AXIBO PT4 User manual

Thank you for choosing us to help you in your creation journey. To get
rolling in under 5 mins, check out the following video.
PT4 & S3
PAN & TILT v4.0 SLIDER v3.0
USER'S MANUAL
axibo.com/hello

TABLE OF CONTENTS
1 What's in the box
2System assembly A
3System assembly B
4System assembly C
5Gamepad parallax
6Using APP
7Usage warnings

WHAT'S IN THE BOX
1
2
3
4
5
Motorized Slider
Pan/Tilt Head
Power Cables
Adjustable Mounts
Edge Compute
Module (ECM)
6Controller

SYSTEM ASSEMBLY
STEP 1
LOOSEN FOLDING KNOBS & UNFOLD PT4
STEP 2
SET THE DESIRED ANGLE, TIGHTEN KNOBS

SYSTEM ASSEMBLY
STEP 3
UNFOLD MOUNTING BRACKETS AS SHOWN ABOVE
STEP 4
ATTACH MOUNTING BRACKETS TO PT UNIT

SYSTEM ASSEMBLY
STEP 5
INSTALL CAMERA ON MOUNT USING BOTTOM KNOB
STEP 6
INSTALL CONTROLLER WITH CLIP ON PT4

SYSTEM ASSEMBLY
STEP 7
MOUNT PT SYSTEM ON SLIDER USING KNOB UNDER SLIDER
PLATE.
NOTE: CAN MOUNT DIRECTLY TO TRIPOD ALSO, IF NO
SLIDER REQUIRED
OR

SYSTEM ASSEMBLY
STEP 6
PLUG IN ALL LINK CABLES TO BLACK CONNECTORS ON ECM.
POWER WITH BATTERIES OR DC POWER SUPPLY (FRONT
CONNECTOR ON ECM).
NOTE: THE LOWEST (6TH) CONNECTOR IS STRICTLY FOR ETHERNET &
NOT TO POWER MOTOR MODULES.

"HELLO AXIBO" GUIDE
JOG PT FREE JOG
PRECISE
JOG
(*W/ L1 HOLD)
SLIDE TO
MIN & MAX
HOLD = SET POINT 1
CLICK = GO TO POINT 1
PLAY KEY-FRAMES
WITH LOOPING
PLAY KEY-FRAMES
WITH REPEAT
STOP ALL
LET'S SET UP A PARALLAX!
STEP 1 - SET UP FIRST POINT
First let's send the slider to one end, we can do this by clicking the left key in arrow pad *(2). Now let's move the pan-tilt by
holding down L-1 & using Joystick *(1) or arrow keys in *(2) to jog the pan & tilt around. To set a point hold down square
you will controller led blink blue if point is successfully saved.
STEP 2 - SET UP SECOND POINT
Hit the right arrow key on the arrow pad *(2) this should move the slider to the opposite end. Jog the pan tilt as we did in
step 1 to a position you like. To set a point hold down circle you will controller led blink blue if point is successfully saved.
STEP 3 - CONFIRM POINTS ARE GOOD
You can click circle or square to send the system to the saved positions to make sure these positions are good.
STEP 4 - PLAY KEY-FRAMES!
Simply click circle & this will launch key frames in looping mode. VOILÀ you are finished :)
2
JOG FOCUS &
ZOOM
(OPTIONAL)
NOTES:
- CONTROLLER COMES PRE-PAIRED & APP IS NOT REQUIRED FOR THIS TUTORIAL
- JOG REFERES TO ANY MOVEMENT ON THE SYSTEM (PAN, TILT, SLIDE)
1
L1/R1- JOG ENABLE
(HOLD + Joystick = Move))
PRESS TO
POWER ON &
LONG
HOLD TO
POWER OFF
HOLD = SET POINT 2
CLICK = GO TO POINT 2

ACCESSING APP
Our APP is what is known as a 'web app', to access it you simply need a browser
(chrome recommended). Being a web app, it is universally compatible with all
devices.
LCD on side can be used to see if system is on
SSID: AXIBO-xxxxxxx
PASS: AXIBO12345
Open your web browser & go to the link 10.42.0.1
Step 1:
Ensure the system is powered on & cables are connected to all axes
a.
Step 2:
On your device (phone/computer/psp) open WiFi connections & connect to
the WiFi the system is hosting
a.
b.
Step 3:
a.

WARNINGS
"AXIBO INC" is not responsible for how it's systems are used in any context. It
ceases responsibilities from any misuse, injury, damages incurred through it's use.
*Avoid dropping or causing physical damage to any components
*Strictly use the power supply original provided
*Temperature & humidity related conditions may effect the performance of the system
*If your system is unresponsive, power off completely & restart
*Do not tamper with device internals, attempt at disassembly of internals will lead to faulty
performance
*Avoid water interaction with device