AXIMCom X-108NX User manual

i
X-108NX
English Version 2.0.7

i
CONTENT
CHAPTER1 INTRODUCTION..............................................................................................................1
1.1 BENEFITS .................................................................................................................................. 1
1.2 PACKAGE CONTENT ............................................................................................................. 2
CHAPTER2 HARDWARE INSTALLATION...........................................................................................5
2.1 PANEL LAYOUT ....................................................................................................................... 5
2.1.1 Front LEDs....................................................................................................................... 5
2.1.2 Side Panel...................................................................................................................... 6
2.1.3 Rear Panel ..................................................................................................................... 6
2.2 PROCEDURE FOR HARDWARE INSTALLATION.................................................................... 7
2.2.1 Power On....................................................................................................................... 7
2.2.2 Setup LAN Connection................................................................................................ 7
2.2.3 Setup WAN Connection.............................................................................................. 7
CHAPTER3 NETWORK SETTINGS FOR YOUR PC .............................................................................8
3.1 FOR WINDOWS XP USERS...................................................................................................... 8
3.2 FOR WINDOWS 2000 USERS................................................................................................ 10
3.3 FOR WINDOWS 98/ME USERS ............................................................................................. 12
3.1 FOR WINDOWS7 USERS ....................................................................................................... 14
CHAPTER4 ACCESSING TO AXIMCom X-ROUTER ......................................................................16
4.1 START-UP AND LOG-IN ........................................................................................................ 16
CHAPTER5 BASIC SETTINGS............................................................................................................17
5.1 WAN SETUP ........................................................................................................................... 17
5.1.1 DHCP (automatic IP address assignment) ............................................................. 19
5.1.2 Static (Fixed IP address assignment) ....................................................................... 20
5.1.3 PPPoE (connected by username/password) ........................................................ 21
5.1.4 Mobile WAN (connected by information related to what your ISP needs) ..... 22
5.1.5 Windows Mobile / Google Android Phones / iPhone .......................................... 24
5.1.6 HSPA+ Super Speed ................................................................................................... 25
5.2 WAN DETECT ........................................................................................................................ 27
5.3 LAN SETUP ............................................................................................................................. 28
5.4 ROUTING SETUP .................................................................................................................... 29
5.4.1 Routing Settings .......................................................................................................... 29
5.4.2 Add Routing Rule ....................................................................................................... 30
5.4.3 Example ....................................................................................................................... 31
5.5 DHCP SERVER SETUP............................................................................................................ 32
5.6 DDNS SETUP .......................................................................................................................... 33
5.7 MAC ADDRESS CLONE SETUP ............................................................................................ 35

ii
CHAPTER6 WIRELESS SETTINGS ......................................................................................................36
6.1 BASIC SETUP.......................................................................................................................... 36
6.1.1 Settings......................................................................................................................... 36
6.1.2 SSID Settings................................................................................................................. 38
6.1.3 WEP............................................................................................................................... 40
6.1.4 WPA Pre-shared Key / WPA2 Pre-shared Key ........................................................ 40
6.1.5 WPA / WPA2................................................................................................................ 42
6.2 ADVANCED SETUP ............................................................................................................... 43
6.3 WDS SETUP ............................................................................................................................ 45
6.4 UNIVERSAL REPEATER SETUP ............................................................................................... 46
CHAPTER7 SECURITY SETTINGS ......................................................................................................47
7.1 FIREWALL SETUP.................................................................................................................... 47
7.2 ACCESS CONTROL LIST (ACL) SETUP................................................................................. 49
7.2.1 ACL Settings ................................................................................................................ 49
7.3 MAC ACCESS CONTROL SETUP......................................................................................... 52
7.4 OpenDNS SETUP .................................................................................................................. 54
7.4.1 OpenDNS Settings ...................................................................................................... 54
7.5 WEB FILTERING SETUP........................................................................................................... 55
7.5.1 Added Web Filtering Rules........................................................................................ 56
7.6 VPN / PPTP SETUP................................................................................................................. 57
7.6.1 VPN / PPTP Settings .................................................................................................... 57
7.6.2 Add VPN / PPTP Rule.................................................................................................. 59
CHAPTER8 INTELLIGENT DYNAMIC BANDWIDTH MANAGEMENT .............................................60
8.1 iDBM SETUP ........................................................................................................................... 60
8.1.1 iDBM Settings............................................................................................................... 60
8.1.2 Add SBM Rules ............................................................................................................ 63
8.1.3 Add DBM Rule............................................................................................................. 66
8.2 THROUGHPUT OPTIMIZER .................................................................................................... 67
8.3 TurboNAT SETUP ................................................................................................................... 68
8.4 SESSION MANAGER............................................................................................................. 69
CHAPTER9 APPLICATIONS SETTINGS.............................................................................................70
9.1 PORT RANGE FORWARD SETUP ......................................................................................... 70
9.1.1 Port Range Forward Settings .................................................................................... 71
9.1.2 Add Port Range Forwarding Rule............................................................................ 72
9.2 STREAMING/VPN PASS-THROUGH..................................................................................... 73
9.3 UPnP/NAT-PMP SETUP ......................................................................................................... 74
CHAPTER10 STORAGE FUNCTION SETTINGs ..................................................................................75
10.1 STORAGE DEVICE ................................................................................................................ 75
10.1.1 USB Storage Device Installation ............................................................................... 75

iii
10.1.2 Storage Formatting .................................................................................................... 77
10.1.3 Ejecting of the Storage Device................................................................................ 78
10.2 FTP SERVER............................................................................................................................ 79
10.3 SAMBA SERVER..................................................................................................................... 80
CHAPTER11 ADMIN ..........................................................................................................................81
11.1 MANAGEMENT..................................................................................................................... 81
11.2 SYSTEM UTILITIES.................................................................................................................... 83
11.3 TIME SETUP ............................................................................................................................ 85
CHAPTER12 STATUS...........................................................................................................................86
12.1 ROUTER INFORMATION ....................................................................................................... 86
12.2 USER/DHCP........................................................................................................................... 88
12.3 USER/ CURRENT.................................................................................................................... 89
12.4 LOG ....................................................................................................................................... 90

1
CHAPTER1 INTRODUCTION
AXIMCom‟s X series Router is a new design for users that have multiple requirements. The X-Router combined
different aspect of features in a single box, such as 3G/4G sharing and storage functions.
AXIMCom aims to give the users the most cost effective and best performance products. The X-Router, says
Transformable Router, can be changed into different working mode anytime and anywhere. In 3G/4G mode,
simply connecting a 3G/4G modem, you can create a mobile broadband for a group of users and devices to
share. Since the mobile broadband is shared, the „cost per user/device‟ is then consequently reduced. In
storage mode, simply connecting a USB storage device, you can create a mini network file sharing system to
share the files by the X-Router. Furthermore, AXIMCom‟s X-Router Series also supports 802.11n technology, so you
can enjoy the fastest and farthest wireless coverage! The higher-end models to be released will equipped with
more switch modes such as Radio Station, VPN Server, Print Server, etc, and will let users to choose which is
needed by them.
1.1 BENEFITS
System Mode Switch
AXIMCom‟s X series router allows user to change its working mode anytime and anywhere. User can
operate the Router met their user scenarios.
True Mobile Broadband Sharing (Support 3G/4G + 802.11n + xDSL/cable modem)
AXIMCom X-Router working in 3G/4G mode supports multiple broadband technologies, including 3G/4G,
802.11n and xDSL/cable modem. You can create a mobile broadband using a 3G/4G modem or switch to
fixed line connection using xDSL/cable modem. It also supports the latest 802.11n technology, offering a
true mobile broadband sharing solution!
Complete 3G/4G Modem Support
AXIMCom‟s X-Router provides complete support for all major 3G/4G USB modems. Simply use your existing
3G/4G modem and service provider to create a mobile broadband sharing environment. (Find our
compatibility at the end of the user manual.)
Energy Saving
With the low power consumption SOC chip adopted, AXIMCom X-Router provides a lower power
consumption ability which saves not only energy, but also our environments.
3G/4G APN and PIN Code Support
AXIMCom X-Router supports 3G/4G APN and PIN code in order to prevent unauthorized access to your

2
X-Router and increase the security levels of your mobile broadband.
Universal Repeater
With the use of the University Repeater function, AXIMCom X-Router can enlarge your wireless coverage
and eliminate dead spots in just a few steps. Hence, this allows users to be free from the hassles from the
extremely complicated WDS settings.
Session Manager
AXIMCom X-Router supports up to 50000 fast recycling sessions in order to guarantee stable network
connection and to accommodate more users/applications in the network. (Session numbers vary between
models.)
Gigabit Ethernet supported (Applied toX-108NX and X-116NX Only)
The X-Router equipped with Gigabit Ethernet as well as 950Mbps NAT throughput features which really met
the requirements for Gigabit environment.
iDBM - Intelligent Bandwidth Management (Applied toX-108NX and X-116NX Only)
Enabled with AXIMCom‟s patent-pending iDBM technology, AXIMCom X-Router‟s two highest level models,
is able to automatically monitor your bandwidth usage, prioritize traffic, and allocates bandwidth to all
applications and users. At the same time, it also is able to provide users with the freedom to customize their
bandwidth allocation to meet their desired special requirements. In short, iDBM is able to grant a smooth
and efficient network sharing system no matter the circumstances or usage scenario.
TurboNAT (Applied to X-108NX and X-116NX Only)
Embedded with the TurboNAT Engine, AXIMCom X-Router‟s two premium models are able to increase NAT
throughput to 950Mbps.
MRTG Monitoring (Applied to X-108NX and X-116NX Only)
Providing Throughput and Session MRTG graphs within the Graphic User Interface, this allows users to
monitor bandwidth usage without difficulty and manage the network with total convenience and ease.
PPTP Server
With PPTP server enabled, this function provides a secured data connection in the most convenient way for
the X108NX and X-116NX.
1.2 PACKAGE CONTENT
One AXIMCom X-Router
One User Manual CD
One Quick Installation Guide
One Power Adaptor
Two Dipole Antenna

3

5
CHAPTER2 HARDWARE INSTALLATION
2.1 PANEL LAYOUT
2.1.1Front LEDs
LED
Function
Color
Status
Description
WAN
WAN
Activity
Green/
Red
On
The WAN port is linked
Off
The LAN port is not linked
Blinking
Data is being transmitted via the LAN port
(LAN) 1-4
LAN
Activity
Green/
Red
On
The LAN port is linked
Off
The LAN port is not linked
Blinking
Data is being transmitted via the LAN port
WLAN
Wireless
Activity
Green
On
Wireless connection is enabled
Off
Wireless connection is disabled
Status
Router
status
indication
Green
On
USB device is working.
Off
No USB device is detected.
Fast Blinking
USB device is being initialized or is being ejecting
Slow Blinking
System is booting up and will turn off after booting.
Please contact AXIMCom if the LED is continuous in this
status.
Power
Power
Indication
Green
On
Power is on
Off
Power is off
***The Red LED of WAN and LAN ports are enabled when links to the device that has gigabit ability.
Port
Description
USB
The port for connecting your USB 3G/4G modem or USB storage device

6
2.1.2Side Panel
Buttons/Port
Description
WLAN On/Off
The button for turn on/off the wireless radio.
EJECT
The button for ejecting the USB 3G/4G modem safely, not for WPS setting.
Reset
The Reset button is on the bottom of the router. Press the button for 3 seconds, AXIMCom
X-Router will restore all the setting values to factory default and restart automatically.
2.1.3Rear Panel
Ports/Button
Description
Power
Power inlet
WAN
The port for connecting your xDSL or Cable Modem
LAN
The ports for connecting your computers, printer or other devices for making a wired
connection
On/Off
Press the button to switch On/Off the power

7
2.2 PROCEDURE FOR HARDWARE INSTALLATION
2.2.1Power On
Take the provided power adapter. Plug one end into the X-Router‟s DC power port and the other end into a
power outlet. Switching on the On/Off switch, the X-Router will enter the working mode as soon as its STATUS LED
light is constantly on.
2.2.2Setup LAN Connection
Take an Ethernet cable. Plug one end of the cable into your computer‟s network port and the other end into
one of the X-Router‟s LAN ports.
2.2.3Setup WAN Connection
Choose how to connect AXIMCom X- Router to the Internet. Choose one way below to connect your X-Router
to the Internet.
A.B. Connecting via mobile Internet: please plug the 3G/4G USB modem or connect mobile phone into the
router’s USB port.
C. Connecting via ADSL, VDSL or cable modem: take another Ethernet cable. Plug one end into your modem‟s
LAN port and the other end into the router‟s WAN port.
Please note that 3G/4G connection mode (AB) is not supported in the storage mode.

8
CHAPTER3 NETWORK SETTINGS FOR YOUR PC
Before using the AXIMCom X-Router, you have to configure your network settings in your computer. You can
either use DHCP or Static IP for your TCP/IP Settings.
* DHCP is recommended due to its relative ease in configuration.
3.1 FOR WINDOWS XP USERS
1. Select Start > Settings > Network Connections
2. Click on Local Area Connection and choose Properties. You will now see the following screen.
3. Select Internet Protocol (TCP/IP) for your network card.
4. Click on Properties. You will see the following screen.

9
5. Enable DHCP or Static IP:
To use DHCP
Select Obtain an IP Address automatically and Obtain DNS server address automatically.
Then click OK. AXIMCom X-Router will now assign an IP address to your computer.
To use Static IP
Select Use the following IP address and enter the followings.
IP address: 192.168.1.x (x could be from 2 ~ 254)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Now select Use the following DNS server addresses and enter the following.
Preferred DNS server: 192.168.1.1. Then click OK.
6. You have now finished the network settings for your computer. Please go to Chapter 4 to continue.

10
3.2 FOR WINDOWS 2000 USERS
1. Select Start > Settings > Network and Dial-up Connection
2. Right click on the Local Area Connection and select Properties. You will see the following screen.
3. Select the Internet Protocol (TCP/IP) for your network card.
4. Click on Properties. You will see the following screen.

11
5. Enable DHCP or Static IP:
To use DHCP
Select Obtain an IP Address automatically and Obtain DNS server address automatically.
Then click OK. AXIMCom X-Router will now assign an IP address to your computer.
To use Static IP
Select Use the following IP address and enter the followings.
IP address: 192.168.1.x (x could be from 2 ~ 254)
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Now select Use the following DNS server addresses and enter the following. Preferred DNS server: 192.168.1.1
Then click OK.
6. You have now finished the network settings of your computer. Please go to Chapter 4 to continue.

12
3.3 FOR WINDOWS 98/ME USERS
1. Select Start > Settings > Network. You will see the following screen.
2. Select TCP/IP -> PCI Fast Ethernet Adapter for your network card.
3. Click on Properties. You will now the following screen.
4. Enable DHCP or Static IP:
To use DHCP
Select Obtain an IP Address automatically.
Then click OK. AXIMCom X-Router will now assign an IP address to your computer.

13
To use Static IP
Select Specify an IP address and enter the followings.
IP address: 192.168.1.x (x could be from 2 ~ 254)
Subnet mask: 255.255.255.0
Now click on Gateway tab. You will see the following screen.
Enter 192.168.1.1 in New Gateway, and click Add.
Now click on the DNS Configuration tab. You will see the following screen.
Enter 192.168.1.1 in DNS Server Search Order and click Add. Then click OK.
5. You have now finished the network settings of your computer. Please go to Chapter 4 to continue.

14
3.1 FOR WINDOWS7 USERS
1. Select Start > Control Panel > Network and Internet> Network and Sharing Center >Change Adater
Settings
2. Click on Local Area Connection and choose Properties. You will now see the following screen.
3. Select Internet Protocol (TCP/IP) for your network card.
4. Click on Properties. You will see the following screen.

15
5. Enable DHCP or Static IP:

16
CHAPTER4 ACCESSING TO AXIMCom X-ROUTER
For Windows XP/2000 users, your computer should have obtained an IP address after configuring the network
settings on your computer. Now you need to configure your AXIMCom X- Router.
4.1 START-UP AND LOG-IN
Open your WEB browser. In the address box, enter [HTTP://192.168.1.1:8080]
When you successfully connect to the configuration interface for AXIMCom X-Router, the login screen will pop
up.
Enter your username as [admin], your password as [admin] and select the preferred language. You will now see
the start page of AXIMCom X-Router.