Avis IPL-HD200 Series User manual
Copyright 2010 by AVIS All rights reserved.
6
LED White LED Light Support
View Area 190 * 282 mm / Customizing
Function Light Control Button Function
Display LCD Light Brightness Display
Color Temp Under2300K ~ Over20000K
Brightness Over30,000Lux(Surface) / Customizing
Uniformity Over85%
Fan Automatic Temp. Controller
Interface RS232C PC Interface
Software AVIS Light Controller Software (For RS23C)
Power AC100~250V Input, 50/60Hz
Dimension 500 * 620 * 460 (WHD, mm)
Feature Of Product
Copyright 2010 by AVIS All rights reserved.
7
LCD Display (DISPLAY)
Lamp Select & On/Off button
Auto Display button
Menu button
UP/DOWN button
ON/OFF button
LCD Display
To express all operationcondition of the product.
ViewArea
The illuminant of Lamp is displayed part.
Lamp Select & ON/OFF Button (Lamp1~4/User1~4)
The button which selects the each lamp can do ON/OFF which corresponds.
Whenit press above 2 seconds, the correspondinglamp will be selected and
It will be able to control with UP/DOWN.
Auto Display Button
Whenit press, it will operate turning the lamp sequentially.
Auto mode will be able to designateA mode or B mode.
Menu Button
This button is enter .
UP/DOWN Button
This button is brightness control.
ON/OFF Button
This button is ON/OFF control.
IPL-HD200 Function name & Description(Front)
Function Name & Description Of Product
Copyright 2010 by AVIS All rights reserved.
8
AC Power Input
Power Switch
DC FAN
RS232C Port
DC FAN
Accordingto internal temperature, the FAN is operated with automatic and
accordingto the temperature what user wants, it will be able to control FAN
operationcondition.
RS232C Port
It will be able to control the whole operation condition with PC which it connect the RS232 Cable.
Power Switch
It is the main power switch.
AC Power Input
It is AC power input terminal and the input voltage is AC 100~250V 50/60Hz.
IPL-HD200 Function name & Description(Back)
Function Name & Description Of Product
Copyright 2010 by AVIS All rights reserved.
9
If you press Menu Button, it can be choice option mode.
Using UP/DOWN Button, select Auto Mode Set.
If you press Menu Button, appear to choice the mode.
Auto Mode operate Auto Mode A & Auto Mode B.
1.Auto mode A operate the lamp turn ON and OFF as waiting time
by turns.
2.Auto mode B operate the lamp turn ON and OFF as setting
level and waiting time.( it will able to save 32 ways. )
Menu Button
If you press the Menu button, it’ll be able to select the option mode.
It is enter function of all mode.
[Auto Mode Set / Fan Control / User Mode Set / Exit ]
Product Use Method
Copyright 2010 by AVIS All rights reserved.
10
UP/DOWN Button
To use UP/DOWN button, automode set MODE select A.
After select AutoA mode, press menu button.
It can select each Lamp which press Lamp button.
Move cursor to left side when you press up button about 0.5second
and then press down button.
Move cursor to right side when you press down button about
0.5second and then press up button.
If you press menu button, display save mode.
Product Use Method
Copyright 2010 by AVIS All rights reserved.
11
UP/DOWN Button
To use UP/DOWN button, automode set MODE select B.
After select AutoA mode, press menu button.
It can select each Lamp which press Lamp button.
Move cursor to left side when you press up button about 0.5second
and then press down button.
Move cursor to right side when you press down button about
0.5second and then press up button.
If you press auto button, can select next.
If you press menu button, display next step.
If you press menu button, display begin & end mode.
After set begin & end, press menu button and display save mode.
Product Use Method
Copyright 2010 by AVIS All rights reserved.
13
Select user mode at option mode.
After select enable, press menu button.
To use UP/DOWN button, user select MODE select A.
It can select each Lamp which press Lamp button.
Move cursor to left side when you press up button about 0.5second
and then press down button.
Move cursor to right side when you press down button about
0.5second and then press up button.
If you press auto button, can select next.
If you press menu button, display next step.
After set userA mode, press menu button and display save mode.
Product Use Method
Copyright 2010 by AVIS All rights reserved.
14
Select user mode at option mode.
After select enable, press menu button.
To use UP/DOWN button, user select MODE select B.
It can be able to save 32 items of each user mode, so can select
user 1,2,3,4 which wanted to use up/down button.
And press menu button, display next step.
It can select each Lamp which press Lamp button.
Move cursor to left side when you press up button about 0.5second
and then press down button.
Move cursor to right side when you press down button about
0.5second and then press up button.
If you press auto button, can select next.
If you press menu button, display next step.
After set begin & end, press menu button and display save mode.
Product Use Method
Copyright 2010 by AVIS All rights reserved.
15
It can be controlled Lamp ON/OFF and
brightness.
To use each LED Lamp, can be set color
temperature and brightness.
It can not be saved at lamp mode, so you
have to save User mode or mark setting
code.
UserA Mode can be able to select 4 kinds
setting code with using lamp button.
If you want to change the setting code, can
be set option mode.
It can not be controlled brightness at user
mode.
It can be able to save 32 items of each user
mode, so can select user 1,2,3,4 which
wanted to use up/down button.
Ex) If you want to select setting code of
user1, can be able to press UP/DOWN
button.
Product Use Method
Copyright 2010 by AVIS All rights reserved.
16
1 2
3
4
5
6
PC control program is able to control all of IPL-HD200.
Function description
[1] Lamp is able to turn ON or OFF when click lamp1,2,3,4.
Shot key –No. key 1(LAMP1), 2(LAMP2), 3(LAMP3), 4(LAMP4).
[2] Display Lamp of Light Lux.
Click –Control Lamp of Light Lux
Double Click –Set the point directly.
[3] Cursor
[4] Move cursor, Light Lux UP/DOWN
Shot key –Move left or right.
Move up or down (Light Lux UP/DOWN)
[5] Present temperature.
[6] Fan operation condition.
Button
AUTO –AUTO MODE operation/ stop
Shot key –Akey
ON - Turn all Lamp ON/OFF
Shot key –P key
RESET –System Reset
Shot key –R key
OPTION –Auto mode set
Fan operationset
Operationset
User mode set
Communication port set
System Setup
Firmware Upgrade
Shot key –Okey
Product Use Method
Copyright 2010 by AVIS All rights reserved.
17
Display setting point of IPL-L150, if start firstly.
Click each cell, and set the wait time.
Button
Read - Read setting point of product.
Write - Save setting point to product.
Display setting point of IPL-L150, if start firstly.
Set Lamp of Light Lux, wait time, begin No. and end No.
Button
Read - Read setting point of product.
Write - Save setting point to product.
Product Use Method
Copyright 2010 by AVIS All rights reserved.
18
Display setting code, if start firstly.
Click the enable so you can operate user mode.
Click the A at mode.
Click each cell and set code.
Button
Read - Read setting code of product.
Write - Save setting code to product.
Display setting code, if start firstly.
Click the enable so you can operate user mode.
Click the B at mode.
Click each cell and se code.
Set Lamp of Light Lux, wait time, begin No. and end No.
Button
Read - Read setting code of product.
Write - Save setting code to product.
Product Use Method
Copyright 2010 by AVIS All rights reserved.
19
Product Use Method
Set the temperature of operationor stop of fan.
Button
Read - Read setting point of product.
Write - Save setting point to product.
Fan speed - A/B/C/D Set between product and communication port.
Set Max. or Min. brightnessof each lamp. Update new firmware.
Table of contents
