Avsl 160.449 User manual

1/2
USER INSTRUCTIONS
Thank you for using our professional 160.449 fog
machine. It can be used for DISCO party or vocal concert or
any other to produce a fantastic effect. A remote control can
make you use the fixture more easily and more conveniently.
SPECIFICATIONS
Rating Voltage: AC 230V, 50Hz
Fuse: F3.15A, 250V
Heater Power: 400W
Lamp: halogen 35W
Preheat Time: 3-5 Minutes
Fog Output: 1800 CFM
Tank Capacity: 0.4 Litre
Standard Remote: FWC-2,ON/OFF
Size: L280 x W 250 x H110mm
Weight: 2.2kg
Ambient Temperature: -10 °- 45C°
FEATURE
The 160.449 fog machine is a fixture which can produce fantastic effect
in a home party or vocal concert. It can be used in household or business
place. It is designed with the following feature:
1) Fog mixed with fire beams of various colour balance;
2) Fog sprays vertically with the ground;
3) Plastic housing;
4) Easy to use and move;
Operation Directions

2/2
1.Remove all the packing before use. Please contact with your vendor if
you find any destroyed or missing parts.
2.Place the machine horizontally and loose the tank lid to pour the high
quality fogger liquid.
3.Connect the machine with proper power supply (AC 230V, 50Hz).
4.Plug the remote control into the machine.
5.When the indictor of the remote control light on, you can press the
control button if you want it to spray fog.
6. It is normal for your fogger to have a recycling period, that is the unit
shuts itself down for a short period in order to heat up to temperature
after long bursts. During this time no fog can be produced. When the unit
is ready for action again, the red indictor on the remote control will
illuminate.
7.Turn off the switch when you want to stop spraying.
8.Unscrew 3 base screws and remove reflected bowl, then change the lamp
of the same specified.
Note: The lamp comes ON only when the smoke machine is activated.
Maintenance & Servicing
1.Unsuitable fogger liquid may result in blockages or leakage. Please
choose and use Skytronic high quality fog liquid.
2.Please clean the machine after not more than 40 hours with the mixture
consisting of 80% pure water and 20% vinegar as follows.
1) Before using, dismantle and clean the filter with vinegar to ensure
there is no remainder.
2) Empty the tank, and then pour in clean liquid instead of fogger liquid
again for next operation.
3) Assemble the filter and pour in the fogger liquid again for next
operation.
3.Cut off the power when you pour fogger liquid, and check liquid, fuse,
control switch and power plug carefully.
4.If no exceptions turn on and push the button 30 seconds, if no fog sprays.
Please contact with your vendor.
5.For long idleness be sure to unplug the power.
6.Ensure of the periodical cleansing of the lens for better light effect.