AXIOMTEK tBOX324-894 User manual

4 9416N324010E
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A2 December 2017
Printed in Taiwan
DRAM Installation
Step 1 Make sure system power is off. Loosen the lateral cover
screws to remove the cover as shown.
Step 2 Loosen the lateral screws as shown.
Step 3 Pull out the front bezel and the internal bracket as shown.
Step 4 Remove the DRAM cover by loosening the screws. Install
DRAM and then stick the thermal pad on it.
Step 5 Secure the DRAM cover by fastening the screws, and then
install the internal bracket and the front bezel. Fasten the
lateral screws as shown to complete the installation.
tBOX324-894 Quick Installation Guide
9416N324010E 1
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A2 December 2017
Printed in Taiwan
Checklist
Standard Accessories Optional Accessories

tBOX324
-
894
System U
nit
x
1

SATA
D
rive (
HDD
or
SSD
)

Quick I
nstallation
G
uide x 1

PCI Express Mini Card

CD x 1 (w/
Driver & Manual)

Remote Switch C
able

Foot Pad x 4

M12 LAN C
able
Screws Pack x 1 Wireless Module
Wall Mount Bracket x 1 M12 Power Cable
SATA Drive Key x 2
DRAM Thermal Pad x 4

D
C
-
IN
C
onnector
Note: Please contact your local supplier immediately if any of the above-
mentioned items is missing or damaged.
Dimensions
tBOX324-894
tBOX324-894 Transportation Fanless Em edded System

2 9416N324010E
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A2 December 2017
Printed in Taiwan
I/O Outlets
Front View
Rear View
9416N324010E 3
© Copyright 2017 Axiomtek Co., Ltd.
Ver ion A2 December 2017
Printed in Taiwan
Hardware Installation
SATA drive and CFast Installation
Step 1 Make sure system power is off. Loosen the screws of the
SATA drive tray and then pull out the tray as shown.
Step 2 Slide an HDD into the tray as shown in the picture. Insert
screws into each side of the SATA drive through the
corresponding holes and fasten the screws firmly.
Step 3 Insert the SATA drive and then the CFast into their slots
respectively, as shown in the pictures
Step 4 Secure CFast and SATA drive by fastening all of the screws
tightly to complete the installation.
Mini PCIe module and SIM card Installation
Step 1 Make sure system power is off. Loosen the lateral cover
screws to remove the cover as shown.
Step 2 Install the SIM card or Mini PCIe module and fasten screws.
Notice the signal support type of the mini card slot when
installing the card. Fasten screws.