INTERNET SET UP...............................................................................................................
6. FUNCTION…………………………………………………………………………….16
SIMPLE FUNCTION .............................................................................................................
VIDEO ADJUSTMENT………………………………………………………………………..
SECURITY SETTING ............................................................................................................
MOTION DETECTION FUNCTION...........................................................................................
7. OTHER FUNCTIONS………………………………………………………………….26
8. AOUTHORITY………………………………………………………………………….26
ADMINISTRATOR ................................................................................................................
NORMAL USER ...................................................................................................................
9. CAUTION.................................................................................................................... 29
ADDITIONAL INFORMATION : FAQ......................................................................................
VER. 2.10,
- 3 -

1. Product Overview
IP video 9100 has an IP digital web server inside. With this great gadget you can
put up 4 different sources with only one set of IP, for example (live security
observing, online education, TV shows, video games and etc) make remote
locations immediately accessible through standard web browsers. IP video 9100
is equipped with cutting edge technology, includes 4 video in, 1 video out, a web
server, and physical Ethernet connection. Therefore it does not need to plug in
front of computer, you can simply just plug into an internet line and start observing
or broadcasting from any where in the world.
FEATURES
IP Video 9100 features：
1. Embedded Web Server
2. Pass image to Displays - TV, PDP, HDTV. LCD TV
3. Support MSN & YAHOO Messenger
4. Can input 4 different sources.
5. Multi – video or video source from different area.
6. Layout 1x1, 2x2, 3x3, 4x4
7. Resolution - True 640x480, 352x288, 320x240, 176x144,
- & 704 * 576, 160 *120
8. Video Quality - Low, High
9. Color adjustment: Brightness, Contrast, Hue, and Saturation
10. Motion Detection - Three-Sensitivity Level.
11.E-mail the Detected Images to preset e-Mail address.
12. FTP the Detected Images to preset FTP server.
13. Support Network - Fixed IP, DHCP, PPPoE and DDNS.
13. Default HTTP Port supported-
14. Changed to fit different network.
15. Browser by Internet - IE (Internet Explore)
16. Support Java Applet support and Active X control.
17. A Linux based server
•10/100BT LAN supported
•Built in JPEG Decoder
•Motion detection
•User may setup his email address in the system, let the system
notice the user when an event occur
•Provide some GPIOs for different application
19. Support GlobalSign – no need to lower security level.
20. Work with MSN& Yahoo Messenger, AMCAP, and WMCAP &
VIDCAP program
- 4 -

IP VIDEO 9100 USER MANUAL
2.Physical Description
BOX CONTENT
IP Video 9100 package content：
! 1 x IP Video 9100
! 1 x RJ 45 internet line
! 1 x DC Power adopter (5V, 110~220V)
! 2 x Composite Cable (RCA jacks)
! 1 x CD (a. IP Editor program b. User Manual book)
! 1 x Quick Installation Guide
Minimum Requirement
 ≥300MHz Intel Pentium II and above
 Windows 98 / SE / 2000 / ME / XP, or LINUX, MAC system
 ≥64MB memory
 VGA Card：support Hi - Colors and above and direct draw
 Internet card - RJ 45 (CAT 5)
 Internet Hub / Router
 Internet : one set of IP provided by your ISP
EX: xxx.xxx.xxx.xxx
VER. 2.10,
- 5 -

3. Panel Description
Side Panel: 4 Video Input
Back Panel: from left to right:
1. Reset Button
2. DC Power - 5V, 110 ~ 240.
3. Power On / Off
4. Network - RJ 45
5. Video Out
- 6 -

IP VIDEO 9100 USER MANUAL
4. Installation
Before using IP Video 9100, follow bellow:
Before installation:
 Reconfirm your package content
 Prepare a Hub for Internet monitor
 Electricity 110 ~ 240 V
Hardware installation
1. Plug in IP Video 9100 Power 2. Plug in RJ 45 line to a HUB
3. Connect the HUB to Internet modem (ADSL/XDSL modem)
4. Connect Video source for IP Video box.
5. Turn you computer on
VER. 2.10,
- 7 -

SOFTWARE INSTALLER
After connecting the power and RJ 45 line, following the steps below to install the
software.
Step 1: Install IP KAM by executes Setup.exe in the CD; choose setup language and
the install shield Wizard will help finish the program.
- 8 -

IP VIDEO 9100 USER MANUAL
VER. 2.10,
- 9 -

Step 2: Then you can see shortcut icon “IP KamVid 1070 “on desktop, click this icon.
Note: Be sure that the power is turn on and the RJ45 line is properly connected.
Step 3: The KIPEDIT program will detect all the active IP9000s or IP9100s in the same
local Ethernet, and display the findings in the window.
- 10 -

IP VIDEO 9100 USER MANUAL
Step 4: Click the one you want to set, its name, IP will be displayed below. You can
change its name (please use numbers or letter) or IP (please set in the same subnet as
your PC) in the text windows. Then click Update. After about 20 seconds, the new
setting will work.
Step 5: Double click the picture in the window of KIPEdit or type the IP address in the
IE browser, you can open the web page of IP9000. If you can not open the web page
of IP9000, be sure that you have installed IE 6.0 with SP1 or later version.
NOTE:
1. After you have installed IP9000 on your PC, the IP9000 was registered in DirectX.
IP9000 can be used as local camera by any software that supported DirectX, such as
MSN, Amcap, Media encoder, Yahoo Messenger as long as you not change the
directory path of ipcam’s driver.
VER. 2.10,
- 11 -

2. For those software that only supported old VFM driver, such as Vidcap and
netmeeting, please click install VFM device, then you can get the captured images
from IP9000 (you should be the administrator at the first install process)
3. For those not totally compatible with VFM, such as QQ and POPO, you should click
remove device button first, then click install VFM device, then you can get the
captured images from IP9000.
Work with Yahoo /MSN Messenger
1. Work with Yahoo /MSN Messenger: We use Yahoo for instance. Select the friend
you would like to send your video. For instance, we pick up YahooHelper.
2. Choose Webcam then system will ask your Internet connecting speed.
- 12 -

IP VIDEO 9100 USER MANUAL
3. Then My WEBCAM will jump up. Please go to “file “ “Preference” “Camera
Setting” to select your prefer video to transfer.
4. You can type in appointed IP address (No matter Real IP or Dynamic IP) and confirm
by click “Add” and choose if reverse the out streaming video.
We support
A. Normal B. Flip Vertical C. Flip Horizontal D. Rotate 180
If the video is upside down, you can choose D to get rotate video.
And also adjust the video color ; Brightness, contrast, Hue, Saturation, Sharpness
Note
1 : for safety issue , as transfer video by Yahoo /MSN, only Administrator can do the
video streaming. You have to type the username and password.
2 : Work with Yahoo/ MSN , the streaming speed is depend on Yahoo .MSN server.
VER. 2.10,
- 13 -

- 14 -
5.Network Set up
From our Network set up, users can view live video from any where in the world, with
just a computer.
Click on Network set up: this area is authorized by administrator only.
1. Still IP: Provided by ISP, with this IP you can connect this address from any
where in the world.
1-1 : Using Still IP: list your still IP address
1-2 : Choose “Reboot immediately”. Please close your browser and reboot again and
type in your IP address once again.
If using DHCP, please choose‘ Automatically by DHCP”
*And please use IP EDITOR program (Find users exact IP) that’s included in the
CD ROM
2. DHCP setup- ADSL / xDSL: ISP will provide your exact IP address, please enter
your Username and password for your provider.

IP VIDEO 9100 USER MANUAL
2-1 Enter your user name, password, mail server, mail name (pass word), sender
e-mail, and receiver e-mail.
2-2 Choose Save & Dial Now, by using PPPoE it can automatically dial to your ISP,
and ISP will provide exact IP address in your mail.
VER. 2.10,
- 15 -

2-3 Turn off your browser of IP Video 9100 and restart
6. Functions
Please refer to all the function on the left side of IP Video 9100 AP; most of its
configuration can only be use by Administrator.
Functions:
1. IP address
2. Change Password
3. Camera Control:
Picture Quality - Low, High, Medium, Clarity& Motion
(Resolution) - 640*480,352*288,320*240,176*144
Frequency – Indoor 50, Indoor 60 & Outdoor
4. Image (Split) - 1x1, 2x2, 3x3, and 4x4
Note – split image are focus into a single image.
5. Operation Mode:
- Continues mode
- Period – refresh 1 - 60 second
6. View Log: check on visitors IP
- 16 -

IP VIDEO 9100 USER MANUAL
7. Configuration: System, User, Motion detection, Network, Channel, and DDNS
8. Right click function: Record, Snap,
3-1. Frequency: indoor, outdoor&50, outdoor&60
3-3: Color Adjust
: Brightness Contrast, Saturation, Hue, Sharpness
STD –Default color
4. Splits – 4 / 9/ 16 screen
4-1: 4 screen
4-2: 9 screen
4-3:16 screen
VER. 2.10,
- 17 -

5. Operation Mode:
Continues mode: Video will display continues
Period – Video will refresh 1 - 60 per millisecond or per
second
6. View Log – view which IP has been visiting your Live image
Note: View/Log / Camera Window
As in View Log, the video will not show on windows, to get the video back
Please click Camera Window.
7. There are Video setting in Configuration:
* System
* User
* Motion Detection
* Network
* Channel
* DDNS
Kamera Window: Click to go back to Application main page.
- 18 -

IP VIDEO 9100 USER MANUAL
7-1 System Setting: Setup Name , Time , show on Windows,
7-1-1 : Camera name, time and date setup
Note: maximum 18 English characyters
7-1-2 : Http Port setup : For customer with
IP Sharer device can setup the share port
Please check the setup in the IP Share device and type the
port number in this area.
7-1-3 : Reset to factory configuration
7-1-4 : Restart IP Video 9100
7-1-5 : Renew its firmware
VER. 2.10,
- 19 -